4.5 Article

Thermoelectric performance of (±) Camphor-10-sulfonic acid doped polyaniline/graphitic carbon nitride composite films

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Formulation of new screen printable PANI and PANI/Graphite based inks: Printing and characterization of flexible thermoelectric generators

Ramakrishna Nayak et al.

Summary: The research found that diacetone alcohol significantly improved the electrical conductivity of polyaniline, while cellulose acetate increased resistivity and carrier mobility. Graphite improved the crystallinity of the composite inks but reduced carrier mobility, carrier concentration, and bandgap. The porous ink film structure from screen printing helped reduce the thermal conductivity of the PANI ink.

ENERGY (2022)

Article Materials Science, Multidisciplinary

Structure and thermoelectric behavior of polyaniline-based/CNT-composite

Ayat Abd-Elsalam et al.

Summary: Thermoelectric polymer composites have attracted attention due to their low density, versatility, ease of synthesis and low thermal conductivity. In this study, pristine polyaniline and polyaniline/carbon nanotubes composite were successfully synthesized and characterized. The composite exhibited a high Seebeck coefficient and power factor at high temperature, and the electrical conductivity was significantly improved.

CURRENT APPLIED PHYSICS (2022)

Article Materials Science, Multidisciplinary

Enhanced thermoelectric properties of highly conductive poly (3,4-ethylenedioxy thiophene)/exfoliated graphitic carbon nitride composites

Volkan Ugraskan et al.

Summary: This study investigates the thermoelectric properties of graphene-like carbon nitride (g-C3N4) filled poly (3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT: PSS). It is found that exfoliated g-C3N4 is a promising material to enhance the electrical conductivity and power factor of PEDOT:PSS.

SYNTHETIC METALS (2022)

Review Chemistry, Multidisciplinary

Recent Advances in Polyaniline-Based Thermoelectric Composites

Siqi Liu et al.

Summary: This mini review focuses on key strategies in developing high-performance PANI-based TE materials, including doping engineering, modulation of molecular orientation, inorganic nanoparticles incorporation, interface engineering, and other strategies, which have greatly enhanced the overall performance of PANI-based TE composites for sustainable energy utilization.

CCS CHEMISTRY (2021)

Article Nanoscience & Nanotechnology

Enhanced-Performance PEDOT:PSS/Cu2Se-Based Composite Films for Wearable Thermoelectric Power Generators

Yao Lu et al.

Summary: In this study, a flexible PEDOT:PSS/Cu2Se-based nanocomposite film was prepared on a nylon membrane using vacuum filtration and hot pressing, demonstrating significantly improved thermoelectric properties. The optimized film showed a high power factor at 400K and excellent flexibility, retaining 85% of the power factor after 1000 bending cycles. Additionally, when paired with n-type PEDOT/Ag2Se/CuAgSe films, a flexible TE generator produced a maximum voltage and power output at a temperature difference of 44K.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Ceramics

Enhanced thermoelectric properties of tungsten oxide-reduced graphene oxide nanocomposites

Amish Kumar Gautam et al.

Summary: This article synthesized tungsten oxide nanoparticles and tungsten oxide-reduced graphene oxide nanocomposites, and studied their thermoelectric properties. The results showed that the thermoelectric material figure of merit of WO3-rGO nanocomposites increased by 8.8 times at 313K, with significantly enhanced electrical conductivity and reduced thermal conductivity compared to WO3 nanoparticles.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Physical

Three-dimensional hierarchical PANI/Bi2S3 nanoflowers heterojunction for enhanced photoelectrochemical water splitting

Surbhi Sharma et al.

Summary: The study presents a nanocomposite photoelectrode of PANI/Bi2S3 with enhanced photocurrent density and charge separation efficiency. The improved PEC performance of PANI/Bi2S3 is attributed to its hierarchical semiconductor heterojunction, visible light absorption, and efficient charge transport properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Nanoscience & Nanotechnology

Enhanced Thermoelectric Performance of Carbon Nanotubes/Polyaniline Composites by Multiple Interface Engineering

Hui Li et al.

Summary: By sequentially dedoping and redoping, the interface structure of carbon nanotubes/polyaniline composite films can be effectively regulated to enhance their thermoelectric properties. This leads to improved electrical conductivity, maintained Seebeck coefficient, and significantly higher power factor, making it suitable for energy-harvesting electronic devices.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Physical

A comprehensive review on the output voltage/power of wearable thermoelectric generators concerning their geometry and thermoelectric materials

Zohreh Soleimani et al.

Summary: Wearable thermoelectric generators' high output efficiency depends on TE materials and the structure of TE legs. In the research, it was found that inorganic, hybrid, and organic TE materials exhibit superior output powers in different types of legs.

NANO ENERGY (2021)

Article Engineering, Electrical & Electronic

Polyaniline/Graphitic Carbon Nitride Nanocomposites with Improved Thermoelectric Properties

Volkan Ugraskan et al.

Summary: The study found that adding g-C3N4 to PANI-CSA could significantly improve its Seebeck coefficient and power factor, making it a promising polymer-based thermoelectric material.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Article Nanoscience & Nanotechnology

PANI coupled hierarchical Bi2S3 nanoflowers based hybrid nanocomposite for enhanced thermoelectric performance

Surbhi Sharma et al.

