☆ 4.7 Article

Effect of mechanical properties of CrN/CrCN coatings and uncoated 1.402 stainless steel on the evolution of degradation and surface roughness in cavitation erosion

TRIBOLOGY INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Damage causes and failure analysis of a steam turbine blade made of martensitic stainless steel after 72,000 h of working

Rivaz et al.

Summary: The harsh operating environment and extreme working conditions of steam turbine blades have led to the use of alloys with special characteristics, such as high corrosion resistance and excellent rupture strength. The presence of foreign particles and fuel impurities in the turbine environment has caused damage to the blade through erosion and corrosion mechanisms, ultimately leading to the formation of fatigue cracks and reducing the fatigue strength of the blade. Consequently, it is predicted that the reduced fatigue strength will result in a shortened service life for the blade.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Cavitation erosion mechanisms of HVOF-sprayed Ni-based cermet coatings in 3.5% NaCl environment

Navneet K. Singh et al.

Summary: This study assesses the synergic effect of cavitation erosion and corrosion on two HVOF-sprayed nickel-based cermet coatings, WC-NiCr and WC-H, on Monel K-500 substrate. It was found that WC-NiCr coating reduced the cavitation erosion losses in Monel alloy by 45% and had better corrosion results. SEM analysis revealed that the corrosive medium generated defects on the coating surface, increasing the cavitation erosion losses. WC-NiCr coating is recommended to enhance the cavitation-corrosion resistance in Monel K-500 alloy.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Behavior of the hard phases of copper alloys subjected to cavitation erosion investigated by SEM observation

Ye Tian et al.

Summary: This study investigated the cavitation erosion performance of two copper alloys in deionized water and artificial seawater, and found that different failure mechanisms occurred in different media.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Microstructure and cavitation erosion resistance of arc ion plating NiCrAlY coating on the 304L stainless steel

Zhengliang Liu et al.

Summary: The NiCrAlY coating fabricated on the 304L stainless steel substrate by arc ion plating can significantly improve the ultrasonic cavitation erosion resistance, with coatings fabricated at higher bias showing the best performance. The study also found that some micro-pores can enhance the elastic recovery ability of the coating.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Chemical

Erosion characteristics and failure mechanism of reservoir rocks under the synergistic effect of ultrasonic cavitation and micro-abrasives

Chi Peng et al.

Summary: The experiments showed that ultrasonic cavitation erosion of reservoir rocks in a solution containing SiO2 micro-abrasives can accelerate the erosion speed and extent, attributed to the synergistic effect of cavitation and micro-abrasives. During the erosion process, multiple micro-fractures and pores are generated on the rock surface, increasing the permeable channels for fluid flow.

ADVANCED POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Damage mechanisms evolution of TiN/Ti multilayer films with different modulation periods in cyclic impact conditions

Honghong Zhang et al.

Summary: The microstructural transformation of TiN/Ti multilayer films as the modulation period decreased resulted in fewer ductile Ti phases, thus affecting the impact resistance of the films.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Acoustics

Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel

Arun Rajput et al.

Summary: The study found that the cavitation erosion resistance of pearlitic steel increases with the fineness of the microstructure, with air-cooled and forced-air-cooled pearlitic steels performing better than furnace-cooled ones.

ULTRASONICS SONOCHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure, electrochemical and tribocorrosion behaviors of CrCN nanocomposite coating with various carbon content

Xing Xu et al.

Summary: The carbon content significantly influenced the mechanical, electrochemical, and tribocorrosion properties of CrCN coatings. The coating with 20.3% carbon content exhibited the highest hardness and elastic modulus, but the adhesion strength gradually decreased. In terms of electrochemical performance and wear resistance, the CrCN coating with 20.3% carbon content showed the best properties.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Numerical Investigation of Degradation of 316L Steel Caused by Cavitation

Artur Maurin

Summary: The degradation of 316L stainless steel caused by cavitation was investigated using finite element analysis. The study found that hydrodynamic cavitation resulted in uneven distribution of erosion over the specimen surface, validated by a decrease in erosion rate over time. Furthermore, a numerical simulation demonstrated that impact from water micro-jet exceeded the steel's tensile strength, producing impact pits with subsequent micro-jet impacts only marginally deepening the pits due to elastoplastic surface hardening.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

An integrative approach to coating/carbide substrate design of CVD and PVD coated cutting tools during the machining of austenitic stainless steel

Q. He et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Development and characterization of TiAlN (Ag, Cu) nanocomposite coatings deposited by DC magnetron sputtering for tribological applications

Hernan D. Mejia V et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Micro-nano multilayer structure design and solid particle erosion resistance performance of CrAlNx/CrAlN coating

Di Wang et al.

