☆ 4.7 Article

Low-velocity impact response of aluminum alloy corrugated sandwich beams used for high-speed trains

THIN-WALLED STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Transportation Science & Technology

Coupling effects of strain rate and fatigue damage on wheel-rail contact behaviour: a dynamic finite element simulation

Xiongfei Zhou et al.

Summary: In this study, a comprehensive 3-D explicit finite element model was established to investigate the frictional wheel-rail rolling contact responses. The strain rate effect and initial fatigue damage of wheel/rail materials were considered, and four friction exploitation levels were included to examine the dynamic contact responses.

INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION (2023)

添加到收藏夹

Article Engineering, Civil

Dynamic response of multilayer curved aluminum honeycomb sandwich beams under low-velocity impact

Jianxun Zhang et al.

Summary: This paper investigates the dynamic response of multilayer curved aluminum honeycomb sandwich beams under low-velocity impact. The deformation process and final failure modes are observed and analyzed. Numerical calculations are performed and show good agreement with experimental results. The effects of core thickness, core-thickness gradient, and gradient of inscribed circle diameters on the load-carrying capacity and energy absorption of multilayer curved aluminum honeycomb sandwich beams are explored. The results suggest that adjusting the core thickness and curvature angle can effectively improve the energy absorption capacity and mitigation ability.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Strain-rate dependent tensile behavior of railway wheel/rail steels with equivalent fatigue damage: Experiment and constitutive modeling

Lin Jing et al.

Summary: This study investigates the dynamic constitutive relationship of railway wheel/rail steels and develops a modified JC model to describe the plastic flow behavior of the materials with initial fatigue damage.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Crashworthiness of bamboo-inspired circular tubes used for the energy absorber of rail vehicles

Kai Liu et al.

Summary: A new type of thin-walled circular tube (BT) inspired by bamboo was proposed and designed for potential application as an energy absorber in rail vehicles. Experimental and numerical investigations were conducted to study the axial crushing behavior and crashworthiness of BT, compared with single CT and foam-filled tube (FT). The results showed that BT exhibited the best load-carrying capability, energy absorption, and crashworthiness among the three types of tubes, with an increase of 93.1% in EA value and an increase from 74.2 kN to 143.4 kN in F-m value compared to CT specimens.

ACTA MECHANICA SINICA (2022)

添加到收藏夹

Article Engineering, Civil

Behaviour of continuous fibre composite sandwich core under low-velocity impact

Sartip Zangana et al.

Summary: The study found that increasing core thickness improved impact capacity, while increasing core height decreased sandwich strength. Finite element analysis simulated the damage status and mechanism of the novel composite core sandwich. The multi-cell composite corrugated core increased impact capacity, and the trapezoidal composite corrugated sandwich core showed higher specific strength compared to traditional honeycomb, truss, and foam cores.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Failure analysis of bio-inspired corrugated sandwich structures fabricated by laser powder bed fusion under three-point bending

Liang Meng et al.

Summary: The study investigated the failure mechanisms and processes of bio-inspired corrugated sandwich structures (BCSS) manufactured by laser powder bed fusion (LPBF) under three-point bending using theoretical derivation, experimental, and finite element method (FEM). The results showed that panel buckling is the dominant failure mode, while panel yielding or core buckling is the fatal failure mode for structures whose initial failure mode is panel buckling. Furthermore, the experimental and FEM results were in good agreement with analytical predictions.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Experimental study on laminated glass responses of high-speed trains subject to windblown sand particles loading

Gongxun Deng et al.

Summary: The study found that sand impact loading was the main cause of laminated glass damage. Mixed-mode crack initiation and propagation were driven by reflected tensile waves and Rayleigh surface waves under sandstone impacts. Statistical analysis showed that the size of sandstone and impact angle were sensitive to scratch velocity in sand particle impacts.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Review Engineering, Mechanical

Impact vibration behavior of railway vehicles: a state-of-the-art overview

Lin Jing et al.

Summary: This paper provides a comprehensive overview of recent studies on the impact vibration behavior of railway vehicles, categorizing sources of impact excitations, introducing research approaches of vehicle impact vibration, and examining impact vibration response characteristics. The results show that excessive vibrations of railway vehicles induced by dynamic impact loadings have a significant impact on train operating safety and stability, which are difficult to eliminate due to the complexity and diversity of railway lines and service environment.

