☆ 4.6 Article

Mechanical Performance of Flax Fiber Composites with Waste Glass Fibers as a Core Structure

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Investigation into the fatigue properties of flax fibre epoxy composites and hybrid composites based on flax and glass fibres

Antigoni Barouni et al.

Summary: This study investigates the fatigue behavior of composite laminates with flax and glass fiber hybrid reinforcements. The hybrid configuration shows a great effect on fatigue life, with the alternating layers of flax and glass demonstrating the best performance and significantly lower probability of failure compared to other configurations. Fabrication-induced defects and fiber-matrix interface also play a role in influencing fatigue life and overall performance of the structures.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical characterisation of pneumatically-spliced carbon fibre yarns as reinforcements for polymer composites

James R. Davidson et al.

Summary: The study investigates the mechanical response of pneumatically-spliced carbon fiber yarns as a potential reinforcing material for polymer composites. Results show that pneumatic splicing provides a high strength and sustainable solution for reinforcing polymers with discontinuous carbon fiber yarns, which can be used in weaving, braiding, non-crimp fabrics, or 3D printing applications. Further research on quasi-continuous yarns remanufactured by splicing waste fibers could offer a novel material for various applications.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Assessment of performance degradation of hybrid flax-glass fiber reinforced epoxy composites during a salt spray fog/dry aging cycle

V. Fiore et al.

Summary: The main goal of this study is to evaluate the reversibility of hybrid composite performances after being aged in a salt-fog environment and dried. The results show that the dry phase allows for almost complete recovery of the composite properties, albeit with some loss in strength.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Mechanical, fatigue and DMA behaviour of high content cellulosic corn husk fibre and orange peel biochar epoxy biocomposite: A greener material for cleaner production

Hassan Alshahrani et al.

Summary: This study developed a high toughness biocomposite cleaner production material for advanced engineering applications. The research focused on understanding the effect of adding high cellulose content corn husk fibre and sustainable orange peel biochar on the mechanical properties of the epoxy based clear production composite material. It was found that the composite with 2 vol% orange peel biochar and 40 vol% high content cellulosic corn husk fibre exhibited the highest storage modulus and the lowest loss factor. The presence of cellulose content in the fibre improved the toughness and reduced brittleness of the epoxy.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Flax fiber for technical textile: A life cycle inventory

Alejandra Gomez-Campos et al.

Summary: The study assesses the impact of producing and transforming flax fiber, providing a detailed life cycle inventory. Environmental performance analysis shows that agricultural activities and electricity production are the major contributors to the environmental impacts of flax technical textile production.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Polymer Science

Mechanical properties of carbon nanotubes/epoxy nanocomposites: Pre-curing, curing temperature, and cooling rate

Hermawan Judawisastra et al.

Summary: This study investigated the effects of composite fabrication, such as pre-curing, curing temperature, and cooling rate, on the mechanical properties of Multi-Walled Carbon Nanotubes (MWCNTs) and epoxy resin composites. Pre-curing improved bonding between MWCNTs and epoxy, while elevated curing temperature and rapid cooling further enhanced mechanical properties through increased interfacial bonding and prevention of re-agglomeration of MWCNTs. Characterization techniques such as Raman spectroscopy, Fourier Transform Infrared Spectroscopy, and scanning electron microscopy were employed to study the bonding between MWCNTs and epoxy, as well as the agglomeration of MWCNTs. Tensile testing, FTIR, and Differential Thermal Analysis were used for mechanical properties characterization and degree of cure determination.

HIGH PERFORMANCE POLYMERS (2021)

添加到收藏夹

Review Engineering, Environmental

Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes

Esfandiar Pakdel et al.

Summary: Carbon fibre reinforced composites play a crucial role in weight sensitive industries, emphasizing the importance of developing sustainable recycling solutions. Management of dry carbon fibre scraps has gained more attention recently, highlighting the need for effective strategies in dealing with waste products.

RESOURCES CONSERVATION AND RECYCLING (2021)

添加到收藏夹

Article Polymer Science

Enhanced Impact Strength of Recycled PET/Glass Fiber Composites

Marco Monti et al.

Summary: This study improved the impact strength of fiber-reinforced composite based on recycled poly(ethylene terephthalate) by using different ethylene copolymers, leading to the design of a composite with substantially improved properties.

POLYMERS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of Long fibre thermoplastic (LFT) composites

Haibin Ning et al.

INTERNATIONAL MATERIALS REVIEWS (2020)

添加到收藏夹

Review Polymer Science

A Review on the Potential and Limitations of Recyclable Thermosets for Structural Applications

Wouter Post et al.

