☆ 4.6 Article

Effects of Solvent Additive and Micro-Patterned Substrate on the Properties of Thin Films Based on P3HT:PC70BM Blends Deposited by MAPLE

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Nanoimprint Lithography-Dependent Vertical Composition Gradient in Pseudo-Planar Heterojunction Organic Solar Cells Combined with Sequential Deposition

Houdong Mao et al.

Summary: In this study, nanoimprint lithography (NIL) combined with donor/acceptor sequential deposition (SD) dual-functionalized regulation strategy was used to fabricate high-performance pseudo-planar heterojunction (PPHJ) organic solar cells (OSCs). The PM6 donor with regular periodic nanograting structure and improved crystallinity was obtained via NIL, effectively avoiding erosion problems caused by subsequent deposition of the Y6 acceptor. Finite-different time-domain (FDTD) measurement confirmed the vertical composition gradient of the donor/acceptor and showed strong regular light absorption and reduced voltage loss. The best-imprinted device achieved a power conversion efficiency of 17.36%, higher than the control SD-based device (15.46%).

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Inverted perovskite/silicon V-shaped tandem solar cells with 27.6% efficiency via self-assembled monolayer-modified nickel oxide layer

Likai Zheng et al.

Summary: A novel inverted perovskite/silicon V-shaped tandem solar cell was proposed in this work, achieving efficient photon utilization and optimized energy allocation through an elaborate design. The tandem cell demonstrated a high power-conversion efficiency of 27.6%, offering promising potential for reducing carbon emissions in the silicon cell industrial chain.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-efficiency organic photovoltaic cells processed using a non-halogen solvent

Yang-Yen Yu et al.

Summary: This paper describes high-performance PM6:BTP-eC9-based organic photovoltaic (OPV) cells prepared using non-halogen solvents. Three green solvents were investigated as replacements for chloroform. The optoelectronic properties of the blend films and their respective devices were optimized and analyzed. The OPV cell prepared with toluene as the solvent and 1,8-diiodooctane (DIO) as the additive showed the best performance.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fully solution-processed, light-weight, and ultraflexible organic solar cells

Ezgi Nur Guler et al.

Summary: This study demonstrates the fabrication of fully solution-processed, semitransparent organic solar cells directly onto barrier films. The novel OSCs not only exhibit better flexibility and higher specific power, but also show comparable stability to conventionally encapsulated devices. The research reveals the importance of barrier properties, UV light soaking, and potential damage during processing in the degradation of OPV devices.

FLEXIBLE AND PRINTED ELECTRONICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Achieving Record-Efficiency Organic Solar Cells upon Tuning the Conformation of Solid Additives

Congqi Li et al.

Summary: Volatile solid additives (SADs) are a simple and effective method to adjust the film morphology of high-performance organic solar cells (OSCs). This study designed and synthesized two volatilizable SADs, and the results revealed that the planar SAD2 can more easily insert between Y6 molecules, leading to a tighter molecular packing mode and improved photovoltaic performance.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thin Films Characterization and Study of N749-Black Dye for Photovoltaic Applications

Muhammad Tahir et al.

Summary: This paper reports on the fabrication and photovoltaic characteristics of a heterojunction solar cell based on an organic small molecule semiconductor, N749-BD. The study shows that N749-BD has the potential to be utilized in low-cost, simple manufacturing process, and high-performance solar cells.

COATINGS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improving the Efficiency of Organic Solar Cells by Introducing Perylene Diimide Derivative as Third Component and Individually Dissolving Donor/Acceptor

Hao Lu et al.

Summary: By utilizing a PDI derivative as the third component, high-efficiency ternary organic solar cells were prepared with improved device efficiency and short-circuit current density, while still maintaining a high open-circuit voltage.

CHEMSUSCHEM (2021)

添加到收藏夹

Article Energy & Fuels

Solar cell efficiency tables (version 57)

Martin Green et al.

Summary: This article presents consolidated tables showing the highest independently confirmed efficiencies for solar cells and modules, including guidelines for inclusion of results and reviewing new entries since June 2020. It also includes charts showing efficiency improvements since 1993 and an updated list of recognized test centers.

PROGRESS IN PHOTOVOLTAICS (2021)

添加到收藏夹

Article Energy & Fuels

Inverted PTB7-Th:PC71BM organic solar cells with 11.8% PCE via incorporation of gold nanoparticles in ZnO electron transport layer

Belal Usmani et al.