ACTA MECHANICA SINICA (2021)

添加到收藏夹

Article Mechanics

Investigating the feasibility of a new testing method for GFRP/polymer foam sandwich composites used in railway passenger vehicles

Asim Onder et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Composites

Post-impact flexural collapse modes of composite sandwich structures in Arctic conditions: Analytical prediction and experimental validation

M. H. Khan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Civil

Deflection analysis of clamped square sandwich panels with layered-gradient foam cores under blast loading

Xiongfei Zhou et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical study of sandwich beams with layered-gradient foam cores under low-velocity impact

Lin Jing et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Thermodynamics

Numerical Investigation of the Effects of Sand Collision on the Aerodynamic Behaviour of a High-Speed Train Subjected to Yaw Angles

J. Wang et al.

JOURNAL OF APPLIED FLUID MECHANICS (2019)

添加到收藏夹

Article Engineering, Mechanical

Low-velocity impact response of sandwich beams with a metal foam core: Experimental and theoretical investigations

Xiang Chunping et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Mechanics

Failure analysis of adhesively bonded steel corrugated sandwich structures under three-point bending

Ye Yu et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Response of aluminum corrugated sandwich panels under foam projectile impact - Experiment and numerical simulation

Xin Li et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2017)

添加到收藏夹

Article Engineering, Mechanical

A novel design for reinforcing the aircraft tail leading edge structure against bird strike

Jun Liu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

The effect of impactor shape on the low-velocity impact behavior of hybrid corrugated core sandwich structures

Jingxi Liu et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Mechanical

The low velocity impact response of curvilinear-core sandwich structures

T. Boonkong et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

添加到收藏夹

Article Engineering, Mechanical

Impact strength enhancement of aluminum tetrahedral lattice truss core structures

Jiagui Liu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)

添加到收藏夹

Article Engineering, Mechanical

The low velocity impact response of sandwich beams with a corrugated core or a Y-frame core

L. St-Pierre et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

添加到收藏夹

Article Engineering, Civil

Ballast flight under high-speed trains: Wind tunnel full-scale experimental tests

A. Premoli et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2015)

添加到收藏夹

Article Engineering, Mechanical

Experimental study on fatigue failure and damage of sandwich structure with PMI foam core

F. P. Yang et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive model

Jun Wang et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Mechanics

Dynamic behavior of aluminum honeycomb sandwich panels under air blast: Experiment and numerical analysis

Xin Li et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Engineering, Mechanical

Response of aluminium corrugated sandwich panels under air blast loadings: Experiment and numerical simulation

Xin Li et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

An experimental study of the dynamic response of cylindrical sandwich shells with metallic foam cores subjected to blast loading

Lin Jing et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

The mechanical behaviour of corrugated-core sandwich panels

M. R. M. Rejab et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Engineering, Mechanical

Failure of AA 6061 and 2099 aluminum alloys under dynamic shock loading

A. G. Odeshi et al.

ENGINEERING FAILURE ANALYSIS (2013)

添加到收藏夹

Article Engineering, Mechanical

Impact response of aluminum corrugated core sandwich panels

H. N. G. Wadley et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

The dynamic and quasi-static mechanical response of three aluminum armor alloys: 5059, 5083 and 7039

Sara J. Perez-Bergquist et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Engineering, Mechanical

Split Hopkinson pressure bar multiple reloading and modeling of a 316 L stainless steel metallic hollow sphere structure

A. Tasdemirci et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

添加到收藏夹

Article Engineering, Mechanical

Theoretical method for predicting the weight reduction rate of a box-type car body for rolling stock by material substitution design

J. S. Koo et al.

INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Mechanical

The dynamic response of end-clamped sandwich beams with a Y-frame or corrugated core

V. Rubino et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)

添加到收藏夹

Article Materials Science, Composites

Impact damage resistance and tolerance of honeycomb core sandwich panels

K. S. Raju et al.

JOURNAL OF COMPOSITE MATERIALS (2008)

添加到收藏夹

Article Mechanics

Dynamic crushing of sandwich panels with prismatic lattice cores

M. T. Tilbrook et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

添加到收藏夹

Article Engineering, Mechanical

The response of clamped sandwich beams subjected to shock loading

DD Radford et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2006)

添加到收藏夹

Article Engineering, Mechanical

An experimental study on the behaviour under impact loading of metallic cellular materials

H Zhao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2005)

添加到收藏夹

Article Mechanics

Material characterization of a composite-foam sandwich for the front structure of a high speed train

G Belingardi et al.

COMPOSITE STRUCTURES (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimal design of a flexural actuator

TJ Lu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.