相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Cartilage tissue engineering combining microspheroid building blocks and microneedle arrays
Shawn P. Grogan et al.
CONNECTIVE TISSUE RESEARCH (2020)
A Physiology-Inspired Multifactorial Toolbox in Soft-to-Hard Musculoskeletal Interface Tissue Engineering
Isabel Calejo et al.
TRENDS IN BIOTECHNOLOGY (2020)
In situ tissue engineering of the tendon-to-bone interface by endogenous stem/progenitor cells
Solaiman Tarafder et al.
BIOFABRICATION (2020)
Multimaterial Dual Gradient Three-Dimensional Printing for Osteogenic Differentiation and Spatial Segregation
Brandon T. Smith et al.
TISSUE ENGINEERING PART A (2020)
Therapeutic Tool in Reconstruction and Regeneration of Tissue Engineering for Osteochondral Repair
Xueyan Hu et al.
APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY (2020)
Efficient myotube formation in 3D bioprinted tissue construct by biochemical and topographical cues
WonJin Kim et al.
BIOMATERIALS (2020)
Investigation of multiphasic 3D-bioplotted scaffolds for site-specific chondrogenic and osteogenic differentiation of human adipose-derived stem cells for osteochondral tissue engineering applications
Liliana F. Mellor et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2020)
Mechanical properties of hybrid triphasic scaffolds for osteochondral tissue engineering
Alicja Kosik-Koziol et al.
MATERIALS LETTERS (2020)
Development and thorough characterization of the processing steps of an ink for 3D printing for bone tissue engineering
Michael Mueller et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Three Dimensional Bioprinting of a Vascularized and Perfusable Skin Graft Using Human Keratinocytes, Fibroblasts, Pericytes, and Endothelial Cells
Tania Baltazar et al.
TISSUE ENGINEERING PART A (2020)
Tissue Engineering and Regenerative Medicine 2019: The Role of Biofabrication-A Year in Review
Tiago Ramos et al.
TISSUE ENGINEERING PART C-METHODS (2020)
U1 snRNP regulates cancer cell migration and invasion in vitro
Jung-Min Oh et al.
NATURE COMMUNICATIONS (2020)
Aspiration-assisted bioprinting for precise positioning of biologics
Bugra Ayan et al.
SCIENCE ADVANCES (2020)
Preparation and characterization of nanoclay-hydrogel composite support-bath for bioprinting of complex structures
Ferdows Afghah et al.
SCIENTIFIC REPORTS (2020)
3D Bioprinting of osteochondral tissue substitutes - in vitro-chondrogenesis in multi-layered mineralized constructs
David Kilian et al.
SCIENTIFIC REPORTS (2020)
Injectable photo-crosslinking cartilage decellularized extracellular matrix for cartilage tissue regeneration
Yong Xu et al.
MATERIALS LETTERS (2020)
Aspiration-assisted bioprinting of the osteochondral interface
Bugra Ayan et al.
SCIENTIFIC REPORTS (2020)
3D printing of a lithium-calcium-silicate crystal bioscaffold with dual bioactivities for osteochondral interface reconstruction
Lei Chen et al.
BIOMATERIALS (2019)
Biofabrication of spatially organised tissues by directing the growth of cellular spheroids within 3D printed polymeric microchambers
Andrew C. Daly et al.
BIOMATERIALS (2019)
Direct writing alginate bioink inside pre-polymers of hydrogels to create patterned vascular networks
Yongkang Wang et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Biodegradable water-based polyurethane scaffolds with a sequential release function for cell-free cartilage tissue engineering
Yi-Ting Wen et al.
ACTA BIOMATERIALIA (2019)
Advances in injectable self-healing biomedical hydrogels
Yujie Tu et al.
ACTA BIOMATERIALIA (2019)
Bioprinting of Human Musculoskeletal Interface
Wenbin Luo et al.
ADVANCED ENGINEERING MATERIALS (2019)
Pore-forming bioinks to enable spatio-temporally defined gene delivery in bioprinted tissues
T. Gonzalez-Fernandez et al.
JOURNAL OF CONTROLLED RELEASE (2019)
A new multilayered membrane for tissue engineering of oral hard- and soft tissue by means of melt electrospinning writing and film casting - An in vitro study
Andreas Fuchs et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2019)
Fully Three-Dimensional Bioprinted Skin Equivalent Constructs with Validated Morphology and Barrier Function
Kristy Derr et al.
