4.6 Article

Investigations of CrN+Cr2O3/TiO2 coatings obtained in a PVD/ALD hybrid method on austenitic 316L steel substrate

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Investigations of TiO2/NanoTiO2 Bimodal Coatings Obtained by a Hybrid PVD/ALD Method on Al-Si-Cu Alloy Substrate

Marcin Staszuk et al.

Summary: This study investigated the influence of bimodal TiO2/nanoTiO2 coatings obtained through the PVD/ALD hybrid process on an Al-Si-Cu-type aluminium alloy. The results showed that the TiO2/nanoTiO2 bimodal coating exhibited the highest corrosion resistance and improved tribological contact with the counter-specimen.

COATINGS (2022)

Article Engineering, Environmental

Stainless steel: A high potential material for green electrochemical energy storage and conversion

Moonsu Kim et al.

Summary: This review presents the recent advances and breakthroughs in surface treatment approaches for stainless steel electrodes in green energy storage and conversion systems. Various surface treatment techniques have been developed to improve the performance of stainless steel electrodes and make full use of the active elements in stainless steel.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

The Influence of ZnO Oxide Layer on the Physicochemical Behavior of Ti6Al4V Titanium Alloy

Anna Wozniak et al.

Summary: Titanium and its alloys are known for their high biocompatibility and corrosion resistance, but degradation products may cause allergic reactions and bone resorption. This study analyzed the corrosion resistance of Ti6Al4V alloy and found that surface modification with a zinc oxide layer improved its physicochemical properties and corrosion resistance.

MATERIALS (2021)

Review Metallurgy & Metallurgical Engineering

Recent progress in superhydrophobic coating on Mg alloys: A general review

Feng Peng et al.

Summary: Surface modification plays a critical role in improving the corrosion resistance of magnesium and its alloys, with superhydrophobic coatings inspired by nature serving as an effective protective method due to their water contact angle greater than 150 degrees. The review discusses the model and protection mechanism of superhydrophobic coatings, as well as methods for fabricating them on Mg alloys and functional coatings for enhanced performance. Challenges and future research directions in this field are also highlighted for potential advancements.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Chemistry, Physical

Abrasive Wear, Scuffing and Rolling Contact Fatigue of DLC-Coated 18CrNiMo7-6 Steel Lubricated by a Pure and Contaminated Gear Oil

Waldemar Tuszynski et al.

Summary: The study suggests that to reduce abrasion, scuffing, and pitting of gears in extreme mining conveyor conditions, the deposition of W-DLC/CrN coating should be considered, as it also provides good protection when the lubricating oil is contaminated.

MATERIALS (2021)

Article Materials Science, Coatings & Films

Effective corrosion protection of aluminum alloy AA2024-T3 with novel thin nanostructured oxide coating

Maido Merisalu et al.

Summary: This study demonstrates effective corrosion protection on an Al-alloy AA2024-T3 through a thin ceramic coating. The coating, prepared through a two-step process, includes a chemically homogeneous base layer and a chemically resistant Al2O3/TiO2 nanolaminate. The coating shows strong corrosion resistance after extensive testing, including long-term immersion in a salt solution.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Chemistry, Physical

Structure and Properties of TiO2/nanoTiO2 Bimodal Coatings Obtained by a Hybrid PVD/ALD Method on 316L Steel Substrate

Marcin Staszuk et al.

Summary: This study demonstrates the synergy of magnetron sputtering and atomic layer deposition on 316L steel, showing that hybrid coatings exhibit superior electrochemical properties compared to those fabricated using only one method. Various techniques were employed to investigate the structure, morphology, tribological properties, and corrosion resistance of the materials.

MATERIALS (2021)

Article Materials Science, Coatings & Films

Improved corrosion protection of CrN hard coating on steel sealed with TiOxNy-TiN composite layers

Ji-Zhou Kong et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Structure and Tribological Properties of AlCrN plus CrCN Coating

Krzysztof Lukaszkowicz et al.

COATINGS (2020)

Article Nanoscience & Nanotechnology

Enhanced Corrosion Resistance of PVD-CrN Coatings by ALD Sealing Layers

Zhixin Wan et al.

NANOSCALE RESEARCH LETTERS (2017)

Article Nanoscience & Nanotechnology

Enhanced Corrosion Resistance of PVD-CrN Coatings by ALD Sealing Layers

Zhixin Wan et al.

NANOSCALE RESEARCH LETTERS (2017)

Article Materials Science, Multidisciplinary

INVESTIGATION STUDIES INVOLVING WEAR-RESISTANT ALD/PVD HYBRID COATINGS ON SINTERED TOOL SUBSTRATES

Marcin Staszuk et al.

MATERIALI IN TEHNOLOGIJE (2016)

Article Metallurgy & Metallurgical Engineering

THE INNOVATIVE DIRECTIONS IN DEVELOPMENT AND IMPLEMENTATIONS OF HYBRID TECHNOLOGIES IN SURFACE ENGINEERING

A. Mazurkiewicz et al.

ARCHIVES OF METALLURGY AND MATERIALS (2015)

Article Nanoscience & Nanotechnology

Sealing of Hard CrN and DLC Coatings with Atomic Layer Deposition

Emma Harkonen et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Physical

Characteristics of CrAlSiN plus DLC coating deposited by lateral rotating cathode arc PVD and PACVD process

Krzysztof Lukaszkowicz et al.

APPLIED SURFACE SCIENCE (2014)

Article Materials Science, Coatings & Films

Designing the color of AlTiN hard coating through interference effect

M. Panjan et al.

SURFACE & COATINGS TECHNOLOGY (2014)

Article Electrochemistry

Chemical and electrochemical characterization of hybrid PVD plus ALD hard coatings on tool steel

E. Marin et al.

ELECTROCHEMISTRY COMMUNICATIONS (2009)

Article Materials Science, Coatings & Films

Improvement in corrosion resistance of CrN coated stainless steel by conformal TiO2 deposition

C. X. Shan et al.

SURFACE & COATINGS TECHNOLOGY (2008)

Article Materials Science, Multidisciplinary

The influence of structure changes in the properties of TiCxOy decorative thin films

A. C. Fernandes et al.

THIN SOLID FILMS (2007)

Article Materials Science, Coatings & Films

Characterization of nanocrystalline AlTiN coatings synthesized by a cathodic-arc deposition process

Yin-Yu Chang et al.

SURFACE & COATINGS TECHNOLOGY (2007)

Article Engineering, Industrial

Structure and properties of the Ti plus Ti(C,N) coatings obtained in the PVD process on sintered high speed steel

LA Dobrzanski et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)

Article Materials Science, Coatings & Films

Improvement of hot forging manufacturing with PVD and DUPLEX coatings

B Navinsek et al.

SURFACE & COATINGS TECHNOLOGY (2001)

Article Crystallography

Anomalous effect of temperature on atomic layer deposition of titanium dioxide

J Aarik et al.

JOURNAL OF CRYSTAL GROWTH (2000)