Summary: This study demonstrated an effective strategy of coupling 3D hierarchical Bi2S3 nanoflowers with conducting polymer PANI to enhance the electrical conductivity and reduce the thermal conductivity, resulting in an overall improvement in the figure of merit (ZT). This approach provides a promising method for optimizing the thermoelectric properties of materials.

NANOTECHNOLOGY (2021)

Article Multidisciplinary Sciences

Effect of polyaniline content and protonating dopants on electroconductive composites

Katarzyna Bednarczyk et al.

Summary: Elastic constructive elements prepared by electrospinning using polyacrylonitrile/polyaniline (PAN/PANI) electroconductive composites were studied for their thermal and mechanical properties. Composites doped with sulfuric acid exhibited the highest conductivity, while composites doped with hydrochloric acid showed the highest thermal stability. All prepared composites showed good thermal stability, with T-5 values increasing with PANI content.

SCIENTIFIC REPORTS (2021)

Review Materials Science, Multidisciplinary

A review on conductive polymers and their hybrids for flexible and wearable thermoelectric applications

G. Prunet et al.

Summary: There is a growing demand for flexible and wearable next-generation electronic devices that can bend and stretch under mechanical deformation. Energy harvesting technologies have heavily invested in organic and polymeric semiconducting materials for their large-area synthesis, low cost, low toxicity, high flexibility, and tunable electronic properties. Various research has made progress in stretchable, wearable thermoelectric devices that can harvest energy from a temperature gradient and produce electricity.

MATERIALS TODAY PHYSICS (2021)

Article Materials Science, Composites

Engineering doping level for enhanced thermoelectric performance of carbon nanotubes/polyaniline composites

Hui Li et al.

Summary: This study optimized the microstructure and improved the thermoelectric properties of CNTs/PANI composites by modulating the doping level of PANI, leading to enhanced Seebeck coefficient and power factor. The results demonstrate an effective strategy for improving the thermoelectric performance of CNTs/PANI composites through precise tuning of the doping level.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Polymer Science

Hierarchical PANI/CdS nanoarchitecture system for visible light induced photocatalytic dye degradation and photoelectrochemical water splitting

Surbhi Sharma et al.

Summary: A three-dimensional hierarchical PANI/CdS nanocomposite and heterojunction photoanode system were rationally designed, showing significantly enhanced visible light driven photocatalytic and photoelectrochemical activity, with higher photocurrent density and photocatalytic activity compared to CdS nanoflowers.

POLYMER (2021)

Article Materials Science, Multidisciplinary

Tuned Fermi Level and Improved Thermoelectric Performance in Bi2Te3 Nanocomposites Reinforced with g-C3N4 Nanosheets

P. Shyni et al.

Summary: Incorporation of g-C3N4 nanosheets in Bi2Te3 matrix can tune the thermoelectric properties, reduce thermal conductivity, and enhance the performance of thermoelectric materials. Shift in fermi level and effective scattering of phonons by the added nanosheets play key roles in improving ZT value.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Energy Filtering of Charge Carriers: Current Trends, Challenges, and Prospects for Thermoelectric Materials

Chhatrasal Gayner et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Design of 2D-2D NiO/g-C3N4 heterojunction photocatalysts for degradation of an emerging pollutant

Kezhen Qi et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2020)

Article Polymer Science

Electropolymerization of polyaniline nanowires on poly(2-hydroxyethyl methacrylate) coated Platinum electrode

Maria Fernanda Xavier Pinto Medeiros et al.

POLIMEROS-CIENCIA E TECNOLOGIA (2020)

Article Materials Science, Multidisciplinary

Fabrication of well-isolated graphene and evaluation of thermoelectric performance of polyaniline-graphene composite film

Takuji Ube et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Engineering, Electrical & Electronic

The effect of polystyrene sulfonate on the thermoelectric properties of polyaniline/silver nanowires nanocomposites

Fei-Peng Du et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Polymer Science

Composite of polyaniline-bismuth selenide with enhanced thermoelectric performance

M. Mitra et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Article Engineering, Electrical & Electronic

Polyaniline intercalated with MoS2 nanosheets: structural, electric and thermoelectric properties

Dominique Mombru et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Polymer Science

Writing in a Polyaniline Film with Laser Beam and Stability of the Record: A Raman Spectroscopy Study

Zuzana Moravkova et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2018)

Article Chemistry, Physical

Strong anisotropy in thermoelectric properties of CNT/PANI composites

Jikun Chen et al.

CARBON (2017)

Article Nanoscience & Nanotechnology

Transport and thermoelectric properties of polyaniline/reduced graphene oxide nanocomposites

Rakibul Islam et al.

NANOTECHNOLOGY (2014)

Article Materials Science, Multidisciplinary

Preparation and thermoelectric properties of reduced graphene oxide/PEDOT:PSS composite films

Fengyuan Li et al.

SYNTHETIC METALS (2014)

Article Engineering, Electrical & Electronic

Thermoelectric Properties of Polyaniline Films with Different Doping Concentrations of (±)-10-Camphorsulfonic Acid

Hiroaki Anno et al.

JOURNAL OF ELECTRONIC MATERIALS (2013)

Article Multidisciplinary Sciences

Metallic transport in polyaniline

K Lee et al.

NATURE (2006)