Summary: The incorporation of gold nanoparticles into zinc oxide electron transport layers in organic solar cells can enhance light absorption and improve carrier collection efficiency, ultimately leading to significantly improved device performance.

SOLAR ENERGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recently-explored top electrode materials for transparent organic solar cells

Jing-Jing Shen

Summary: Transparent photovoltaics on building surfaces, such as windows and siding, have the potential to revolutionize renewable energy generation. Organic solar cells offer advantages including high absorption coefficients, flexibility, lightweight, and low cost, but require compatible active materials and suitable top conductive electrodes. Research on transparent organic solar cells has shown that materials like transparent conductive oxides, carbon-based conductive polymers, and metallic nanowires can provide high efficiency photovoltaics, promising a more sustainable energy future.

SYNTHETIC METALS (2021)

添加到收藏夹

Article Thermodynamics

Solar power windows: Connecting scientific advances to market signals

David R. Needell et al.

Summary: Recent material advancements have allowed researchers to develop highly efficient, partially transparent photovoltaic prototypes, uncovering a potentially untapped market for solar energy; Assessing the customer needs in the market for commercial high-rise building windows reveals a complex interplay of market forces affected by incentive misalignments, necessitating the development of new key figures of merit for BIPV windows.

ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-efficiency organic solar cells enabled by an alcohol-washable solid additive

Yuanpeng Xie et al.

Summary: The introduction of a solid additive, 1,4-diiodobenzene (DIB), in organic solar cells (OSC) fabrication results in optimized morphology, forming a bicontinuous network with intensified intermolecular packing in the donor and acceptor phases. DIB can be easily removed from the active layer via a simple alcohol washing process, eliminating the need for further post-thermal annealing, thus showing promising applications for large-scale manufacturing of OSCs. OSCs fabricated with DIB achieved high efficiencies and superior stability compared to traditional processed devices, demonstrating a feasible approach to enhance both efficiency and stability in OSCs.

SCIENCE CHINA-CHEMISTRY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Organic Thin Films Deposited by Matrix-Assisted Pulsed Laser Evaporation (MAPLE) for Photovoltaic Cell Applications: A Review

Marcela Socol et al.

Summary: Solar power is a sustainable solution that can provide cheap and clean energy, contributing positively to climate change. Organic photovoltaic cells have shown great potential, but challenges lie in selecting the right organic compounds and manufacturing techniques to improve their performance. Advanced laser deposition techniques, such as MAPLE, offer promising developments for enhancing the efficiency of OPV cells in the future.

COATINGS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Nucleobases thin films deposited on nanostructured transparent conductive electrodes for optoelectronic applications

C. Breazu et al.

Summary: The use of 2D nanostructured transparent conductive electrode can influence the morphological, structural, optical and electrical properties of nucleobases thin films, affecting both optical (transmission and emission) properties and electrical properties through modifications at the organic/electrode interface. These results suggest potential applications in green optoelectronic devices.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

UV Nanoimprint Lithography: Geometrical Impact on Filling Properties of Nanoscale Patterns

Christine Thanner et al.

Summary: The UV Nanoimprint Lithography is efficient in producing resist layers with features ranging from micrometers to nanometers. Understanding material properties, pattern size, and shape is crucial for optimizing processes for reliable manufacturing. Comparing results for different pattern geometries can provide a helpful overview of relevant process parameters.

NANOMATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

High-performance and eco-friendly semitransparent organic solar cells for greenhouse applications

Di Wang et al.

Summary: This study developed high-performance spectrally engineered semitransparent organic solar cells using green fabrication methods for greenhouse applications. Empowered by the newly designed quaternary blends, the solar cells achieved excellent power conversion efficiency and maintained good photovoltaic properties during fabrication with non-halogenated solvents to meet the needs of plant photon absorption.

JOULE (2021)

添加到收藏夹

Article Energy & Fuels

Comparative Investigation of Fullerene PC71BM and Non-fullerene ITIC-Th Acceptors Blended With P3HT or PBDB-T Donor Polymers for PV Applications

Francis Otieno et al.

Summary: Organic solar cells (OSCs) utilize absorption of light to generate excitons which dissociate into free charge carriers, recent advancements in device performance have been driven by the development of novel donor and acceptor materials as well as device engineering. The differences between fullerene and non-fullerene materials in OSCs lie in their absorption characteristics and stability, with non-fullerene OSCs having tunable absorption spectrum and improved stability.

