☆ 4.6 Article

Cost and Quality Optimization Taguchi Design with Grey Relational Analysis of Halloysite Nanotube Hybrid Composite: CNC Machine Manufacturing

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach

Suganeswaran Kandasamy et al.

Summary: Aluminium Alloy 7075 is crucial in aircraft manufacturing due to its specific strength characteristics. Research focuses on improving erosion resistance of wings and fuselage using Surface Hybrid Composites with dual reinforcements like Aluminium Oxide and silicon carbide. Optimization of erosion parameters through Taguchi technique and Analysis of Variance tests revealed improved performance in erosion resistance.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Mechanics

Effect of Halloysite Nanotubes on Matrix Microcracking in Carbon Fiber/Epoxy Composites

M. J. Churruca et al.

Summary: Matrix microcracking is the main cause for gas permeation in linerless pressure vessels and storage tanks. The addition of halloysite nanotubes (HNTs) at different concentrations enhances microcrack resistance, with a 50% increase in cracking onset stress and a 60% increase in microcrack density compared to neat epoxy at a 5% addition of HNTs. The use of a reactive diluent offsets the increase in viscosity caused by HNT incorporation.

MECHANICS OF COMPOSITE MATERIALS (2022)

添加到收藏夹

Review Engineering, Civil

Lightweight hybrid materials and structures for energy absorption: A state-of-the-art review and outlook

Guangyong Sun et al.

Summary: This article provides a critical review on the advances in hybrid materials and structures for crashworthiness and energy absorption performance. It discusses the hybridization of different materials to maximize their functional roles in lightweight structures. The evaluation and comparison of various hybridized materials in terms of crashworthiness and energy absorption are also discussed.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Multiple objective optimization design of hybrid composite structures considering multiple-scale uncertainties

Xiang Peng et al.

Summary: This paper presents a multi-objective uncertainty optimization design methodology for hybrid composite structures considering multiple-scale uncertainties. The methodology involves uncertainty propagation analysis, quantification of macro material uncertainties using a neural network model, and the development of a multiple objective robust optimization design function. An adaptive nondominated sorting genetic algorithm II (NSGA-II) method is proposed to optimize the stacking sequence and material patches simultaneously. Engineering examples demonstrate that the proposed methodology can improve vibration characteristics while maintaining low material cost.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Chemistry, Applied

Taguchi design-based synthesis and structural analysis of Cassia galactomannan hydroxypropyl derivative

Deepak Sharma et al.

Summary: Hydroxypropylation of Cassia gum derived from ruderal Cassia tora species was studied using Taguchi's L'16 orthogonal array design of experiments. The optimized reaction conditions resulted in maximum hydroxypropyl content of 8.43% and 7.71% as determined by chromic acid titration and 1H NMR spectroscopic analysis. COSY and HSQC correlation spectral analysis confirmed the chemical shift values of substituted hydroxypropyl groups and the presence of C 6 of the beta-D-1, 4-linkedManp unit.

CARBOHYDRATE POLYMERS (2022)

添加到收藏夹

Article Business

Relaxed Rank Order Centroid Weighting MCDM Method With Improved Grey Relational Analysis for Subcontractor Selection: Photothermal Power Station Construction

Moses Olabhele Esangbedo et al.

Summary: This article proposes a new hybrid method and improves a classical multicriteria decision-making method for subcontractor selection in an uncertain decision-making environment. The proposed method estimates the weights of criteria using a combination of subjective and objective weighting methods. Grey relational analysis is improved by introducing both positive and negative reference alternatives. The proposed methods are applied to select a subcontractor for the supply of heliostats for photothermal power station construction, and sensitivity analysis is conducted to verify the results.

IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Optimization and significance of fabrication parameters on the mechanical properties of 3D printed Chitosan/PLA scaffold

Johnson Kehinde Abifarin et al.

Summary: This study investigated the fabrication parameters of 3D printed chitosan/PLA scaffold and their effects on the mechanical responses. It was found that the wt% of chitosan, infill density, and annealing temperature all had an impact on the mechanical properties of the composite. By optimizing these parameters, a mechanically enhanced scaffold could be fabricated.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Multi-Objective Optimization of WEDM of Aluminum Hybrid Composites Using AHP and Genetic Algorithm

Amresh Kumar et al.

Summary: This study focuses on investigating the optimum machining parameters for aluminum-based hybrid metal matrix composites, utilizing analytical hierarchy process and genetic algorithm to determine the best machining conditions for customized properties.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Tool Coating and Cutting Parameters on Surface Roughness and Burr Formation during Micromilling of Inconel 718

Atif Muhammad et al.

Summary: This research analyzed the effects of cutting speed, feed rate, depth of cut, and tool coating on surface roughness and burr formation during micromachining of Inconel 718. The depth of cut was found to be the main factor affecting burr formation, while cutting velocity was the primary factor influencing surface roughness. Additionally, tool coating did not significantly impact surface roughness or burr formation.

METALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Drilling Parameters Analysis on In-Situ Al/B4C/Mica Hybrid Composite and an Integrated Optimization Approach Using Fuzzy Model and Non-Dominated Sorting Genetic Algorithm

Palanikumar Kayaroganam et al.

Summary: In-situ hybrid metal matrix composites were prepared by reinforcing AA6061 aluminum alloy with B4C and mica. The machinability of the hybrid composite was evaluated through drilling tests with different input parameters. Results showed that mica reinforcement was crucial in reducing thrust force and torque during drilling, and optimal drill parameters were determined to minimize energy consumption and production costs.

