☆ 4.6 Article

Formation Mechanism of Thicker Intermetallic Compounds in Friction Stir Weld Joints of Dissimilar AA2024/AZ31B Alloys

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

Ultrasonic effects on microstructures and mechanical properties of friction stir weld joints of dissimilar AA2024/AZ31B alloys

Maoju Tan et al.

Summary: Friction stir welding (FSW) and ultrasonic vibration-assisted FSW (UVaFSW) experiments were conducted on AA2024 aluminum alloy and AZ31B magnesium alloy plates to investigate the effects of ultrasonic vibration on the microstructures and mechanical properties of dissimilar joints. The results showed that ultrasonic vibration enhanced the mechanical interlocking degree and reduced the thickness of intermetallic compounds in the weld nugget zone (WNZ), leading to an improved joint tensile strength. The acoustic softening effect of ultrasonic vibration played a more important role than its thermal effect. This research lays a foundation for process optimization and joint quality control in the welding of dissimilar AA2024 and AZ31B alloys, which have great application prospects in aerospace industries.

WELDING IN THE WORLD (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Ultrasonic Vibration on Material Flow and Thermal Cycles in Friction Stir Welding of Dissimilar Al/Mg Alloys

Xueqi Lv et al.

Summary: Ultrasonic vibration can improve the flow behavior of plastic materials in friction stir welding (FSW), reducing heat generation, accelerating heat dissipation, and changing thermal cycles, thereby inhibiting the formation of intermetallic compound layers.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrasonic vibration-induced thinning of intermetallic compound layers in friction stir welding of dissimilar Al/Mg alloys

Junjie Zhao et al.

Summary: Frictions stir welding and ultrasonic vibration enhanced FSW of dissimilar Al/Mg alloys were studied. It was found that the growth of IMC layer was suppressed in UVeFSW due to the improvement of grain recrystallization and the promotion of dislocation consumption, leading to a reduced diffusion rate of atoms.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis and characterization of dynamic recrystallization and grain structure evolution in friction stir welding of aluminum plates

Pengfei Yu et al.

Summary: In this study, a model for numerical simulation of dynamic recrystallization in friction stir welding of aluminum plates was developed using the Monte Carlo method. The predicted evolution of grain structures in the welds showed good agreement with experimentally measured values. The analysis revealed different DRX mechanisms along the material flowing path during friction stir welding, with the tool rotation speed determining the type of DRX that occurs at different positions.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Engineering, Manufacturing

Ultrasonic effect on thickness variations of intermetallic compound layers in friction stir welding of aluminium/magnesium alloys

Junjie Zhao et al.

Summary: The study found that the thickness of IMCs on the transverse cross-section of the weld first increases and then decreases as the depth distance from the top surface of the weld gets larger, reaching the maximum value at a depth of about 1 mm. On the horizontal plane at the upper part of the weld, the thickness of IMCs increases first and then decreases as the distance gets farther from the center of the exit hole, and reaches a stable stage outside the range covered by the shoulder. The application of ultrasonic vibration can reduce the thickness of IMCs in the whole weld and shift the peak value of IMCs thickness to a location nearer the exit hole on horizontal planes at both upper and lower parts of the weld.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Chemistry, Physical

Suppression of intermetallic reaction layer by ultrasonic assistance during friction stir welding of Al and Mg based alloys

Sachin Kumar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Alloy amorphization through nanoscale shear localization at Al-Fe interface

F. C. Liu et al.

MATERIALS TODAY PHYSICS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of research progress on aluminium-magnesium dissimilar friction stir welding

L. H. Shah et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2018)

添加到收藏夹

Article Engineering, Industrial

Weld microstructure and mechanical properties in ultrasonic enhanced friction stir welding of Al alloy to Mg alloy

Xueqi Lv et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancing Friction Stir Weldability of 6061-T6 Al and AZ31B Mg Alloys Assisted by External Non-rotational Shoulder

Shude Ji et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of Microstructure, Mechanical Properties and Corrosion Resistance of Friction Stir-Welded Aluminum and Magnesium Dissimilar Alloys

Jagesvar Verma et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of process parameters on microstructure and mechanical behaviors of friction stir linear welded aluminum to magnesium

H. M. Rao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of dynamic recrystallization phenomena in metallic materials

K. Huang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Engineering, Industrial

Friction stir welding process of dissimilar metals of 6061-T6 aluminum alloy to AZ31B magnesium alloy

Banglong Fu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminum and magnesium dissimilar alloys

Yong Zhao et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Tool Offset and Tool Rotational Speed on Enhancing Mechanical Property of Al/Mg Dissimilar FSW Joints

Zhiyuan Liang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of water cooling during dissimilar friction stir welding of Al alloy to Mg alloy

M. A. Mofid et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and Mechanical Properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al Alloy and AZ31 Mg Alloy

Woong-Seong Chang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation of Liquid and Intermetallics in Al-to-Mg Friction Stir Welding

Vahid Firouzdor et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Intermetallic Compound Layer on Tensile Strength of Dissimilar Friction-Stir Weld of a High Strength Mg Alloy and Al Alloy

Naotsugu Yamamoto et al.

MATERIALS TRANSACTIONS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dissimilar friction stir welding between magnesium and aluminum alloys

Y. J. Kwon et al.

MATERIALS LETTERS (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dissimilar friction stir welded joints between 2024-T3 aluminum alloy and AZ31 magnesium alloy

Saad Ahmed Khodir et al.

MATERIALS TRANSACTIONS (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys

YS Sato et al.

SCRIPTA MATERIALIA (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.