☆ 4.6 Article

Hardness Distribution of Al2050 Parts Fabricated Using Additive Friction Stir Deposition

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Friction stir-based additive manufacturing

Rajiv S. Mishra et al.

Summary: Additive manufacturing has revolutionized component manufacturing and qualification by providing opportunities for topological optimization. Friction stir additive manufacturing and additive friction stir deposition utilize intense shear deformation to create microstructures that exhibit improved mechanical properties compared to conventionally processed alloys. Optimal mechanical properties can be achieved through alloy design, although further research is needed to apply these processes to high-temperature materials.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2022)

添加到收藏夹

Article Chemistry, Physical

Microstructure Evolution of Al6061 Alloy Made by Additive Friction Stir Deposition

Congyuan Zeng et al.

Summary: The study found that Al6061 alloy samples made with AFS-D exhibited a symmetrical layer-by-layer structure, uneven grain morphology distribution, and lower hardness compared to the feedstock.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A pseudo thermo-mechanical model linking process parameters to microstructural evolution in multilayer additive friction stir deposition of magnesium alloy

Shashank Sharma et al.

Summary: Additive friction stir deposition is a disruptive manufacturing process that allows for the deposition of multilayer materials. In this study, a finite element method-based pseudo-mechanical thermal model was developed to investigate the thermo-mechanical mechanisms and their impact on microstructural evolution. The computational predictions were in good agreement with the experimental observations, showing consistent temperature-time profiles and grain size changes.

MATERIALS & DESIGN (2022)

添加到收藏夹

Review Engineering, Aerospace

A Review on Solid-State-Based Additive Friction Stir Deposition

Hongrui Dong et al.

Summary: This paper reviews the application of solid-state-based additive friction stir deposition (AFSD) technology in additive manufacturing, including equipment, mechanism, the effect of process parameters on characteristics, and engineering applications. Furthermore, future research directions for the AFSD process are proposed.

AEROSPACE (2022)

添加到收藏夹

Article Engineering, Mechanical

Characterization of the fatigue behavior of additive friction stir-deposition AA2219

K. Anderson-Wedge et al.

Summary: This study characterizes the aluminum alloy AA2219 created by the solid-state additive friction stir-deposition process, determining the suitability of the as-deposited material for specific circumstances. It provides ideal process parameters for AFS-D AA2219 and characterizes the local optimal as-deposited material, laying the foundation for the technology to be used in construction of NASA's Space Launch System vehicle.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive friction stir deposition: a deformation processing route to metal additive manufacturing

Hang Z. Yu et al.

Summary: Additive friction stir deposition, as a counterpart to fusion-based additive processes, offers a solid-state deformation processing route for metal additive manufacturing. Its key advantages include producing fully-dense material in the printed state with fine, equiaxed microstructures, making it suitable for industries requiring high load-bearing capacity with minimal post-processing.

MATERIALS RESEARCH LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A meshfree computational framework for the numerical simulation of the solid -state additive manufacturing process, additive friction stir-deposition (AFS- D)

G. G. Stubblefield et al.

Summary: In this work, a fully coupled thermo-mechanical meshfree approach is developed for simulating the solid-state layer-by-layer additive manufacturing process AFS-D. The method uses a Lagrangian reference frame and solid mechanics formulation to resolve elastic and plastic strains. The simulation results are compared against experimental results for calibration, revealing temperature and strain rate gradients in the AFS-D process.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elucidating the Effect of Additive Friction Stir Deposition on the Resulting Microstructure and Mechanical Properties of Magnesium Alloy WE43

M. B. Williams et al.

Summary: The effect of processing parameters on WE43 magnesium alloy processed via Additive Friction Stir Deposition (AFSD) was investigated. A parameterization study identified suitable parameters for bulk WE43 deposition, resulting in a refined homogenous microstructure and specific changes in mechanical properties compared to wrought material. Fatigue life in the low-cycle regime was decreased in as-deposited WE43, but comparable to wrought material in the high-cycle regime, demonstrating the potential of AFSD process for additively manufactured load-bearing components with WE43 magnesium alloy.

METALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Long-term thermal ageing of the 2219-T851 and the 2050-T84 Al-Cu alloys

Nicolas Bello et al.

Summary: The study investigates the influence of high temperature exposure on mechanical properties and microstructures of two Al-Cu alloys. The results show that the 2219-T851 alloy is a better candidate for long-term structural applications at intermediate temperatures compared to the 2050-T84 alloy.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of microstructure on tensile properties of AA2050-T84 Al-Li alloy

Ding-ding Lu et al.

Summary: The microstructure evolution of 2050 Al-Li alloy thick plate significantly affects its tensile properties, with secondary phases, precipitates, and textures varying depending on thickness location. Precipitation strengthening has a stronger influence along the rolling direction than the transverse direction, while the M-value has limited changes at different thickness layers.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Thermomechanical Processing on Fatigue Behavior in Solid-State Additive Manufacturing of Al-Mg-Si Alloy

Ben A. Rutherford et al.

METALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Direct recycling of machine chips through a novel solid-state additive manufacturing process

J. B. Jordon et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure Development in Additive Friction Stir-Deposited Cu

Jonathan L. Priedeman et al.

METALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A Perspective on Solid-State Additive Manufacturing of Aluminum Matrix Composites Using MELD

R. Joey Griffiths et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Additive Friction Stir-Enabled Solid-State Additive Manufacturing for the Repair of 7075 Aluminum Alloy

R. Joey Griffiths et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of texture and grain refinement on the mechanical behavior of AA2219 fabricated by high shear solid state material deposition

O. G. Rivera et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Non-beam-based metal additive manufacturing enabled by additive friction stir deposition

Hang Z. Yu et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fatigue Behavior of Solid-State Additive Manufactured Inconel 625

D. Z. Avery et al.

JOM (2018)

添加到收藏夹

Article Chemistry, Physical

Impact of thermal management on post weld heat treatment efficacy in friction stir welded 2050-T3 alloy

Harpreet Sidhar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing

O. G. Rivera et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of a pre or postweld heat treatment on microstructure and mechanical properties of an AA2050 weld obtained by SSFSW

M. -N. Avettand-Fenoel et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical behavior of periodical microstructure induced by friction stir welding on Al-Cu-Li 2050 alloy

Matthieu Dhondt et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Evolution of Al-Li Base Products for Aerospace and Space Applications

Roberto J. Rioja et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aluminum-Copper-Lithium Alloy 2050 Developed for Medium to Thick Plate

Ph Lequeu et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.