☆ 4.6 Article

Plasticity Improvement in a Co-Rich Co40Fe25Cr20Ni15 High-Entropy Alloy via Al Alloying

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Multi-scale modeling method for polycrystalline materials considering grain boundary misorientation angle

Youle Zhao et al.

Summary: This paper presents a multi-scale modeling method considering grain boundary misorientation angle (GBMA) to accurately describe the mechanical behavior of polycrystalline materials. By comprehensively considering GBMA information at grain and atomic scales, the proposed method achieves high simulation accuracy. Furthermore, models with different GBMAs were established to study their influence on the mechanical properties of polycrystalline materials.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influences of grain size, temperature, and strain rate on mechanical properties of Al0.3CoCrFeNi high-entropy alloys

Thi-Nhai Vu et al.

Summary: This study investigates the mechanical properties and deformation behaviours of Al0.3CoCrFeNi high-entropy alloys (HEA) under tension tests by using molecular dynamics simulations. The effect of different grain sizes, temperatures, and strain rates are examined. The results show that grain size has a significant influence on the mechanical properties of the alloy, with different deformation mechanisms observed in the inverse Hall-Petch and Hall-Petch regimes.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition

Rita Babicheva et al.

Summary: A method combining molecular dynamics (MD) and Monte Carlo (MC) simulation was used to analyze the short-range ordering and grain boundary (GB) segregation in the bi-crystals of equiatomic CoCrFeNi and Al (8 at%)-CoCrFeNi high-entropy alloys (HEAs). The study found that the GB segregation greatly influences the deformation behavior of the alloys, with aluminum atom segregation increasing the shear yield strength.

COMPUTATIONAL MATERIALS SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Microstructure and properties of a Co-free Fe50Mn27Ni10Cr13 high entropy alloy

Raymond Kwesi Nutor et al.

Summary: The research focused on the microstructure, mechanical, and corrosion properties of a cost-effective HEA alloy, demonstrating excellent strength and ductility due to the formation of stacking faults and nano-twins during tensile deformation. The alloy also exhibited good corrosion resistance, mainly dependent on the amount of Mn-oxide in the passive film.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Investigation of aluminum concentration on stacking fault energies of hexagonal close-packed high-entropy alloys Hf0.25Ti0.25Zr0.25Sc0.25-xAlx (x < 15%)

Xiao-Tao Chen et al.

Summary: The addition of aluminum reduces the stacking fault energy of hexagonal close-packed high-entropy alloys, improving ductility, creep resistance, and yield strength. Replacing Sc with Al enhances the covalent bonding and reduces energy difference during sliding, lowering the SFE.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of annealing temperatures on microstructure and deformation behavior of Al0.1CrFeCoNi high-entropy alloy

S. W. Wu et al.

Summary: The study explored the microstructure and deformation behavior of the Al0.1CrFeCoNi high-entropy alloy at different annealing temperatures, revealing that the 873 K-annealed specimens exhibited a good combination of strength and ductility. The relationship between yield strength and average grain sizes followed the Hall-Petch equation with a high Hall-Petch coefficient. Nanotwinning was found to be the cause of specific regimes in the strain-hardening rate versus true strain curves for different annealed samples.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Magnetically driven short-range order can explain anomalous measurements in CrCoNi

Flynn Walsh et al.

Summary: The presence, nature, and impact of chemical short-range order in the multi-principal element alloy CrCoNi are currently under debate, with first-principles calculations revealing a magnetic origin to this phenomenon. Models based on magnetic interactions are found to explain experimental anomalies, suggesting that short-range order of this type may be more common than previously realized.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2021)

添加到收藏夹

Article Multidisciplinary Sciences

A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range

Raymond Kwesi Nutor et al.

Summary: High-entropy alloys (HEAs) offer promising property combinations and can maintain excellent strength-ductility synergy over a wide temperature range by utilizing multiple deformation mechanisms to enhance material performance.

SCIENCE ADVANCES (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Phase Selection, Lattice Distortions, and Mechanical Properties in High-Entropy Alloys

Raymond Kwesi Nutor et al.

ADVANCED ENGINEERING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Model interatomic potentials for Fe-Ni-Cr-Co-Al high-entropy alloys

Diana Farkas et al.

JOURNAL OF MATERIALS RESEARCH (2020)

添加到收藏夹

Article Chemistry, Physical

Influence of lattice distortion on stacking fault energies of CoCrFeNi and Al-CoCrFeNi high entropy alloys

Shi Qiu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Role of BCC phase on tensile behavior of dual-phase Al0.5CoCrFeMnNi high-entropy alloy at cryogenic temperature

Jeong Min Park et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys

Daixiu Wei et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of strong and ductile metastable face-centered cubic single-phase high-entropy alloys

Daixiu Wei et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Exceptional cryogenic strength-ductility synergy in Al0.3CoCrNi medium-entropy alloy through heterogeneous grain structure and nano-scale precipitates

Praveen Sathiyamoorthi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Contrasting mechanical behavior in precipitation hardenable AlxCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC

Sindhura Gangireddy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys

Zezhou Li et al.

PROGRESS IN MATERIALS SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel Co-rich high entropy alloys with superior tensile properties

Daixiu Wei et al.

MATERIALS RESEARCH LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al0.1CoCrFeNi

X. D. Xu et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Twinning-induced plasticity (TWIP) steels

Bruno C. De Cooman et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Chemistry, Physical

Fracture resistance of high entropy alloys: A review

Weidong Li et al.

INTERMETALLICS (2018)

添加到收藏夹

Article Chemistry, Physical

Stacking fault energy of face-centered-cubic high entropy alloys

S. F. Liu et al.

INTERMETALLICS (2018)

添加到收藏夹

Article Engineering, Mechanical

Temperature dependent strain hardening and fracture behavior of TWIP steel

Manjunatha Madivala et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys

Jun Ding et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

T. Yang et al.

SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy

S. W. Wu et al.

MATERIALS RESEARCH LETTERS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation twinning behaviors of the low stacking fault energy high-entropy alloy: An in-situ TEM study

Jiabin Liu et al.

SCRIPTA MATERIALIA (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fundamental deformation behavior in high-entropy alloys: An overview

H. Y. Diao et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stacking fault energies of face-centered cubic concentrated solid solution alloys

Shijun Zhao et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Theory of strengthening in fcc high entropy alloys

Celine Varvenne et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off

Zhiming Li et al.

NATURE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of a twinning-induced plasticity high entropy alloy

Y. Deng et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels

Seok Su Sohn et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

F. Otto et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Chemistry, Physical

Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys

Woei-Ren Wang et al.

INTERMETALLICS (2012)

添加到收藏夹

Article Chemistry, Physical

The conflicts between strength and toughness

Robert O. Ritchie

NATURE MATERIALS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the mechanism of twin formation in Fe-Mn-C TWIP steels

H. Idrissi et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys

Yih-Farn Kao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Generalized-stacking-fault energy and dislocation properties in bcc Fe:: A first-principles study -: art. no. 174105

JA Yan et al.

PHYSICAL REVIEW B (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.