☆ 4.6 Article

Tailoring of Dissimilar Friction Stir Lap Welding of Aluminum and Titanium

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Dissimilar friction stir welding of Al to non-Al metallic materials: An overview

Sachindra Shankar et al.

Summary: This paper presents a comprehensive review of dissimilar friction stir welding (FSW) between aluminum (Al) and non-aluminum metallic materials, covering combinations such as Al-Mg, Al-Cu, Al-steel, and Al-Ti. The study concludes that FSW is an effective solution for welding dissimilar materials of Al to non-Al metals, managing challenges like the formation of intermetallic compounds, defects, and mechanical property degradation at the joint area compared to conventional dissimilar welding methods.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution

A. Heidarzadeh et al.

Summary: Friction stir welding and friction stir processing offer unique characteristics to control microstructures and improve welding and surface performance. Research focuses on developing a comprehensive understanding of microstructural evolution, with a particular emphasis on mechanisms such as grain structure and phase transformations. Special attention is given to controlling and dispersing intermetallic compounds when joining different metals and alloys.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Automation & Control Systems

Influences of ultrasonic on friction stir welding of Al/Ti dissimilar alloys under different welding conditions

Zhongwei Ma et al.

Summary: The study found that ultrasonic can improve joint strength under appropriate welding conditions, but may cause defects when there is a large pin offset. The research provides a reference for the rational application of UAFSW technique.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of the microstructure, mechanical properties and fracture mechanisms of dissimilar friction stir welded aluminium/titanium joints

Taher A. Shehabeldeen et al.

Summary: The tool rotational speed significantly influences the strength and hardness of the welded joint, with lower speed resulting in higher shear strength and hardness, as well as producing a hybrid fracture surface; while higher rotational speeds tend to lead to brittle fracture mechanisms.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of ultrasonic on friction stir Al-Ti welds: a comparative study

Mingrun Yu et al.

Summary: UaFSW welding produced smaller waves and larger flashes compared to conventional FSW, with an expanded stir zone and double the strength in lap shear tests. Ultrasonic assistance eliminated interfacial micro-cracks and formed a mixed zone containing Ti fragment and intermetallic precipitates.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new method to elucidate fracture mechanism and microstructure evolution in titanium during dissimilar friction stir welding of aluminum and titanium

Amlan Kar et al.

Summary: The friction stir welding of dissimilar materials results in composite weld nuggets containing hard particles dispersed in a soft matrix. The deformation and fragmentation of high-strength material like titanium in the weld nugget can affect the properties of the weld. Understanding the complex behavior of titanium during this welding process can help in engineering composites with desired mechanical properties.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

The experimental study of CFRP interlayer of dissimilar joint AA7075-T651/Ti-6Al-4V alloys by friction stir spot welding on mechanical and microstructural properties

Tauqir Nasir et al.

Summary: This study investigated the welding of AA7075-T651 and Ti-6Al-4V alloys with additional carbon fiber-reinforced polymer using friction stir spot welding. The results showed the significant effects of welding parameters and the presence of Ti3Al and Ti-Al-C intermetallic compounds on the mechanical and microstructural properties of the weld joint. The study also found that dwell time plays an important role in determining the tensile shear load of the weld joint.

NANOTECHNOLOGY REVIEWS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld

Amlan Kar et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure-strength relationship in friction-stir welded 6061-T6 aluminum alloy

Alexander Kalinenko et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Automation & Control Systems

Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium

Amlan Kar et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer

Amlan Kar et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

添加到收藏夹

Article Chemistry, Physical

Interfacial microstructure and mechanical properties of Al/Ti dissimilar joints fabricated via friction stir welding

Hongyun Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Engineering, Industrial

Microstructure and mechanical properties of friction stir lap AA6061-Ti6Al4V welds

Mingrun Yu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-Length Scale Characterization of Microstructure Evolution and Its Consequence on Mechanical Properties in Dissimilar Friction Stir Welding of Titanium to Aluminum

Amlan Kar et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A general strategy for the reliable joining of Al/Ti dissimilar alloys via ultrasonic assisted friction stir welding

Zhongwei Ma et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanocrystalline structural layer acts as interfacial bond in Ti/Al dissimilar joints produced by friction stir welding in power control mode

Victor F. Pereira et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Engineering, Manufacturing

Dissimilar friction stir welding of AA6061 and Ti6Al4V alloys: A study on microstructure and mechanical properties

Li Zhou et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Friction-stir welding and processing of Ti-6Al-4V titanium alloy: A review

S. Mironov et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dissimilar friction stir welding of pure Ti and pure Al

Jeong-Won Choi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Two-pass friction stir welding of aluminum alloy to titanium alloy: A simultaneous improvement in mechanical properties

Amlan Kar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium

Amlan Kar et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

State of the art about dissimilar metal friction stir welding

Aude Simar et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new method of hybrid friction stir welding assisted by friction surfacing for joining dissimilar Ti/Al alloy

Yongxian Huang et al.

MATERIALS LETTERS (2017)

添加到收藏夹

Article Engineering, Mechanical

FRICTION STIR WELDING OF DISSIMILAR JOINTS BETWEEN COMMERCIALLY PURE TITANIUM ALLOY AND 7075 ALUMINIUM ALLOY

Mojtaba Sadeghi-Ghoghery et al.

TRANSACTIONS OF FAMENA (2017)

添加到收藏夹

Article Chemistry, Physical

Effects of processing variables and heat treatments on Al/Ti-6Al-4V interface microstructure of bimetal clad-plate fabricated via a novel route employing friction stir lap welding

Bo Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interface and properties of the friction stir welded joints of titanium alloy Ti6Al4V with aluminum alloy 6061

Aiping Wu et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructures in interface region and mechanical behaviours of friction stir lap Al6060 to Ti-6Al-4V welds

Z. W. Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of probe offset distance on interfacial microstructure and mechanical properties of friction stir butt welded joint of Ti6Al4V and A6061 dissimilar alloys

Zhihua Song et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dissimilar friction stir welding of Ti-6Al-4V alloy and aluminum alloy employing a modified butt joint configuration: Influences of process variables on the weld interfaces and tensile properties

Bo Li et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Joining aluminum to titanium alloy by friction stir lap welding with cutting pin

Yanni Wei et al.

MATERIALS CHARACTERIZATION (2012)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Influence of Zinc on the Microstructure and Brittle Phases of Friction Stir Welded Joint of Al/Ti Dissimilar Alloys

Yuhua Chen et al.

MATERIALS SCIENCE AND ENGINEERING APPLICATION II (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dissimilar Metal Joining of 2024 and 7075 Aluminium Alloys to Titanium Alloys by Friction Stir Welding

Masayuki Aonuma et al.

MATERIALS TRANSACTIONS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys

Y. C. Chen et al.

MATERIALS & DESIGN (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3

Ulrike Dressler et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.