☆ 4.8 Article

Grain Regrowth and Bifacial Passivation for High-Efficiency Wide-Bandgap Perovskite Solar Cells

ADVANCED ENERGY MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Multidisciplinary

Origin of Efficiency and Stability Enhancement in High-Performing Mixed Dimensional 2D-3D Perovskite Solar Cells: A Review

Md Arafat Mahmud et al.

Summary: The mixed-dimensional 2D-3D perovskite solar cells, incorporating long carbon-chain organic spacer cations, have shown promising results in terms of enhancing both device efficiency and stability. By carefully balancing the composition of 2D and 3D perovskite, researchers aim to take advantage of the specific properties of each material phase for further improvement.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite-organic tandem solar cells with indium oxide interconnect

K. O. Brinkmann et al.

Summary: Multijunction solar cells can surpass the efficiency limits of single-junction devices. Metal halide perovskite solar cells, in combination with silicon and copper indium gallium selenide (CIGS) or as all-perovskite tandems, have shown promising results. Narrow-gap non-fullerene acceptors have also significantly improved the efficiencies of organic solar cells. In this study, perovskite-organic tandem cells with high efficiency and voltage are demonstrated, utilizing optimized charge extraction layers and an ultrathin metal-like indium oxide layer for interconnection. This milestone work outperforms the best perovskite single junctions and is comparable to perovskite-CIGS and all-perovskite multijunctions.

NATURE (2022)

添加到收藏夹

Article Optics

Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells

Hao Chen et al.

Summary: The energy landscape of reduced-dimensional perovskites (RDPs) can be tailored by adjusting their layer width. In this study, a method to increase the layer width of RDPs in 2D/3D heterostructures is reported to address electron blocking at the interface. This method allows for the development of efficient inverted perovskite solar cells with high stability.

NATURE PHOTONICS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions

Randi Azmi et al.

Summary: By tailoring the dimensional fragments of two-dimensional perovskite layers, damp-heat stable perovskite solar cells with high power conversion efficiencies were successfully fabricated. These cells retain over 95% of their initial value after more than 1000 hours under damp-heat test conditions, meeting one of the critical industrial stability standards for photovoltaic modules.

SCIENCE (2022)

添加到收藏夹

Article Optics

Defect engineering in wide-bandgap perovskites for efficient perovskite-silicon tandem solar cells

Guang Yang et al.

Summary: By employing tribromide ions to reduce charge recombination, efficient wide-bandgap mixed-halide perovskite-silicon tandem solar cells with an efficiency of up to 28.6% are reported, while also enhancing device stability.

NATURE PHOTONICS (2022)

添加到收藏夹

Review Chemistry, Physical

Wide-Bandgap Metal Halide Perovskites for Tandem Solar Cells

Jinhui Tong et al.

Summary: Metal halide perovskite solar cells have emerged as the most promising new-generation solar cell technology, especially for wide-bandgap solar cells. Research progress on developing wide-bandgap PSCs and utilizing them in tandem configurations has been highlighted, emphasizing on efficiency improvement and stability challenges.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Optics

Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation

Guang Yang et al.

Summary: An effective approach to reduce photovoltage loss in metal halide perovskite solar cells is through the passivation of internal bulk defects and dimensionally graded two-dimensional perovskite interface defects. This method resulted in significantly low photovoltage loss and improved operational stability across different bandgap systems.

NATURE PHOTONICS (2021)

添加到收藏夹

Review Chemistry, Physical

Pseudo-Halide Perovskite Solar Cells

Pei-Ying Lin et al.

Summary: Perovskite solar cells have achieved high power conversion efficiency, but the intrinsic instability of perovskite materials remains a key issue. Studies have shown that mixed-halide perovskites and other negative monovalent ions can improve stability. This review presents the evolution and applications of pseudo-halide perovskite solar cells.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Wide-bandgap organic-inorganic hybrid and all-inorganic perovskite solar cells and their application in all-perovskite tandem solar cells

Rui He et al.

Summary: The past decade has seen significant advancements in perovskite solar cells, particularly in the role of wide-bandgap PSCs in tandem solar cells. Current efforts are focused on addressing stability and efficiency issues in both organic-inorganic hybrid perovskites and all-inorganic perovskites.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Reducing Detrimental Defects for High-Performance Metal Halide Perovskite Solar Cells

Luis K. Ono et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Origin of Open-Circuit Voltage Enhancements in Planar Perovskite Solar Cells Induced by Addition of Bulky Organic Cations

Chieh-Ting Lin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Inkjet-Printed Micrometer-Thick Perovskite Solar Cells with Large Columnar Grains

Helge Eggers et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

2D/3D Heterostructure for Semitransparent Perovskite Solar Cells with Engineered Bandgap Enables Efficiencies Exceeding 25% in Four-Terminal Tandems with Silicon and CIGS

Saba Gharibzadeh et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites

Daehan Kim et al.

SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment

Hui Li et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Chemistry, Physical

Halide Segregation versus Interfacial Recombination in Bromide-Rich Wide-Gap Perovskite Solar Cells

Francisco Pena-Camargo et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Revealing the origin of voltage loss in mixed-halide perovskite solar cells

Suhas Mahesh et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Energy & Fuels

Enhancing Charge Transport of 2D Perovskite Passivation Agent for Wide-Bandgap Perovskite Solar Cells Beyond 21%

Jiselle Y. Ye et al.

SOLAR RRL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Role of Bulk and Interface Recombination in High-Efficiency Low-Dimensional Perovskite Solar Cells

Shanshan Zhang et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

On the Relation between the Open-Circuit Voltage and Quasi-Fermi Level Splitting in Efficient Perovskite Solar Cells

Pietro Caprioglio et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS

Dong Hoe Kim et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells

Peng Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced photovoltage for inverted planar heterojunction perovskite solar cells

Deying Luo et al.

SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Enhancing Defect Tolerance and Phase Stability of High-Bandgap Perovskites via Guanidinium Alloying

Ryan J. Stoddard et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Review Energy & Fuels

Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors

Tomas Leijtens et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Energy & Fuels

Techno-economic viability of silicon-based tandem photovoltaic modules in the United States

Zhengshan J. Yu et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques

Zhaoning Song et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells

Woon Seok Yang et al.

SCIENCE (2017)

添加到收藏夹

Article Energy & Fuels

Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites

Zhiping Wang et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Tabulated values of the Shockley-Queisser limit for single junction solar cells

Sven Ruhle

SOLAR ENERGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications

Duyen H. Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Chemistry, Physical

Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic Performance

Stefaan De Wolf et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.