TISSUE ENGINEERING PART C-METHODS (2019)
Carbon Nanodots Doped Super-paramagnetic Iron Oxide Nanoparticles for Multimodal Bioimaging and Osteochondral Tissue Regeneration via External Magnetic Actuation
Bodhisatwa Das et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Pouyan Ahangar et al.
APPLIED SCIENCES-BASEL (2019)
Angiogenic potential of co-spheroids of neural stem cells and endothelial cells in injectable gelatin-based hydrogel
Hao-Wei Han et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
3D Printed scaffolds with hierarchical biomimetic structure for osteochondral regeneration
Xuan Zhou et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2019)
Osteochondral Regeneration with 3D-Printed Biodegradable High-Strength Supramolecular Polymer Reinforced-Gelatin Hydrogel Scaffolds
Fei Gao et al.
ADVANCED SCIENCE (2019)
3D printing of biomimetic multi-layered GelMA/nHA scaffold for osteochondral defect repair
Jingyi Liu et al.
MATERIALS & DESIGN (2019)
3D Bioprinting: A Novel Avenue for Manufacturing Tissues and Organs
Bin Zhang et al.
ENGINEERING (2019)
Fabrication of Complex Hydrogel Structures Using Suspended Layer Additive Manufacturing (SLAM)
Jessica J. Senior et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
3D bioprinting models of neural tissues: The current state of the field and future directions
Laura de la Vega et al.
BRAIN RESEARCH BULLETIN (2019)
A Rabbit Model of Osteochondral Regeneration Using Three-Dimensional Printed Polycaprolactone-Hydroxyapatite Scaffolds Coated with Umbilical Cord Blood Mesenchymal Stem Cells and Chondrocytes
Pengfei Zheng et al.
MEDICAL SCIENCE MONITOR (2019)
Scaffold-Free Bioprinter Utilizing Layer-By-Layer Printing of Cellular Spheroids
Wesley LaBarge et al.
MICROMACHINES (2019)
Effect of Hierarchical Scaffold Consisting of Aligned dECM Nanofibers and Poly(lactide-co-glycolide) Struts on the Orientation and Maturation of Human Muscle Progenitor Cells
Hyeongjin Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Laser-Induced Forward Transfer: Fundamentals and Applications
Pere Serra et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
3D Molecularly Functionalized Cell-Free Biomimetic Scaffolds for Osteochondral Regeneration
Lan Li et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Micro/Nanometer-Structured Scaffolds for Regeneration of Both Cartilage and Subchondral Bone
Cuijun Deng et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Osteochondral regeneration using constructs of mesenchymal stem cells made by bio three-dimensional printing in mini-pigs
Atsushi Yamasaki et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2019)
3D Cell Printing of Perfusable Vascularized Human Skin Equivalent Composed of Epidermis, Dermis, and Hypodermis for Better Structural Recapitulation of Native Skin
Byoung Soo Kim et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Fabrication and mechanical characterization of 3D printed vertical uniform and gradient scaffolds for bone and osteochondral tissue engineering
Sean M. Bittner et al.
ACTA BIOMATERIALIA (2019)
Applications of decellularized extracellular matrix in bone and cartilage tissue engineering
Yu Seon Kim et al.
BIOENGINEERING & TRANSLATIONAL MEDICINE (2019)
Homogeneous hydroxyapatite/alginate composite hydrogel promotes calcified cartilage matrix deposition with potential for three-dimensional bioprinting
Fu You et al.
BIOFABRICATION (2019)
A definition of bioinks and their distinction from biomaterial inks
J. Groll et al.
BIOFABRICATION (2019)
Desktop-stereolithography 3D printing of a radially oriented extracellular matrix/mesenchymal stem cell exosome bioink for osteochondral defect regeneration
Pengfei Chen et al.
THERANOSTICS (2019)
Copper-incorporated bioactive glass-ceramics inducing anti-inflammatory phenotype and regeneration of cartilage/bone interface
Rongcai Lin et al.
THERANOSTICS (2019)
Scaffold-free bioprinted osteogenic and chondrogenic systems to model osteochondral physiology
Erick K. Breathwaite et al.
BIOMEDICAL MATERIALS (2019)
3D bioprinting of hydrogel constructs with cell and material gradients for the regeneration of full-thickness chondral defect using a microfluidic printing head
Joanna Idaszek et al.
BIOFABRICATION (2019)
Bioprinting of biomimetic skin containing melanocytes
Daejin Min et al.
EXPERIMENTAL DERMATOLOGY (2018)
A Stereolithography-Based 3D Printed Hybrid Scaffold for In Situ Cartilage Defect Repair
Elizabeth A. Aisenbrey et al.
