☆ 4.7 Article

Estimating the real contact area in lubricated hot rolling of aluminium

TRIBOLOGY INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Numerical study of advanced friction modelling for sheet metal forming: Influence of the die local roughness

Alaitz Zabala et al.

Summary: Numerical simulation of sheet metal forming processes is crucial in the industry, with the study finding that the roughness distribution of the tool has an impact on friction behavior. The use of an advanced friction model is recommended for process verification.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Industrial

The role of entrapped lubricant in asperity flattening under bulk plastic deformation

Chris Nielsen et al.

Summary: The load bearing capacity and flattened asperities due to trapped lubricant are studied using a new specimen design that allows for compression and biaxial bulk deformation. Numerical simulations confirm the experimental results and demonstrate how incomplete filling of valleys affects asperity flattening based on the asperity flank angle. Furthermore, the new specimen design enables the quantification of friction differences during bulk deformation of the subsurface material with and without trapped oil in the valleys between asperities.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

The influence of strain hardening and surface flank angles on asperity flattening under subsurface deformation at low normal pressures

Maximilian F. R. Zwicker et al.

Summary: This study characterises the flattening of model asperities under longitudinal subsurface elongation, considering various normal pressure, flank angle, and strain hardening behavior. The results show that asperity flattening increases with normal pressure, while longitudinal subsurface strain reduces the effect of longitudinal straining. Additionally, strain hardening decreases the rate of asperity flattening.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Multiscale friction model for hot sheet metal forming

Jenny Venema et al.

Summary: The study extends the application of a multiscale friction model to the hot stamping process, considering factors such as tool and sheet metal surface topography. Through calibration experiments, the model relatively accurately predicts friction and is successfully applied in finite element simulations.

FRICTION (2022)

添加到收藏夹

Article Engineering, Mechanical

Investigating the relationship of hardness and flow stress in metal forming

Andre Rudnytskyj et al.

Summary: This study aims to investigate the relationship between hardness and thermo-viscoplastic flow stress of materials used in metal forming processes. The experimental results show that there is no significant difference between bulk and surface in both 6061 and 6016 aluminum alloys. By developing a numerical model and using constitutive equations derived from compression tests, it is possible to describe the deformation at the surface level.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Modeling boundary friction of coated sheets in sheet metal forming

Meghshyam Shisode et al.

Summary: A multi-scale friction model applicable for coated sheets is developed in this study, taking into account the physical behavior of coatings and the surface topographies of sheet and tools. The model is validated through experiments on zinc coated steel sheets, demonstrating its effectiveness in predicting friction in forming processes.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Understanding the generation of wear particles in cold rolling processes

M. A. Mekicha et al.

Summary: This paper experimentally studied the influence of rolling parameters on the generation of wear particles, and proposed a multi-scale wear model to predict the amount of wear particles generated in cold rolling processes. It was found that thickness reduction and roll roughness are the dominant process parameters controlling wear particles generation in cold rolling processes. The proposed model accurately captures the trend and provides values in the same order of magnitude as the experiments in terms of the volume of wear particles generated.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Influence of the 6061 Aluminium Alloy Thermo-Viscoplastic Behaviour on the Load-Area Relation of a Contact

Andre Rudnytskyj et al.

Summary: This study uses a deterministic approach to represent appropriately shaped quadratic surfaces to analyze the contact between solids in metal-forming operations. The results show that temperature and viscoplasticity significantly affect the relationship between load and contact area, while the pile-up and sink-in regions also play crucial roles in the calculation of the real contact area.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Friction analysis during deformation of steels under hot-working conditions

Ivan Serebriakov et al.

Summary: An original multiscale friction analysis is developed to characterize the interfacial friction phenomena during hot forging contact conditions for railway wheel manufacturing. The presence of crushed and embedded oxides affects the interfacial contact conditions, transforming them from a lubricant/oxide configuration to an oxide/oxide condition and impacting the friction performance.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

Tribological investigations on aluminum alloys at different contact conditions for simulation of deep drawing processes

A. Shafiee Sabet et al.

Summary: The study investigated the relationship between friction coefficients and surface topographies of different aluminum alloys through pinon-plate tests and deep drawing simulations under various conditions. Results showed that the friction coefficients tended to decrease with increasing nominal contact pressure and sliding velocity, but increased at elevated temperatures.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Mechanical

Evolution of real area of contact due to combined normal load and sub-surface straining in sheet metal

Meghshyam Shisode et al.

Summary: Understanding asperity flattening is essential for accurate macro-scale modeling of friction and wear. In sheet metal forming processes, asperities deform and determine the real contact area, influencing friction and wear. Experimental results suggest that considering combined normal load and sub-surface straining effects is necessary for predicting the real area of contact accurately.

FRICTION (2021)

添加到收藏夹

Article Engineering, Industrial

Experimental validation of contact models for cold-rolling processes

M. A. Mekicha et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Biochemical Research Methods

SciPy 1.0: fundamental algorithms for scientific computing in Python

Pauli Virtanen et al.

NATURE METHODS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive modelling of the 6061 aluminium alloy under hot rolling conditions and large strain ranges

Andre Rudnytskyj et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Engineering, Mechanical

Effects of operation parameters of cold rolling on surface finish of aluminum

Yeau-Ren Jeng et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Mechanical

Semi-analytical contact model to determine the flattening behavior of coated sheets under normal load

M. P. Shisode et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Mechanical

Understanding the role of water-based nanolubricants in micro flexible rolling of aluminium

Mingshuai Huo et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Mechanics

A generalized mechanics theory of idealized rough surfaces under dry and liquid-mediated plastic contact conditions

S. Wang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Investigation of film formation mechanism of oil-in-water (O/W) emulsions at high speeds

He Liang et al.

