☆ 4.6 Article

Mechanical Properties and Fracture Behavior of a TC4 Titanium Alloy Sheet

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Effect of the notch depth on fracture behavior of TC4 titanium alloy sheets

Yue Wang et al.

Summary: The effect of notch depth on the fracture behavior of 1.8 mm thick TC4 titanium alloy sheets was investigated using tensile tests and digital image correlation method. Ductile-brittle transition was observed as the notch depths increased. Ductile fracture occurred for notched samples with a notch depth of 0.5-1.5 mm, while brittle fracture occurred for notch depths of 3.0-5.0 mm. Samples with a notch depth of 2.0-2.5 mm exhibited a transition from ductile to brittle fracture. Fracture energy γf was found to characterize the ductile-brittle transition of notched TC4 titanium alloy sheets.

ENGINEERING FRACTURE MECHANICS (2023)

添加到收藏夹

Article Mechanics

Phase field formulation for the fracture of a metal under impact with a fluid formulation

Shourong Hao et al.

Summary: This work investigates the impact problems of metals under intense shock waves and proposes a new phase field model to account for different fracture modes. The model is validated by experimental results and parametric studies reveal the significant effect of key parameters on the fracture characteristics.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Mechanics

A simplified Johnson-Cook model of TC4T for aeroengine foreign object damage prediction

Hongbo Zhang et al.

Summary: In this study, the dynamic mechanical properties of a new titanium alloy TC4T were investigated and a constitutive model was established. The model was validated through numerical simulations and experimental results. Additionally, FOD tests were conducted using an air gun and compared with numerical predictions, showing good agreement. Finally, the proposed constitutive model was used to predict and evaluate FOD in an aeroengine fan blade, with results indicating that initial stress had minimal influence on FOD profiles while impact position had a significant effect.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Numerical prediction of sheared edge profiles in sheet metal trimming using ductile fracture modeling

Shamik Basak et al.

Summary: This study investigates sheared edges of three automotive sheet metals using experimental and numerical analyses. The Hosford-Coulomb ductile fracture model is calibrated and incorporated into finite element simulations to predict trimmed surface quality and burr formations. Results show differences in shear zone and burr height among TRIP steel, hot-stamped steel, and aluminum alloy 5182, with aluminum alloy being more sensitive to cutting clearance.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures

Ahmed Kacem et al.

Summary: Warm forming is an effective method for improving the formability of aluminum alloys at room temperature. This study focuses on investigating the influence of temperature and stress state on the ductile fracture of AA6061-T6 aluminum alloy sheet metal. Experimental tests and numerical simulations are conducted to determine the fracture strain and stress state parameters under different conditions. The results show that temperature and stress state have a strong impact on ductile fracture. A modified ductile fracture criterion that considers temperature effects is proposed and evaluated.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Civil

The effect of thickness on fracture characteristics of TC4 titanium alloy sheets

Yue Wang et al.

Summary: This study investigated the fracture characteristics of TC4 titanium alloy sheets with different thicknesses through single-edge crack tensile tests. It was found that a ductile-brittle transition behavior occurred in the thickness range of 0.6-1.8 mm. The size of the plastic zone and cracking parameters can be used to qualitatively evaluate the toughness and brittleness of the material.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Comparison of two-step surface treatment on surface roughness and corrosion resistance of TC4 alloy parts prepared by SLM and SEBM

Xin Yang et al.

Summary: This study employs a two-step surface treatment technology to improve the surface defects and quality of parts fabricated by selective laser melting (SLM) and selective electron beam melting (SEBM). The results show that the two-step surface treatment effectively reduces the step effect of the original samples and enhances the corrosion resistance through micro-arc oxidation (MAO) coating.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Research on the Corrosion Behavior of Q235 Pipeline Steel in an Atmospheric Environment through Experiment

Shuo Cai et al.

Summary: This study investigates the corrosion behavior and mechanism of Q235 low-carbon steel in an enhanced corrosion environment through cyclic salt spray accelerated corrosion tests. It establishes an evaluation model for quick assessment of the corrosion life of Q235 low-carbon steel. The findings provide important technical support for improving the life and reliability of low-carbon steel pipelines.

MATERIALS (2022)

添加到收藏夹

Article Automation & Control Systems

Formability and microstructure of TC4 titanium alloy hollow shafts formed by cross-wedge rolling with a mandrel

Pengni Feng et al.

Summary: This study investigates the formability and microstructure of TC4 titanium alloy hollow shafts formed by cross-wedge rolling (CWR) for lightweight products in the aviation sector. The effect of process parameters on the ellipticity of the TC4 alloy hollow shafts is significant, with factors such as forming angle, stretching angle, and area reduction playing crucial roles. Additionally, the deformation temperature, area reduction, and wall thickness of the workpiece also impact the microstructure of the TC4 alloy hollow shafts formed by CWR.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Image-based multiscale modeling with spatially varying microstructures from experiments: Demonstration with additively manufactured metal in fatigue and fracture

Orion L. Kafka et al.

Summary: This manuscript introduces a novel modeling framework for predicting mechanical performance in materials with spatially varying microstructure. The method allows for parametric studies exploring the dispersion of voids in additively manufactured metals, and demonstrates its ability to capture variability in part scale performance due to individual microstructures and their distribution. This approach shows promise for application in AM metals.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)

添加到收藏夹

Article Engineering, Mechanical

Investigation of tensile and compressive mechanical properties of typical aerospace alloy materials

Yuting Hu et al.

