4.8 Article

Smart Deep Eutectic Electrolyte Enabling Thermally Induced Shutdown Toward High-Safety Lithium Metal Batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

A Janus Li1.5Al0.5Ge1.5(PO4)3 with high critical current density for high-voltage lithium batteries

Wenping Zha et al.

Summary: By fabricating an in-situ Janus LAGP, the chemical instability with lithium metal and poor interfacial compatibility with high-voltage cathodes have been simultaneously addressed, leading to significantly improved performance of solid-state lithium batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

Practical High-Voltage Lithium Metal Batteries Enabled by Tuning the Solvation Structure in Weakly Solvating Electrolyte

Thuy Duong Pham et al.

Summary: This study develops a high concentration electrolyte (HCE) that effectively suppresses dendrites and enhances stability in Li metal batteries. The HCE shows good performance under high current density and has potential for applications in high-voltage Li metal batteries and anode-free batteries.
Article Nanoscience & Nanotechnology

Ultrahigh Elastic Polymer Electrolytes for Solid-State Lithium Batteries with Robust Interfaces

Tianxiang Zheng et al.

Summary: An ultrahigh elastic solid polymer electrolyte based on cross-linked polyurethane, succinonitrile, and lithium bistrifluoromethanesulfonimide was reported, exhibiting excellent ionic conductivity and cycling life for solid-state lithium batteries. Its outstanding performance is attributed to the robust electrode/electrolyte interfaces, greatly reducing charge-transfer resistance.

ACS APPLIED MATERIALS & INTERFACES (2022)

Review Chemistry, Multidisciplinary

Interface Issues and Challenges in All-Solid-State Batteries: Lithium, Sodium, and Beyond

Shuaifeng Lou et al.

Summary: This article discusses the interface principles and engineering in all-solid-state batteries, emphasizing the importance of interface physics and chemistry in battery performance, and proposing strategies to address technical challenges.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Regulating Interfacial Chemistry in Lithium-Ion Batteries by a Weakly Solvating Electrolyte**

Yu-Xing Yao et al.

Summary: The research reveals a weakly solvating electrolyte that improves the performance of Li-ion batteries by forming unique anion-derived interfaces, demonstrating fast-charging and long-term cycling characteristics.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Monoanion-regulated high-voltage nitrile-based solid electrolyte with compatible lithium inertness

Qian Hou et al.

Summary: Through the design of monoanion-regulated high-voltage PSEs, lithium-inert properties can be achieved to enhance the cycling performance and stability of plastic solid electrolytes, providing a new approach for the development of all-solid-state batteries.

ENERGY STORAGE MATERIALS (2021)

Article Engineering, Environmental

Anchoring succinonitrile by solvent-Li+ associations for high-performance solid-state lithium battery

Wenping Zha et al.

Summary: A new type of highly Li+ conductive and mechanically strong composite solid-state electrolyte, SN-CSSE, was developed for room-temperature solid-state lithium battery with excellent ionic conductivity and cycling stability. The electrolyte showed wide electrochemical window, strong mechanical strength, and high interfacial compatibility with Li, demonstrating great potential for safety-critical battery systems.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Improved Li+ Transport in Polyacetal Electrolytes: Conductivity and Current Fraction in a Series of Polymers

Rachel L. Snyder et al.

Summary: Polymer electrolytes are an effective solution to the safety issues of flammable liquid electrolytes in lithium-ion batteries. The newly developed polyacetal electrolytes show improved ion transport, particularly in terms of increased current fraction and lithium ion mobility. Conductivity and current fraction were found to be positively correlated with the composition of the polymer, leading to the identification of two polymers-P(EO-MO) and P(EO-2MO)- that outperform PEO at different salt concentrations.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

In situ fabricated ceramic/polymer hybrid electrolyte with vertically aligned structure for solid-state lithium batteries

Wenping Zha et al.

Summary: The study utilizes ice-templated Li1.5Al0.5Ge1.5(PO4)3 with vertically aligned channels to enhance the mechanical properties and lithium ion transport efficiency of the plastic crystal electrolyte, resulting in a high ionic conductivity and wide electrochemical window for the LAGP/SN hybrid electrolyte. The affinity between LAGP and SN-based electrolyte, confirmed by DFT calculation and in-situ thermal polymerization, provides sufficient electrolyte diffusion pathways and contributes to the cycling stability of batteries. The solid-state lithium batteries employing this hybrid electrolyte demonstrate excellent room-temperature rate capability and stable cycling performance, showcasing a promising potential for practical applications.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Microstructure boosting the cycling stability of LiNi0.6Co0.2Mn0.2O2 cathode through Zr-based dual modification

Liu Yao et al.