TRIBOLOGY INTERNATIONAL (2017)

添加到收藏夹

Article Engineering, Mechanical

A novel model-based approach for the prediction of wear in cold rolling

Daniel Strasser et al.

WEAR (2017)

添加到收藏夹

Article Thermodynamics

Interfacial heat transfer under mixed lubrication condition for metal rolling: A theoretical calculation study

Jianqing Wu et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Engineering, Mechanical

Modelling of leakage on metal-to-metal seals

Francesc Perez-Rafols et al.

TRIBOLOGY INTERNATIONAL (2016)

添加到收藏夹

Article Engineering, Mechanical

A unified method for characterizing multiple lubrication regimes involving plastic deformation of surface asperities

Chuhan Wu et al.

TRIBOLOGY INTERNATIONAL (2016)

添加到收藏夹

Article Engineering, Mechanical

Mixture Lubrication with Emulsions in Cold Rolling

Rong-Tsong Lee et al.

TRIBOLOGY TRANSACTIONS (2016)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Rolling Technology and Theory for the Last 100 Years: The Contribution of Theory to Innovation in Strip Rolling Technology

Matsuo Ataka

ISIJ INTERNATIONAL (2015)

添加到收藏夹

Article Engineering, Industrial

High-speed rolling by hybrid-lubrication system in tandem cold rolling mills

Yukio Kimura et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Mechanical

Multi-scale friction modeling for sheet metal forming: The boundary lubrication regime

J. Hol et al.

TRIBOLOGY INTERNATIONAL (2015)

添加到收藏夹

Article Engineering, Mechanical

Multi-scale friction modeling for sheet metal forming: The mixed lubrication regime

J. Hol et al.

TRIBOLOGY INTERNATIONAL (2015)

添加到收藏夹

Review Engineering, Mechanical

Tribology in metal forming at elevated temperatures

Kuniaki Dohda et al.

FRICTION (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An integrated thermal model of hot rolling

Katrin Speicher et al.

MATHEMATICAL AND COMPUTER MODELLING OF DYNAMICAL SYSTEMS (2014)

添加到收藏夹

Article Mathematics, Applied

A novel approach to investigate surface roughness evolution in asymmetric rolling based on three dimensional real surface

H. B. Xie et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2013)

添加到收藏夹

Article Engineering, Mechanical

The lubricity of oil-in-water emulsion in cold strip rolling process under mixed lubrication

Sy-Wei Lo et al.

TRIBOLOGY INTERNATIONAL (2013)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Mayavi: 3D Visualization of Scientific Data

Prabhu Ramachandran et al.

COMPUTING IN SCIENCE & ENGINEERING (2011)

添加到收藏夹

Article Engineering, Industrial

Environmentally benign tribo-systems for metal forming

N. Bay et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Mechanical

Combined effect of friction and macroscopic deformation on asperity flattening

Przemyslaw Sadowski et al.

TRIBOLOGY INTERNATIONAL (2010)

添加到收藏夹

Article Engineering, Mechanical

A load dependent friction model for fully plastic contact conditions

Xiao Ma et al.

WEAR (2010)

添加到收藏夹

Article Engineering, Chemical

A multi-scale model for friction in cold rolling of aluminium alloy

H. R. Le et al.

TRIBOLOGY LETTERS (2006)

添加到收藏夹

Article Materials Science, Coatings & Films

Tribological contact analysis of a rigid ball sliding on a hard coated surface, Part III: Fracture toughness calculation and influence of residual stresses

A Laukkanen et al.

SURFACE & COATINGS TECHNOLOGY (2006)

添加到收藏夹

Article Engineering, Mechanical

Direct observation of asperity deformation of specimens with random rough surfaces in upsetting and indentation processes

A Azushima et al.

WEAR (2006)

添加到收藏夹

Article Physics, Fluids & Plasmas

Reexamination of Hagen-Poiseuille flow: Shape dependence of the hydraulic resistance in microchannels

NA Mortensen et al.

PHYSICAL REVIEW E (2005)

添加到收藏夹

Article Engineering, Mechanical

An elasto-plasto-hydrodynamic model of strip rolling with oil/water emulsion lubricant

AZ Szeri et al.

TRIBOLOGY INTERNATIONAL (2004)

添加到收藏夹

Article Engineering, Mechanical

High temperature tribological behaviour of lubricating emulsions

KR Januszkiewicz et al.

WEAR (2004)

添加到收藏夹

Article Engineering, Mechanical

Elastohydrodynamic film thickness and tractions for oil-in-water emulsions

HX Yang et al.

TRIBOLOGY TRANSACTIONS (2004)

添加到收藏夹

Article Engineering, Industrial

Modeling of the inlet zone in the mixed lubrication situation of cold strip rolling

C Lu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

添加到收藏夹

Article Engineering, Mechanical

Lubricant capture during hot rolling of an aluminum alloy©

A Shirizly et al.

TRIBOLOGY TRANSACTIONS (2002)

添加到收藏夹

Article Engineering, Mechanical

Influence of workpiece surface topography on the mechanisms of liquid lubrication in strip drawing

I Shimizu et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2001)

添加到收藏夹

Article Engineering, Mechanical

A semi-empirical friction model for cold metal rolling

HR Le et al.

TRIBOLOGY TRANSACTIONS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.