FRONTIERS IN ENERGY RESEARCH (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organic Solar Cells with 18% Efficiency Enabled by an Alloy Acceptor: A Two-in-One Strategy

Feng Liu et al.

Summary: A high-performance ternary solar cell utilizing a large-bandgap polymer donor and two structurally similar small-bandgap alloy acceptors is reported, achieving a power conversion efficiency of over 18%. By delicately regulating the energy levels of the alloy acceptor through varying the ratio of the two acceptors, more efficient hole transfer and exciton separation are achieved, contributing to reduced energy loss and better overall performance compared to single acceptor systems. Such a two-in-one alloy strategy shows promise in boosting the photovoltaic performance of devices.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Optimization of Sb2S3 Nanocrystal Concentrations in P3HT: PCBM Layers to Improve the Performance of Polymer Solar Cells

E. M. Mkawi et al.

Summary: In this study, polymer solar cells were synthesized by incorporating Sb2S3 nanocrystals in the active layer and the dependence of device performance on nanocrystal concentration was investigated. The results showed that introducing Sb2S3 nanocrystals improved light absorption, regulated energy levels, and enhanced electronic parameters by offering additional excited electron pathways through the nanocrystals. These findings demonstrate the potential of Sb2S3 nanocrystals for improving the efficiency of organic photovoltaic devices.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Slot-Die Coating of All Organic/Polymer Layers for Large-Area Flexible OLEDs: Improved Device Performance with Interlayer Modification

C. Amruth et al.

Summary: The slot-die coating technique has emerged as a viable method for manufacturing flexible OLED devices. By optimizing the process parameters, high performance and cost reduction can be achieved for OLED devices.

ADVANCED MATERIALS TECHNOLOGIES (2021)

添加到收藏夹

Proceedings Paper Engineering, Electrical & Electronic

Wafer-level fabrication of nanocones structures by UV-nanoimprint and cryogenic deep reactive ion process

Oana Rasoga et al.

Summary: The study focuses on fabricating silicon nano-cones (pyramids) using UV-nanoimprint lithography with polymeric stamps and deep reactive ion etching at cryogenic temperatures. Results demonstrate that the resist can effectively act as an etching mask for cryogenic silicon etching.

2021 INTERNATIONAL SEMICONDUCTOR CONFERENCE (CAS) (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improvement of organic solar cell performance by multiple plasmonic excitations using mixed-silver nanoprisms

Apichat Phengdaam et al.

Summary: The study combined three different silver nanoprisms as light-trapping materials in organic solar cells to increase photocarrier generation through multiple plasmonic excitations. Under optimal conditions, the efficiency of the organic solar cells loaded with mixed silver nanoprisms was 7.9% higher than the reference.

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Improved performance of small molecule organic solar cells by incorporation of a glancing angle deposited donor layer

Qi Jiang et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Energy & Fuels

Shining Light on Organic Solar Cells

Alexander Colsmann et al.

SOLAR RRL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Blade -coated efficient and stable large -area organic solar cells with optimized additive

Lin Zhang et al.

ORGANIC ELECTRONICS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Optimized active layer morphology toward efficient and polymer batch insensitive organic solar cells

Kangkang Weng et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

16.8% Monolithic all-perovskite triple-junction solar cells via a universal two-step solution process

Junke Wang et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

MAPLE Deposition of Binary and Ternary Organic Bulk Heterojunctions Based on Zinc Phthalocyanine

Marcela Socol et al.

COATINGS (2020)

添加到收藏夹

Article Energy & Fuels

Thickness Optimization and Photovoltaic Properties of Bulk Heterojunction Solar Cells Based on PFB-PCBM Layer

Sayed Izaz Uddin et al.

ENERGIES (2020)

添加到收藏夹

Article Chemistry, Physical

On the physical and photo-electrical properties of organic photovoltaic cells based on 1,10-Phenanthroline and 5,10,15,20-Tetra(4-pyridyl)-21H,23H-porphine non-fullerene thin films

Irina Radu (Calugar) Alina et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Optics

P3HT:PC61 BM solar cell embedding silver nanostripes for light absorption enhancement

Tomohisa Isegawa et al.

OPTICS COMMUNICATIONS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Residual solvent additive enables the nanostructuring of PTB7-Th:PC71BM solar cells via soft lithography

Chao Wang et al.