VACUUM (2020)

添加到收藏夹

Article Engineering, Mechanical

Failure analysis and damage causes of a steam turbine blade of 410 martensitic stainless steel after 165,000 h of working

A. Rivaz et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Article Chemistry, Physical

Improvement in the tribocorrosion performance of CrCN coating by multilayered design for marine protective application

Yongxin Wang et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and cavitation erosion behavior of sputtered NiCrAlTi coatings with and without N incorporations

Zhengliang Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Resistance of PVD Coatings to Erosive and Wear Processes: A Review

Alicja Krella

COATINGS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Wear Resistance and Titanium Adhesion of Cathodic Arc Deposited Multi-Component Coatings for Carbide End Mills at the Trochoidal Milling of Titanium Alloy

Marina A. Volosova et al.

TECHNOLOGIES (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effect of sub-layer temperature during HFCVD process on morphology and corrosion behavior of tungsten carbide coating

Seyyed Hashem Mousavi Anijdan et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cavitation Erosion and Sliding Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate

Miroslaw Szala et al.

COATINGS (2019)

添加到收藏夹

Article Chemistry, Physical

Cavitation erosion performance of CrAlYN/CrN nanoscale multilayer coatings deposited on Ti6Al4V by HIPIMS

D. Ma et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Engineering, Mechanical

Tribological properties of nanostructured TiAlN/W2N multilayer coating produced by PVD

Xing Xu et al.

WEAR (2019)

添加到收藏夹

Article Engineering, Chemical

Cavitation Erosion Behavior of 316L Stainless Steel

Guiyan Gao et al.

TRIBOLOGY LETTERS (2019)

添加到收藏夹

Article Engineering, Mechanical

Erosive wear behavior of Ti/Ti(V,Zr)N multilayered PVD coatings for Ti-6Al-4V alloy

Konstantin S. Selivanov et al.

WEAR (2019)

添加到收藏夹

Article Materials Science, Ceramics

Towards a High Strength Ductile Ni/Ni3Al/Ni Multilayer Composite using Spark Plasma Sintering

P. Mardiha et al.

SCIENCE OF SINTERING (2019)

添加到收藏夹

Article Materials Science, Ceramics

The effect of substrate temperature on microstructural evolution and hardenability of tungsten carbide coating in hot filament chemical vapor deposition

Masoud Sabzi et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Physical

Sintering variables optimization, microstructural evolution and physical properties enhancement of nano-WC ceramics

M. Sabzi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Enhancement of toughness and wear resistance by CrN/CrCN multilayered coatings for wood processing

Ying Kong et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of Cavitation Erosion Behavior of Commercial Steel Grades Used in the Design of Fluid Machinery

I. Tzanakis et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

添加到收藏夹

Article Engineering, Mechanical

Cavitation erosion of CrN/CrCN multilayer

A. K. Krella et al.

WEAR (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Composite cavitation resistant PVD coatings based on NiTi thin films

Soroush Momeni et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Mechanics

Monolayer TiAlN and multilayer TiAlN/CrN PVD coatings as surface modifiers to mitigate fretting fatigue of AISI P20 steel

R. N. Ibrahim et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Engineering, Mechanical

An analysis on tribological performance of CrCN coatings with different carbon contents in seawater

Yuwei Ye et al.

TRIBOLOGY INTERNATIONAL (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structural, mechanical, and sand erosion properties of TiN/Zr/ZrN multilayer coatings

Songsheng Lin et al.

VACUUM (2015)

添加到收藏夹

Article Engineering, Mechanical

Tribological properties of CrCN/CrN multilayer coatings

A. Gilewicz et al.

TRIBOLOGY INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Cavitation erosion resistance of Ti/TiN multilayer coatings

Alicja K. Krella

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Erosion wear of CrN, TiN, CrAlN, and TiAlN PVD nitride coatings

Deng Jianxin et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of nanostructure multilayer CrN/Cr coatings on titanium alloy

Piotr Wiecinski et al.

