☆ 4.7 Article

Design of sheathed built-up nested CFS channel studs in load-bearing LSF walls

THIN-WALLED STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

DSM design of fixed-ended slender built-up back-to-back cold-formed steel compression members

Son Tung Vy et al.

Summary: This study focuses on slender BC members with fixed ends, which are sensitive to local-global interaction or global buckling. Many tests of fixed-ended slender channel and BC compression members, which failed mostly by local-global interaction buckling, were conducted first, followed by developing validated finite element models. The outcomes from tests and finite element analyses provided improved understanding of the behaviour of BC members and were used to compare their compression capacities against twice the individual member capacities, showing the limitations of the current design equations available in the standards and research publications. Finally, reliable design guidelines were proposed using the Direct Strength Method (DSM).

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical investigation on cold-formed steel built-up section pin-ended columns

Qiu-Yun Li et al.

Summary: This study investigated the buckling behavior and loading capacity of cold-formed steel (CFS) built-up section members under axial compression through a thorough test program and numerical simulation. The results showed that the current design rules for CFS built-up section members were generally conservative and scattered in predicting resistance, leading to proposed modifications of the codified DSM equations for more reliable strength predictions.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Design of cold-formed steel wall studs subject to non-uniform elevated temperature distributions

M. Rokilan et al.

Summary: This paper first investigates the accuracy of the current design rules for cold-formed steel studs in wall systems subject to non-uniform elevated temperature distributions, and then simplifies the calculation process without compromising accuracy. It also improves the accuracy of the current design equations. The paper then explores the possibilities of using uniform temperature based design equations for non-uniform temperature distributions and proposes a simplified design method.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Built-up back-to-back cold-formed steel compression members failing by local and distortional buckling

Son Tung Vy et al.

Summary: This research focuses on the compression behavior and capacity of built-up back-to-back CFS channel sections, examining the effects of screw fastener characteristics and arrangements. It proposes a simple DSM-based design method after conducting compression tests, developing finite element models, and conducting a parametric study. The study aims to improve the accuracy of current design equations and provide recommendations for CFS design standards.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Local in-plane strength and stiffness of stud-to-sheathing fastener connections in LSF wall panels

Tharindu Abeysiriwardena et al.

Summary: Experimental study was conducted to investigate the non-linear local in-plane strength and stiffness of screw-fastened stud-to-gypsum plasterboard sheathing connections by varying a range of parameters affecting their stiffness and capacities. The resulting load-displacement curves were analysed, and models of characteristic curves were developed. Finite element model and analytical model were then developed to determine the local in-plane response and initial stiffness of stud-to-sheathing screw fastener connections, and were validated using experimental results.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Behaviour and design of slender built-up nested cold-formed steel compression members

Son Tung Vy et al.

Summary: This research aims to provide design guidelines for NC compression members commonly used in Australian buildings, by conducting tests and finite element analysis on these members failing in global or local-global interaction buckling, and proposing a simple and reliable design method based on the Direct Strength Method in current design standards.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Built-up nested cold-formed steel compression members subject to local or distortional buckling

Son Tung Vy et al.

Summary: This research investigated the behavior and capacity of nested CFS channel compression members, carrying out experimental tests, developing finite element models, and conducting a parametric study. The study concluded that the accuracy of current design standards and research papers needs further validation, and recommended a simple design method based on DSM.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

添加到收藏夹

Article Engineering, Civil

Simulation of screw connected built-up cold-formed steel back-to-back lipped channels under axial compression

Smail Kechidi et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Construction & Building Technology

Influence of cavity insulation on the fire resistance of light gauge steel framed walls

Anthony Deloge Ariyanayagam et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Civil

Full-scale fire resistance tests of steel and plasterboard sheathed web-stiffened stud walls

Yomal Dias et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Engineering, Civil

Axial compression strength of gypsum plasterboard and steel sheathed web-stiffened stud walls

Yomal Dias et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Construction & Building Technology

Experimental investigation of cold-formed steel built-up closed section columns with web stiffeners

Jia-Hui Zhang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)

添加到收藏夹

Article Engineering, Civil

Experimental study on the composite action in sheathed and bare built-up cold-formed steel columns

David C. Fratamico et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Finite element analysis and design of cold-formed steel built-up closed section columns with web stiffeners

Jia-Hui Zhang et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Numerical modelling of load bearing light gauge steel frame wall systems exposed to realistic design fires

Anthony De Loge Ariyanayagam et al.

THIN-WALLED STRUCTURES (2014)

添加到收藏夹

Article Engineering, Civil

Ultimate load-carrying capacity of cold-formed thin-walled columns with built-up box and I section under axial compression

Yuanqi Li et al.

THIN-WALLED STRUCTURES (2014)

添加到收藏夹

Article Construction & Building Technology

Behavior and Design of Sheathed Cold-Formed Steel Stud Walls under Compression

L. C. M. Vieira et al.

JOURNAL OF STRUCTURAL ENGINEERING (2013)

添加到收藏夹

Article Engineering, Civil

Experimental study of load bearing cold-formed steel wall systems under fire conditions

Shanmuganathan Gunalan et al.

THIN-WALLED STRUCTURES (2013)

添加到收藏夹

Article Construction & Building Technology

Design of cold-formed steel built-up closed sections with intermediate stiffeners

Ben Young et al.

JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2008)

添加到收藏夹

Article Construction & Building Technology

Behavior of cold-formed steel plain angle columns

E Ellobody et al.

JOURNAL OF STRUCTURAL ENGINEERING (2005)

添加到收藏夹

Article Engineering, Civil

Behaviour and design of cold-formed steel wall frames lined with plasterboard on both sides

Y Telue et al.

ENGINEERING STRUCTURES (2004)

添加到收藏夹

Article Construction & Building Technology

Numerical modeling of stainless steel structural components - A consistent approach

L Gardner et al.

JOURNAL OF STRUCTURAL ENGINEERING (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.