MACROMOLECULAR BIOSCIENCE (2018)
Gradient nanocomposite hydrogels for interface tissue engineering
Lauren M. Cross et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2018)
Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications
Jesse K. Placone et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Regeneration of the Osteochondral Defect by a Wollastonite and Macroporous Fibrin Biphasic Scaffold
Tao Shen et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Regeneration of the Osteochondral Defect by a Wollastonite and Macroporous Fibrin Biphasic Scaffold
Tao Shen et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Three-Dimensional-Bioprinted Dopamine-Based Matrix for Promoting Neural Regeneration
Xuan Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Functionally graded multilayer scaffolds for in vivo osteochondral tissue engineering
Heemin Kang et al.
ACTA BIOMATERIALIA (2018)
3D bioprinting of tissues and organs for regenerative medicine
Sanjairaj Vijayavenkataraman et al.
ADVANCED DRUG DELIVERY REVIEWS (2018)
Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect
Fei Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
3D-Printed Biomimetic Scaffold Simulating Microfibril Muscle Structure
WonJin Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Three-Dimensional Bio-Printed Scaffold Sleeves With Mesenchymal Stem Cells for Enhancement of Tendon-to-Bone Healing in Anterior Cruciate Ligament Reconstruction Using Soft-Tissue Tendon Graft
Sin Hyung Park et al.
ARTHROSCOPY-THE JOURNAL OF ARTHROSCOPIC AND RELATED SURGERY (2018)
Harnessing biochemical and structural cues for tenogenic differentiation of adipose derived stem cells (ADSCs) and development of an in vitro tissue interface mimicking tendon-bone insertion graft
Sajeesh Kumar Madhurakkat Perikamana et al.
BIOMATERIALS (2018)
Rational design and fabrication of multiphasic soft network composites for tissue engineering articular cartilage: A numerical model-based approach
Onur Bas et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Progress in scaffold-free bioprinting for cardiovascular medicine
Nicanor I. Moldovan
JOURNAL OF CELLULAR AND MOLECULAR MEDICINE (2018)
3D printed cell-laden collagen and hybrid scaffolds for in vivo articular cartilage tissue regeneration
YoungWon Koo et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)
Additive manufacturing of biomaterials
Susmita Bose et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Tissue Engineering 3D Neurovascular Units: A Biomaterials and Bioprinting Perspective
Geoffrey Potjewyd et al.
TRENDS IN BIOTECHNOLOGY (2018)
Biofabrication: A Guide to Technology and Terminology
Lorenzo Moroni et al.
TRENDS IN BIOTECHNOLOGY (2018)
Bioprinting of mineralized constructs utilizing multichannel plotting of a self-setting calcium phosphate cement and a cell-laden bioink
Tilman Ahlfeld et al.
BIOFABRICATION (2018)
Bioactive Scaffolds for Regeneration of Cartilage and Subchondral Bone Interface
Cuijun Deng et al.
THERANOSTICS (2018)
Engineering Musculoskeletal Tissue Interfaces
Ece Bayrak et al.
FRONTIERS IN MATERIALS (2018)
A Novel Microplate 3D Bioprinting Platform for the Engineering of Muscle and Tendon Tissues
Sandra Laternser et al.
SLAS TECHNOLOGY (2018)
3D bioprinting of skin tissue: From pre-processing to final product evaluation
Wei-Cheng Yan et al.
ADVANCED DRUG DELIVERY REVIEWS (2018)
3D Printed Stem-Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds
Daeha Joung et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
3D printed biofunctionalized scaffolds for microfracture repair of cartilage defects
Ting Guo et al.
BIOMATERIALS (2018)
The enhanced osteogenesis and osteointegration of 3-DP PCL scaffolds via structural and functional optimization using collagen networks
Jinbing Wang et al.
RSC ADVANCES (2018)
In situ immune response and mechanisms of cell damage in central nervous system of fatal cases microcephaly by Zika virus
Raimunda S. S. Azevedo et al.
SCIENTIFIC REPORTS (2018)
3D printing of Mo-containing scaffolds with activated anabolic responses and bi-lineage bioactivities
Wentao Dang et al.
THERANOSTICS (2018)
Fabrication of scaffold-free tubular cardiac constructs using a Bio-3D printer
Kenichi Arai et al.
PLOS ONE (2018)
In vitro Chondrocyte Responses in Mg-doped Wollastonite/Hydrogel Composite Scaffolds for Osteochondral Interface Regeneration
Xinning Yu et al.