AIP ADVANCES (2019)

添加到收藏夹

Article Chemistry, Physical

Pyridine-based additive optimized P3HT:PC61BM nanomorphology for improved performance and stability in polymer solar cells

Binrui Xu et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Solvent Additives on the Morphology and Device Performance of Printed Nonfullerene Acceptor Based Organic Solar Cells

Kerstin S. Wienhold et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative study of absorption and photoluminescent properties of organic solar cells based on P3HT:PCBM and P3HT:ITIC blends

Erkin Zakhidov et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Life cycle assessment of organic photovoltaic charger use in Europe: the role of product use intensity and irradiation

Edis Glogic et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Electrochemistry

Combined parametric optimization of P3HT: PC70BM films for efficient bulk-heterojunction solar cells

Hafsa Siddiqui et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Enhancing the photovoltaic performance of hybrid heterojunction solar cells by passivation of silicon surface via a simple 1-min annealing process

Rongbin Xie et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Chemistry, Physical

Spectral Engineering of Semitransparent Polymer Solar Cells for Greenhouse Applications

Hui Shi et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pulsed Laser Deposition of Indium Tin Oxide Thin Films on Nanopatterned Glass Substrates

Marcela Socol et al.

COATINGS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergetic Transparent Electrode Architecture for Efficient Non-Fullerene Flexible Organic Solar Cells with >12% Efficiency

Yue-Xing Zhang et al.

ACS NANO (2019)

添加到收藏夹

Article Spectroscopy

Infrared and multi-wavelength Raman spectroscopy of regio-regular P3HT and its deutero derivatives

L. Brambilla et al.

JOURNAL OF RAMAN SPECTROSCOPY (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Solvent Additives: Key Morphology-Directing Agents for Solution-Processed Organic Solar Cells

Caitlin McDowell et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

A photovoltaic window with sun-tracking shading elements towards maximum power generation and non-glare daylighting

Yuan Gao et al.

APPLIED ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of Active Layer Thickness on the Performance of Polymer Solar Cells Based on a Highly Efficient Donor Material of PTB7-Th

Yue Zang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Polymer solar cells: P3HT: PCBM and beyond

P. R. Berger et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Photo-degradation in air of spin-coated PC60BM and PC70BM films

Vanja Blazinic et al.

SYNTHETIC METALS (2018)

添加到收藏夹

Article Chemistry, Physical

Heat-Insulating Multifunctional Semitransparent Polymer Solar Cells

Chen Sun et al.

JOULE (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of Processing Additives on Organic Photovoltaics: Recent Progress and Future Prospects

Sooncheol Kwon et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

High Energy Conversion Efficiency with 3-D Micro-Patterned Photoanode for Enhancement Diffusivity and Modification of Photon Distribution in Dye-Sensitized Solar Cells

Min Ju Yun et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Enhanced thermal stability of organic solar cells comprising ternary D-D-A bulk-heterojunctions

Dominik Landerer et al.

NPJ FLEXIBLE ELECTRONICS (2017)

添加到收藏夹

Article Chemistry, Physical

Organic heterostructures deposited by MAPLE on AZO substrate

M. Socol et al.

APPLIED SURFACE SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solar Trees: First Large-Scale Demonstration of Fully Solution Coated, Semitransparent, Flexible Organic Photovoltaic Modules

Stephane Berny et al.

ADVANCED SCIENCE (2016)

添加到收藏夹

Article Chemistry, Applied

Design of diketopyrrolopyrrole chromophores applicable as sensitizers in dye-sensitized photovoltaic windows for green houses

Naresh Duvva et al.

DYES AND PIGMENTS (2016)

添加到收藏夹

Article Chemistry, Physical

Fabrication and Optimization of Polymer Solar Cells Based on P3HT:PC70BM System

Huangzhong Yu et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2016)

添加到收藏夹

Article Multidisciplinary Sciences

High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor

Sarah Holliday et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Article Chemistry, Physical

Air-Stable Organic Solar Cells Using an Iodine-Free Solvent Additive

Seongyu Lee et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Energy & Fuels

Efficient organic solar cells processed from hydrocarbon solvents

Jingbo Zhao et al.

NATURE ENERGY (2016)

添加到收藏夹

Proceedings Paper Chemistry, Applied

Fabrication of organic solar cells with design blend P3HT: PCBM variation of mass ratio

Agus Supriyanto et al.

10TH JOINT CONFERENCE ON CHEMISTRY (2016)

添加到收藏夹

Article Physics, Multidisciplinary

Nano structure evolution in P3HT:PC61BM blend films due to the effects of thermal annealing or by adding solvent

Fan Xing et al.