Summary: The study introduced a strategy of Zr doping and LixZryOz surface coating to improve the cycling stability and capacity retention of Ni-rich NCM cathode materials, with enhanced bulk stability and optimized microstructure contributing to the improved performance.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Accurate and Transferable Reactive Molecular Dynamics Models from Constrained Density Functional Theory

Chenghan Li et al.

Summary: The study introduces accurate and transferable reactive molecular dynamics models derived from constrained density functional theory, which can be used for proton dissociation reactions of amino acids in both aqueous and protein environments, showing potential for widespread application.

JOURNAL OF PHYSICAL CHEMISTRY B (2021)

Article Chemistry, Multidisciplinary

A Single-Ion Conducting Borate Network Polymer as a Viable Quasi-Solid Electrolyte for Lithium Metal Batteries

Dong-Myeong Shin et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Physical

Nonflammable Nitrile Deep Eutectic Electrolyte Enables High-Voltage Lithium Metal Batteries

Zhenglin Hu et al.

CHEMISTRY OF MATERIALS (2020)

Article Biochemistry & Molecular Biology

Theoretical study on cyclophane amide molecular receptors and its complexation behavior with TCNQ

Soma Sundaram Meenakshi Sundaram et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY (2020)

Article Chemistry, Multidisciplinary

In Situ Formation of Li3P Layer Enables Fast Li+ Conduction across Li/Solid Polymer Electrolyte Interface

Nan Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

High-Safety and High-Energy-Density Lithium Metal Batteries in a Novel Ionic-Liquid Electrolyte

Hao Sun et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

A safe and non-flammable sodium metal battery based on an ionic liquid electrolyte

Hao Sun et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

An Intrinsic Flame-Retardant Organic Electrolyte for Safe Lithium-Sulfur Batteries

Huijun Yang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Physical

A Concentrated Ternary-Salts Electrolyte for High Reversible Li Metal Battery with Slight Excess Li

Feilong Qiu et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Multidisciplinary

Intercalated Water and Organic Molecules for Electrode Materials of Rechargeable Batteries

Hyeon Jeong Lee et al.

ADVANCED MATERIALS (2018)

Review Chemistry, Physical

Advancing Lithium Metal Batteries

Bin Liu et al.

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Review Chemistry, Multidisciplinary

Ionic-Liquid-Based Polymer Electrolytes for Battery Applications

Irene Osada et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Multidisciplinary

Polymerized Ionic Networks with High Charge Density: Quasi-Solid Electrolytes in Lithium-Metal Batteries

Pengfei Zhang et al.

ADVANCED MATERIALS (2015)

Review Chemistry, Multidisciplinary

Safer Electrolytes for Lithium-Ion Batteries: State of the Art and Perspectives

Julian Kalhoff et al.

CHEMSUSCHEM (2015)

Article Chemistry, Multidisciplinary

Ionic-Liquid-Nanoparticle Hybrid Electrolytes: Applications in Lithium Metal Batteries

Yingying Lu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Review Chemistry, Multidisciplinary

Electrolytes and Interphases in Li-Ion Batteries and Beyond

Kang Xu

CHEMICAL REVIEWS (2014)

Review Chemistry, Multidisciplinary

Lithium metal anodes for rechargeable batteries

Wu Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Review Chemistry, Multidisciplinary

Challenges Facing Lithium Batteries and Electrical Double-Layer Capacitors

Nam-Soon Choi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Review Multidisciplinary Sciences

Electrical Energy Storage for the Grid: A Battery of Choices

Bruce Dunn et al.

SCIENCE (2011)

Article Polymer Science

Supramolecular Framework Based on Pyridiniodiketone Ligand via Non-classic Hydrogen Bonding

Lijun Song et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2009)

Article Electrochemistry

Room temperature molten salts as lithium battery electrolyte

B Garcia et al.

ELECTROCHIMICA ACTA (2004)