SCIENTIFIC REPORTS (2018)
3D Bioprinting Human Induced Pluripotent Stem Cell-Derived Neural Tissues Using a Novel Lab-on-a-Printer Technology
Laura de la Vega et al.
APPLIED SCIENCES-BASEL (2018)
Bioactive scaffolds with Li and Si ions-synergistic effects for osteochondral defects regeneration
Cuijun Deng et al.
APPLIED MATERIALS TODAY (2018)
3D Bioprinting for Tissue and Organ Fabrication
Yu Shrike Zhang et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Microfluidic Blood-Brain Barrier Model Provides In Vivo-Like Barrier Properties for Drug Permeability Screening
Ying I. Wang et al.
BIOTECHNOLOGY AND BIOENGINEERING (2017)
The Translational Significance of the Neurovascular Unit*
Heather L. McConnell et al.
JOURNAL OF BIOLOGICAL CHEMISTRY (2017)
Three-dimensional direct cell bioprinting for tissue engineering
Saime Burce Ozler et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)
Human Skin 3D Bioprinting Using Scaffold-Free Approach
Lea J. Pourchet et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Two-photon polymerization for biological applications
Alexander K. Nguyen et al.
MATERIALS TODAY (2017)
Principles of the Kenzan Method for Robotic Cell Spheroid-Based Three-Dimensional Bioprinting
Nicanor I. Moldovan et al.
TISSUE ENGINEERING PART B-REVIEWS (2017)
Injectable hydrogels for cartilage and bone tissue engineering
Mei Liu et al.
BONE RESEARCH (2017)
3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity
Michelle T. Poldervaart et al.
PLOS ONE (2017)
Analysis of the in vitro degradation and the in vivo tissue response to bi-layered 3D-printed scaffolds combining PLA and biphasic PLA/bioglass components - Guidance of the inflammatory response as basis for osteochondral regeneration
Mike Barbeck et al.
BIOACTIVE MATERIALS (2017)
Biologic Inlay Osteochondral Reconstruction: Arthroscopic One-Step Osteochondral Lesion Repair in the Knee Using Morselized Bone Grafting and Hyaluronic Acid-Based Scaffold Embedded With Bone Marrow Aspirate Concentrate
Boguslaw Sadlik et al.
ARTHROSCOPY TECHNIQUES (2017)
Functional Nanoclay Suspension for Printing-Then-Solidification of Liquid Materials
Yifei Jin et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Direct 3D cell-printing of human skin with functional transwell system
Byoung Soo Kim et al.
BIOFABRICATION (2017)
Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
R. Daniel Pedde et al.
ADVANCED MATERIALS (2017)
Bioprinting for vascular and vascularized tissue biofabrication
Pallab Datta et al.
ACTA BIOMATERIALIA (2017)
3D bioprinting of functional human skin: production and in vivo analysis
Nieves Cubo et al.
BIOFABRICATION (2017)
Current advances and future perspectives in extrusion-based bioprinting
Ibrahim T. Ozbolat et al.
BIOMATERIALS (2016)
Organization of Endothelial Cells, Pericytes, and Astrocytes into a 3D Microfluidic in Vitro Model of the Blood-Brain Barrier
Jack D. Wang et al.
MOLECULAR PHARMACEUTICS (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
[INVITED] Laser-induced forward transfer: A high resolution additive manufacturing technology
Philippe Delaporte et al.
OPTICS AND LASER TECHNOLOGY (2016)
Functional 3D Neural Mini-Tissues from Printed Gel-Based Bioink and Human Neural Stem Cells
Qi Gu et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells
Markus Rimann et al.
JALA (2016)
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Rodrigo Lozano et al.
BIOMATERIALS (2015)
Comparison of Clinical Outcome of Autograft and Allograft Reconstruction for Anterior Cruciate Ligament Tears
Yu-Hua Jia et al.
CHINESE MEDICAL JOURNAL (2015)
Massive rotator cuff tears: pathomechanics, current treatment options, and clinical outcomes
Joshua A. Greenspoon et al.
JOURNAL OF SHOULDER AND ELBOW SURGERY (2015)
Bioprinting for cancer research
Stephanie Knowlton et al.
TRENDS IN BIOTECHNOLOGY (2015)
The Blood-Brain Barrier
Richard Daneman et al.
COLD SPRING HARBOR PERSPECTIVES IN BIOLOGY (2015)
Three-Dimensional Blood-Brain Barrier Model for in vitro Studies of Neurovascular Pathology
Hansang Cho et al.
SCIENTIFIC REPORTS (2015)
Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
Thomas J. Hinton et al.