Summary: Mechanical properties and fracture microscopic morphologies of TC4 titanium alloy and 7075 aluminum alloy were compared through uniaxial tension and compression experiments, revealing the superior performance of TC4 titanium alloy under the same loading rates. In addition, infrared thermography technology was used to analyze the temperature variation characteristics of the specimens, providing a deeper insight into the thermal behavior of the alloys under differing loading conditions. Constitutive equations were derived to express the yield flow stress behavior, incorporating power-law hardening and tensile loading rate considerations.

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modified Johnson-Cook model of aluminum alloy 6016-T6 sheets at low dynamic strain rates

Zhe Jia et al.

Summary: The study investigated the flow properties of an aluminum alloy under different strain rates and developed a modified Johnson-Cook model to accurately predict its behavior with a prediction error of only 0.0415%.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Optimization of Milling Aluminum Alloy 6061-T6 using Modified Johnson-Cook Model

Suyang Li et al.

Summary: Finite element simulation is an efficient method to optimize the high-speed machining process of aluminum alloy, with a temperature-dependent Johnson-Cook constitutive model being proposed for accurate prediction. The study successfully established a two-dimensional FE model to analyze cutting forces and chip morphology, providing theoretical guidance for the optimization of cutting processes.

SIMULATION MODELLING PRACTICE AND THEORY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hot tensile deformation behavior and microstructural evolution of 2195 Al-Li alloy

Jian Ning et al.

Summary: Research on the hot tensile deformation behavior of 2195 Al-Li alloy in the temperature range of 440-500 degrees C revealed that the degree of dynamic recrystallization increases with the strain, and the pinning effect of precipitations is more sensitive to temperature. When the temperature reaches 500 degrees C, the weakening of the pinning effect of precipitations makes it easier to activate more dynamic recrystallization.

VACUUM (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of Lode angle incorporation into a fracture criterion in predicting the ballistic resistance of 2024-T351 aluminum alloy plates struck by cylindrical projectiles with different nose shapes

Yaopei Wang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive equation and hot processing map of TA15 titanium alloy

Hongchao Ji et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Nuclear Science & Technology

Dynamic constitutive relationship of CuCrZr alloy based on Johnson-Cook model

Xinyuan Qian et al.

NUCLEAR MATERIALS AND ENERGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Forming Limit Prediction of Anisotropic Aluminum Magnesium Alloy Sheet AA5052-H32 Using Micromechanical Damage Model

Hao H. Nguyen et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Constitutive Modeling of 2024 Aluminum Alloy Based on the Johnson-Cook Model

S. Rasaee et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the Development of Material Constitutive Model for 45CrNiMoVA Ultra-High-Strength Steel

Xin Hu et al.

METALS (2019)

添加到收藏夹

Article Engineering, Mechanical

Ballistic performance and energy absorption characteristics of thin nickel based alloy plates at elevated temperatures

Liu Jiao et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hot workability, constitutive model and processing map of 3Cr23Ni8Mn3N heat resistant steel

Zhongman Cai et al.

VACUUM (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive modelling and microscopic analysis of TC4 alloy sheet at elevated temperature

Hui Wang et al.

RESULTS IN PHYSICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis and constitutive modeling of high strain rate deformation behavior of Haynes 282 aerospace superalloy

Nnaemeka Emmanuel Ugodilinwa et al.

MATERIALS TODAY COMMUNICATIONS (2019)

添加到收藏夹

Article Engineering, Mechanical

Impact resistance prediction of superalloy honeycomb using modified Johnson-Cook constitutive model and fracture criterion

Wang Jianjun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A constitutive model for Ti6Al4V considering the state of stress and strain rate effects

Wenyu Cheng et al.

MECHANICS OF MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive modelling of Al7075 using the Johnson-Cook model

Sajad Rasaee et al.

BULLETIN OF MATERIALS SCIENCE (2019)

添加到收藏夹

Article Engineering, Manufacturing

Machinability of titanium alloy through electric discharge machining

Naveed Ahmed et al.

MATERIALS AND MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Chemistry, Physical

Hot Deformation Characteristics-Constitutive Equation and Processing Maps-of 21-4N Heat-Resistant Steel

Yiming Li et al.

MATERIALS (2019)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Ductile fracture in tube impact problem using a Lode angle dependent failure criterion

Dipankar Bora et al.

2ND INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND EXHIBITION 2018 (SICE 2018) (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characteristics of Ti6Al4V Powders Recycled from Turnings via the HDH Technique

Mertol Gokelma et al.

METALS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Modeling and simulation of the high-speed milling of hardened steel SKD11 (62HRC) based on SHPB technology

Chengyong Wang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Engineering, Manufacturing

Ductile fracture and free surface roughening behaviors of pure copper foils for micro/meso-scale forming

Tsuyoshi Furushima et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)

添加到收藏夹

Article Engineering, Mechanical

Validation of Johnson-Cook plasticity and damage model using impact experiment

Xuemei Wang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modelling of dominant softening mechanisms for Ti-6Al-4V in steady state hot forming conditions

Q. Bai et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Physics, Applied

Determination of parameters of Steinberg-Guinan constitutive model with shock wave experiments

Jianxang Peng et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.