CHINESE PHYSICS B (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Organic photovoltaic devices with enhanced efficiency processed from non-halogenated binary solvent blends

J. Griffin et al.

ORGANIC ELECTRONICS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced photovoltaics inspired by the fovea centralis

Gil Shalev et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-phase microstructures drive exciton dissociation in neat semicrystalline polymeric semiconductors

Francis Paquin et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

添加到收藏夹

Article Physics, Applied

Optimizing Ga-profiles for highly efficient Cu(In, Ga)Se2 thin film solar cells in simple and complex defect models

C. Frisk et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)

添加到收藏夹

Article Polymer Science

Regio-Regular Oligo and Poly(3-hexyl thiophene): Precise Structural Markers from the Vibrational Spectra of Oligomer Single Crystals.

Luigi Brambilla et al.

MACROMOLECULES (2014)

添加到收藏夹

Article Physics, Applied

Effects of nano-patterned versus simple flat active layers in upright organic photovoltaic devices

Yingchi Liu et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electronic structure and surface morphology of [6,6]-phenyl-C71-butyric acid methyl ester films

Ayumi Nogimura et al.

ORGANIC ELECTRONICS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancement of organic solar cell efficiency by patterning the PEDOT: PSS hole transport layer using nanoimprint lithography

Je-Hong Choi et al.

ORGANIC ELECTRONICS (2013)

添加到收藏夹

Article Energy & Fuels

Cu(In,Ga)Se2 solar cells and mini-modules fabricated on thin soda-lime glass substrates

Shigenori Furue et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)

添加到收藏夹

Article Chemistry, Physical

Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells

Brian A. Collins et al.

ADVANCED ENERGY MATERIALS (2013)

添加到收藏夹

Article Chemistry, Physical

Fabricating High Performance, DonorAcceptor Copolymer Solar Cells by Spray-Coating in Air

Tao Wang et al.

ADVANCED ENERGY MATERIALS (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Concrete Embedded Dye-Synthesized Photovoltaic Solar Cell

T. Hosseini et al.

SCIENTIFIC REPORTS (2013)

添加到收藏夹

Article Chemistry, Physical

Enhancing the efficiency of low bandgap conducting polymer bulk heterojunction solar cells using P3HT as a morphology control agent

Sheng-Yung Chang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

添加到收藏夹

Article Physics, Applied

Poly-(3-hexylthiophene)/[6,6]-phenyl-C61-butyric-acid-methyl-ester bilayer deposition by matrix-assisted pulsed laser evaporation for organic photovoltaic applications

A. P. Caricato et al.

APPLIED PHYSICS LETTERS (2012)

添加到收藏夹

Article Energy & Fuels

Influence of PC60BM or PC70BM as electron acceptor on the performance of polymer solar cells

Fujun Zhang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)

添加到收藏夹

Article Chemistry, Physical

Multi-Length-Scale Morphologies in PCPDTBT/PCBM Bulk-Heterojunction Solar Cells

Yu Gu et al.

ADVANCED ENERGY MATERIALS (2012)

添加到收藏夹

Proceedings Paper Energy & Fuels

Improvement of the efficiency of organic solar cells using the terthiophene-pyran-malononitrile (T3PM) as electron donor, through the use of a MoO3/CuI anode buffer layer

J. C. Bernede et al.

PROCEEDINGS OF THE SPRING 2011 E-MRS MEETING, SYMPOSIUM S: ORGANIC PHOTOVOLTAICS: SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Formation of Well-Ordered Heterojunctions in Polymer: PCBM Photovoltaic Devices

Ximin He et al.

ADVANCED FUNCTIONAL MATERIALS (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Flexible dye-sensitized solar cell based on PCBM/P3HT heterojunction

Yue GenTian et al.

CHINESE SCIENCE BULLETIN (2011)

添加到收藏夹

Article Chemistry, Physical

Fullerene derivative acceptors for high performance polymer solar cells

Youjun He et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organic Solar Cells Using Nanoimprinted Transparent Metal Electrodes

Myung-Gyu Kang et al.

ADVANCED MATERIALS (2008)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient tandem polymer solar cells fabricated by all-solution processing

Jin Young Kim et al.

SCIENCE (2007)

添加到收藏夹

Article Chemistry, Physical

Absorption spectra modification in poly(3-hexylthiophene): methanofullerene blend thin films

V Shrotriya et al.

CHEMICAL PHYSICS LETTERS (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.