SCIENCE ADVANCES (2015)
Biomaterials for Integration with 3-D Bioprinting
Aleksander Skardal et al.
ANNALS OF BIOMEDICAL ENGINEERING (2015)
3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers
Mingchun Du et al.
BIOFABRICATION (2015)
A 3D bioprinted complex structure for engineering the muscle-tendon unit
Tyler K. Merceron et al.
BIOFABRICATION (2015)
Engineering Anisotropic Biomimetic Fibrocartilage Microenvironment by Bioprinting Mesenchymal Stem Cells in Nanoliter Gel Droplets
Umut A. Gurkan et al.
MOLECULAR PHARMACEUTICS (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Vivian Lee et al.
TISSUE ENGINEERING PART C-METHODS (2014)
A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting
Ju Young Park et al.
BIOFABRICATION (2014)
The neuromuscular junction: aging at the crossroad between nerves and muscle
Marta Gonzalez-Freire et al.
FRONTIERS IN AGING NEUROSCIENCE (2014)
Strategies for osteochondral repair: Focus on scaffolds
Seog-Jin Seo et al.
JOURNAL OF TISSUE ENGINEERING (2014)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology
Tao Xu et al.
BIOMATERIALS (2013)
BBB ON CHIP: microfluidic platform to mechanically and biochemically modulate blood-brain barrier function
L. M. Griep et al.
BIOMEDICAL MICRODEVICES (2013)
Subchondral bone in osteoarthritis: insight into risk factors and microstructural changes
Guangyi Li et al.
ARTHRITIS RESEARCH & THERAPY (2013)
Skin tissue generation by laser cell printing
Lothar Koch et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Tissue-Engineering Strategies for the Tendon/Ligament-to-Bone Insertion
Lester Smith et al.
CONNECTIVE TISSUE RESEARCH (2012)
Characterization of a microfluidic in vitro model of the blood-brain barrier (μBBB)
Ross Booth et al.
LAB ON A CHIP (2012)
Structural Mechanism of ER Retrieval of MHC Class I by Cowpox
William H. McCoy et al.
PLOS BIOLOGY (2012)
The Cartilage-Bone Interface
Caroline D. Hoemann et al.
JOURNAL OF KNEE SURGERY (2012)
Bioprinting of growth factors onto aligned sub-micron fibrous scaffolds for simultaneous control of cell differentiation and alignment
Elmer D. F. Ker et al.
BIOMATERIALS (2011)
Anatomy and Physiology of the Skin
Paul A. J. Kolarsick et al.
JOURNAL OF THE DERMATOLOGY NURSES ASSOCIATION (2011)
Inkjet Printing-Process and Its Applications
Madhusudan Singh et al.
ADVANCED MATERIALS (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
To build a synapse: signaling pathways in neuromuscular junction assembly
Haitao Wu et al.
DEVELOPMENT (2010)
Cell adhesion and signaling networks in brain neurovascular units
Joseph H. McCarty
CURRENT OPINION IN HEMATOLOGY (2009)
Three-dimensional bioprinting of rat embryonic neural cells
Wonhye Lee et al.
NEUROREPORT (2009)
Engineering Orthopedic Tissue Interfaces
Peter J. Yang et al.
TISSUE ENGINEERING PART B-REVIEWS (2009)
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Brian Derby
JOURNAL OF MATERIALS CHEMISTRY (2008)
Microenvironments engineered by inkjet bioprinting spatially direct adult stem cells toward muscle- and bone-like subpopulations
Julie A. Phillippi et al.
STEM CELLS (2008)
Tendons and ligaments are anatomically distinct but overlap in molecular and morphological features - A comparative study in an ovine model
Adam P. Rumian et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2007)
A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds
Y Lu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Where tendons and ligaments meet bone: attachment sites ('entheses') in relation to exercise and/or mechanical load
M Benjamin et al.
JOURNAL OF ANATOMY (2006)
Molecular architecture of the neuromuscular junction
BW Hughes et al.
MUSCLE & NERVE (2006)
Structural and functional features of human muscle-tendon unit
T Finni
SCANDINAVIAN JOURNAL OF MEDICINE & SCIENCE IN SPORTS (2006)
Survival and proliferative ability of various living cell types after laser-induced forward transfer
B Hopp et al.
TISSUE ENGINEERING (2005)
Autologous chondrocyte implantation for cartilage repair: monitoring its success by magnetic resonance imaging and histology
S Roberts et al.
ARTHRITIS RESEARCH & THERAPY (2003)