METALS (2021)

添加到收藏夹

Article Engineering, Chemical

Optimization of Compression Molding Process Parameters for NFPC Manufacturing Using Taguchi Design of Experiment and Moldflow Analysis

Vardaan Chauhan et al.

Summary: This study utilized Taguchi design of experiment and Autodesk Moldflow(R) simulation to find the optimal processing parameters for manufacturing natural fiber-polymer composite products. The results revealed that the optimum processing parameters were mold temperature 60°C, compression time 40 seconds, melt temperature 210°C, and pressure 600 kN. Melt temperature was identified as the most significant processing parameter.

PROCESSES (2021)

添加到收藏夹

Article Automation & Control Systems

Investigations on tool wear, surface roughness, cutting temperature, and chip formation in machining of Cu-B-CrC composites

Usame Ali Usca et al.

Summary: This study aims to investigate the machinability characteristics of Cu matrix reinforced by B and ceramic CrC powders during dry turning operation. The results indicate that the reinforcement ratio has the greatest impact on flank wear, surface roughness, and cutting temperatures, while cutting speed and feed rate have secondary effects on cutting temperatures and surface roughness. The deformation mechanism in the material changes with cutting initiation due to the significant impact of reinforcement ratio, suggesting a need for further exploration to measure the machinability behavior of metal matrix composites.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Automation & Control Systems

Taguchi grey relational analysis on the mechanical properties of natural hydroxyapatite: effect of sintering parameters

Johnson Kehinde Abifarin

Summary: Through Taguchi grey relational analysis design, this study optimized the hardness and compressive strength of HAp, finding that HA with better mechanical properties can be achieved by reducing or eliminating compaction pressure. Sintering temperature was identified as the most significant factor affecting the overall mechanical properties of the synthesized HA.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Review Polymer Science

Multifunctionality in Epoxy Resins

Jaworski C. Capricho et al.

POLYMER REVIEWS (2020)

添加到收藏夹

Article Mechanics

Concurrent multi-scale optimization of hybrid composite plates and shells for vibration

Xiangtao Ma et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Exploring Grey Systems Theory-Based Methods and Applications in Sustainability Studies: A Systematic Review Approach

Ehsan Javanmardi et al.

SUSTAINABILITY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Multi-objective optimal design of hybrid composite laminates under eccentric loading

Bertan Beylergil

ALEXANDRIA ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Forging optimisation process using numerical simulation and Taguchi method

Japeth Oirere Obiko et al.

SN APPLIED SCIENCES (2020)

添加到收藏夹

Article Mechanics

Multi-objective optimal design of hybrid composite laminates for minimum cost and maximum fundamental frequency and frequency gaps

Haichao An et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Taguchi Design of PZT-Based Piezoelectric Cantilever Beam with Maximum and Robust Voltage for Wide Frequency Range

Sanghyun Park et al.

JOURNAL OF ELECTRONIC MATERIALS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Grey Regulatory Focus Theory Weighting Method for the Multi-Criteria Decision-Making Problem in Evaluating University Reputation

Moses Olabhele Esangbedo et al.

SYMMETRY-BASEL (2019)

添加到收藏夹

Review Chemistry, Physical

Carbon materials and their composites for electromagnetic interference shielding effectiveness in X-band

Shivam Gupta et al.

CARBON (2019)

添加到收藏夹

Review Environmental Sciences

The nexus between air pollution, green infrastructure and human health

Prashant Kumar et al.

ENVIRONMENT INTERNATIONAL (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

Impact behaviour of hybrid composites for structural applications: A review

Syafiqah Nur Azrie Safri et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Physical

Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis

Md. Nahid Pervez et al.

MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Super Abrasive Machining of Integral Rotary Components Using Grinding Flank Tools

Haizea Gonzalez et al.

METALS (2018)

添加到收藏夹

Article Chemistry, Physical

Taguchi Grey Relational Analysis for Multi-Response Optimization of Wear in Co-Continuous Composite

Prasanth Achuthamenon Sylajakumari et al.

MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

A TOPSIS-Based Taguchi Design to Investigate Optimum Mixture Proportions of Graphene Oxide Powder Synthesized by Hummers Method

Haluk Korucu et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2018)

添加到收藏夹

Article Mechanics

Multi-objective robust optimization of multi-directional carbon/glass fibre-reinforced hybrid composites with manufacture related uncertainties under flexural loading

Mehdi Kalantari et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Manufacturing

Multi-response optimization of wire electrical discharge machining process parameters for Al7075/Al2O3/SiC hybrid composite using Taguchi-based grey relational analysis

Shyam Lal et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The Effect of Cutting Speed and Depth of Cut on Surface Roughness During Machining of Austempered Ductile Iron

Prashant Parhad et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites

K. Majeed et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Engineering, Manufacturing

Effect of Machining Parameters on Cutting Forces and Surface Roughness in Al-(1-2) Fe-1V-1Si Alloys

B. N. Pathak et al.

MATERIALS AND MANUFACTURING PROCESSES (2013)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An integrated evolutionary approach for modelling and optimisation of CNC end milling process

D. Kondayya et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2012)

添加到收藏夹

Article Materials Science, Composites

Microstructural, mechanical, and thermal characteristics of recycled cellulose fiber-halloysite-epoxy hybrid nanocomposites

H. Alamri et al.

POLYMER COMPOSITES (2012)

添加到收藏夹

Article Engineering, Manufacturing

Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics

CL Lin

MATERIALS AND MANUFACTURING PROCESSES (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.