POLYMER REVIEWS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Tensile properties and interfacial shear strength of recycled fibers from wind turbine waste

Amirmohammad Rahimizadeh et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment

Guilong Wang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Materials Science, Composites

Tensile behaviour of hybrid fibre architectures of randomly oriented strands combined with laminate groups

Swaroop B. Visweswaraiah et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

Mode-I interlaminar fracture toughness of flax, glass and hybrid flax-glass fibre woven composites: Failure mechanism evaluation using acoustic emission analysis

El Hadi Saidane et al.

POLYMER TESTING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile, physical and morphological properties of oil palm empty fruit bunch/sugarcane bagasse fibre reinforced phenolic hybrid composites

Nor Azlina Ramlee et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Mechanics

Damage investigation and assessment due to low-velocity impact on flax/glass hybrid composite plates

Antigoni K. Barouni et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Influence of resin curing cycle on the characterization of the tensile properties of flax fibers by impregnated fiber bundle test

Anurag Pisupati et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Review Materials Science, Composites

Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance

Mahoor Mehdikhani et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Comparative Life Cycle Assessment of gypsum plasterboard and a new kind of bio-based epoxy composite containing different natural fibers

A. Quintana et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexural behaviour of corrugated panels of self-reinforced polypropylene hybridised with carbon fibre: An experimental and modelling study

Francisco Mesquita et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Composites

Carbon fibre reinforced thermoplastic composites developed from innovative hybrid yarn structures consisting of staple carbon fibres and polyamide 6 fibres

M. M. B. Hasan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Composites

Modelling of mechanical properties of randomly oriented strand thermoplastic composites

Marina Selezneva et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental characterization of short flax fiber mat composites: tensile and flexural properties and damage analysis using acoustic emission

Mohamed Habibi et al.

JOURNAL OF MATERIALS SCIENCE (2017)

添加到收藏夹

Article Engineering, Manufacturing

Exploring the potential of waste leaf sheath date palm fibres for composite reinforcement through a structural and mechanical analysis

Alain Bourmaud et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

添加到收藏夹

Article Mechanics

Interlaminar shear behaviour of hybrid fibre architectures of randomly oriented strands combined with laminate groups

Swaroop B. Visweswaraiah et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Materials Science, Composites

Manufacturing cost relationships for vacuum bag-only prepreg processing

Timotei Centea et al.

JOURNAL OF COMPOSITE MATERIALS (2016)

添加到收藏夹

Article Engineering, Manufacturing

Regenerating the strength of thermally recycled glass fibres using hot sodium hydroxide

J. L. Thomason et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Manufacturing

Compression moulding of Carbon/PEEK Randomly-Oriented Strands composites: A 2D Finite Element model to predict the squeeze flow behaviour

Gilles-Philippe Picher-Martel et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Tensile and flexural properties of graphene oxide coated-short glass fiber reinforced polyethersulfone composites

Sen-Sen Du et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Manufacturing

Interstrand void content evolution in compression moulding of randomly oriented strands (ROS) of thermoplastic composites

Arthur Levy et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Engineering, Manufacturing

The impact of air evacuation on the impregnation time of Out-of-Autoclave prepregs

T. Kourkoutsaki et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexural properties of fully biodegradable alpha-grass fibers reinforced starch-based thermoplastics

F. X. Espinach et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Agricultural Engineering

Environmental aspects of fiber crops cultivation and use

Ana Luisa Fernando et al.

INDUSTRIAL CROPS AND PRODUCTS (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties

Geraldine Oliveux et al.

PROGRESS IN MATERIALS SCIENCE (2015)

添加到收藏夹

Review Engineering, Manufacturing

Fibre hybridisation in polymer composites: A review

Yentl Swolfs et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

添加到收藏夹

Review Engineering, Multidisciplinary

Flax fibre and its composites - A review

Libo Yan et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Engineering, Manufacturing

Flexural properties of hemp fibre reinforced polylactide and unsaturated polyester composites

Moyeenuddin A. Sawpan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Article Chemistry, Applied

Environmental Impact Analysis of the Production of Flax Fibres to be Used as Composite Material Reinforcement

Antoine Le Duigou et al.

JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2011)

添加到收藏夹

Article Materials Science, Textiles

Energy Use in the Production of Flax Fiber for the Reinforcement of Composites

Nilmini P. J. Dissanayake et al.

JOURNAL OF NATURAL FIBERS (2009)

添加到收藏夹

Article Agricultural Engineering

The environmental impacts of the production of hemp and flax textile yarn

Hayo M. G. van der Werf et al.

INDUSTRIAL CROPS AND PRODUCTS (2008)

添加到收藏夹

Article Materials Science, Characterization & Testing

Press forming of short natural fiber-reinforced biodegradable resin: Effects of fiber volume and length on flexural properties

S Shibata et al.

POLYMER TESTING (2005)

添加到收藏夹

Article Materials Science, Composites

Natural fibres: can they replace glass in fibre reinforced plastics?

P Wambua et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Engineering, Environmental

Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics

T Corbière-Nicollier et al.

RESOURCES CONSERVATION AND RECYCLING (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.