THIN SOLID FILMS (2011)

添加到收藏夹

Article Materials Science, Coatings & Films

Cavitation erosion behavior of nanocomposite Ti-Si-C-N and Ti/Ti-Si-C-N coatings deposited on 2Cr13 stainless steel using a Plasma Enhanced Magnetron Sputtering process

C. P. Qin et al.

SURFACE & COATINGS TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Mechanical

Revision of cavitation erosion database and analysis of stainless steel data

Shuji Hattori et al.

WEAR (2010)

添加到收藏夹

Article Materials Science, Coatings & Films

The influence of TiN coatings properties on cavitation erosion resistance

Alicja Krella

SURFACE & COATINGS TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Mechanical

Cavitation resistance of Cr-N coatings deposited on austenitic stainless steel at various temperatures

Alicja Krella et al.

WEAR (2009)

添加到收藏夹

Article Engineering, Mechanical

Cavitation erosion resistance of NiTi thin films produced by Filtered Arc Deposition

L. M. Yang et al.

WEAR (2009)

添加到收藏夹

Article Engineering, Mechanical

Cavitation erosion-corrosion behaviour of CrMnB stainless overlay and 0Cr13Ni5Mo stainless steel in 0.5 M NaCl and 0.5 M HCL solutions

Y. G. Zheng et al.

TRIBOLOGY INTERNATIONAL (2008)

添加到收藏夹

Article Materials Science, Coatings & Films

Improvement of the slurry erosion resistance of an austenitic stainless steel with combinations of surface treatments:: Nitriding and TiN coating

Abel Andre C. Recco et al.

SURFACE & COATINGS TECHNOLOGY (2007)

添加到收藏夹

Article Engineering, Industrial

Comparative studies on microstructure and mechanical properties of CrN, Cr-C-N and Cr-Mo-N coatings

Eun Young Choi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of tungsten on erosion-corrosion behavior of high chromium white cast iron

S. H. Mousavi Anijdan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Contact deformation of TiN coatings on metallic substrates

V. Jayaram et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Materials Science, Coatings & Films

Influence of plasma nitriding and PAPVD Cr1-xNx coating on the cavitation erosion resistance of an AISI 1045 steel

C Godoy et al.

SURFACE & COATINGS TECHNOLOGY (2006)

添加到收藏夹

Article Materials Science, Coatings & Films

Structural and mechanical properties of nanolayered TiAlN/CrN coatings synthesized by a cathodic arc deposition process

YY Chang et al.

SURFACE & COATINGS TECHNOLOGY (2005)

添加到收藏夹

Article Acoustics

Evolution of surface roughness of some metallic materials in cavitation erosion

KY Chiu et al.

ULTRASONICS (2005)

添加到收藏夹

Article Engineering, Chemical

Estimation of incubation time of cavitation erosion for various cavitating conditions

H Soyama et al.

TRIBOLOGY LETTERS (2004)

添加到收藏夹

Article Engineering, Mechanical

Construction of database on cavitation erosion and analyses of carbon steel data

S Hattori et al.

WEAR (2004)

添加到收藏夹

Article Engineering, Industrial

Effect of ductile layers in mechanical behaviour of TiAlN thin coatings

JM Castanho et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

添加到收藏夹

Article Engineering, Mechanical

Cavitation erosion behavior of Cr-Mn-N stainless steels in. comparison with 0Cr13Ni5Mo stainless steel

W Liu et al.

WEAR (2003)

添加到收藏夹

Article Chemistry, Physical

Effect of deposition parameters on composition, structures, density and topography of CrN films deposited by r.f. magnetron sputtering

JH Xu et al.

APPLIED SURFACE SCIENCE (2002)

添加到收藏夹

Article Engineering, Mechanical

An experimental study to corelate water jet impingement erosion resistance and properties of metallic materials and coatings

BS Mann et al.

WEAR (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure-property relationships in arc-evaporated Cr-N coatings

M Odén et al.

THIN SOLID FILMS (2000)

添加到收藏夹

Article Engineering, Mechanical

On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour

A Leyland et al.

WEAR (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.