☆ 4.7 Article

Damage evolution of concrete under tensile load using discrete element modeling

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mathematics, Interdisciplinary Applications

Flexural strength test and meso-mechanical evolution behavior of cement concrete based on discrete element method

Zhanyou Yan et al.

Summary: This study obtained microscopic parameters for the discrete element model through compressive tests of concrete mixture cubes, and established a three-dimensional discrete element model of cement mixture. The analysis of meso-fracture behavior showed that the discrete element method can effectively simulate the mechanical behavior of discontinuous and heterogeneous materials in cement mixture.

COMPUTATIONAL PARTICLE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Concrete failure simulation method based on discrete element method

Pingming Huang et al.

Summary: This paper improves the method of efficiently calibrating the meso-parameters considering concrete aggregate gradation and conducts numerical simulations of four-point bending strength test and direct shear strength test on concrete beams. The results show that the DEM numerical model can accurately represent the mechanical properties of concrete and provide insights into its failure mechanism. The numerical model demonstrates the heterogeneity of concrete through random distribution of particles and defines the contact model between particles with a parallel bond model (PBM). The crack propagation and load-displacement curves of concrete beams under different tests are also analyzed.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Mechanics

Investigation into the damage mechanism of concrete in the Brazilian test and flattened Brazilian test through the moment tensor

Huilan Ren et al.

Summary: The acoustic emission technique and moment tensor inversion were used to study and quantify the damage evolution process and intensity of microcracks in Brazilian and flattened Brazilian concrete tests. The results showed that microcracks gradually propagate from the zones between the loading points and center to the center and loading points in the Brazilian test. In the flattened Brazilian test, the initiation positions of microcracks were random and crack accumulation occurred near the center of the specimen when the first peak load was reached.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Construction & Building Technology

Mesoscale investigation on concrete creep behaviors based on discrete element method

Gang Ma et al.

Summary: By combining discrete element method (DEM) and Burgers model, this study analyzes the creep characteristics of concrete. The simulation results show that the Burgers model effectively reflects the creep behavior of concrete and reveals phenomena such as decreasing porosity, decreasing creep contribution from interfacial transition zone (ITZ), and regular directional distribution of force-chain strength.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

Numerical insights into the effect of ITZ and aggregate strength on concrete properties

Haiyang Zhao et al.

Summary: The mechanical properties of concrete are greatly influenced by its components, especially the aggregate and interfacial transition zone (ITZ). This paper investigates the effects of coarse aggregate and ITZ strength on the mechanical and fracture behaviors of concrete through mesoscale investigation using discrete element modeling. The results show that the elastic modulus of concrete is not sensitive to the strength of ITZ and aggregate, while compressive strength and strain-to-damage greatly depend on these factors. An increase in ITZ/aggregate strength leads to a decrease in cracks in ITZ/aggregates and little change in cracks in mortar. Under certain conditions, aggregate size can alter the crack growth process and result in distinct crack patterns.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Construction & Building Technology

Random generation of convex aggregates for DEM study of particle shape effect

Xiang Wang et al.

Summary: This study presents a method for the random generation of 3D convex aggregates for DEM simulation to investigate the particle shape effect. The algorithm utilizes Bezier curve fitting and Gregory surface interpolation to create solid surfaces within randomly generated polyhedrons. DEM simulations are conducted to study the impact of particle roundness on the shear behavior of granular aggregates.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Peridynamics modeling and simulation of meso-scale fracture in recycled coarse aggregate (RCA) concretes

Chunxiang Shi et al.

Summary: This paper presents two non-local mechanics models of recycled coarse aggregate concrete based on Peridynamics modeling and simulation. The study investigated damage initiation, evolution, and propagation in the composite under different loading conditions, as well as the effect of aggregate replacement ratios and random microstructure distribution on interfacial fracture. The results demonstrate the potential of Peridynamics modeling as a promising technique for analyzing the progressive failure of recycled coarse aggregate concrete materials and structures.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Application of a micro-model for concrete to the simulation of crack propagation

Rong-xin Peng et al.

Summary: The PeriDynamics (PD) model can simulate crack initiation and propagation naturally with a simple bond breakage criterion. The established micro-calculation model for concrete, combined with a quasi-plastic damage fracture constitutive model, accurately describes the crack characteristics and behavior. The simulation results show that the proposed material model can better reflect the comprehensive mechanical behavior of concrete.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Construction & Building Technology

Effect of surface characteristics of aggregates on the compressive damage of high-strength concrete based on 3D discrete element method

Xiang Zhou et al.

Summary: This study investigated the influence of coarse aggregate content and surface characteristics on the compressive mechanical properties and damage evolution process of high-strength concrete using a 3D discrete element method. The simulation results showed that aggregate surface texture and volume ratio have an exponential correlation with the compressive strength of concrete and affect the proportion of tensile microcracks. Concrete with large aggregates surface texture factor has a more uniform stress distribution and wider damage range.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Study on failure mechanism of porous concrete based on acoustic emission and discrete element method

Chao Xie et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Using random heterogeneous DEM model to simulate the SCB fracture behavior of asphalt concrete

Bin Xue et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Review Mechanics

Mesoscale modelling of concrete - A review of geometry generation, placing algorithms, constitutive relations and applications

P. S. M. Thilakarathna et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Geological

Numerical investigation of rock tensile strength determined by direct tension, Brazilian and three-point bending tests

Z. Y. Liao et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

添加到收藏夹

Article Construction & Building Technology

Failure analytical model of reinforced concrete slab under impact loading

Xiangzhao Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comprehensive approach for mesoscale discrete element modelling of mechanical and fracture behavior of concrete

Ran Zhu et al.

GRANULAR MATTER (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Meso-scale analyses of size effect in brittle materials using DEM

J. Suchorzewski et al.

GRANULAR MATTER (2019)

添加到收藏夹

Article Construction & Building Technology

Numerical study of the effect of ITZ on the failure behaviour of concrete by using particle element modelling

Shengli Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Mechanics

Numerical analysis of the flattened Brazilian test: Failure process, recommended geometric parameters and loading conditions

Shunchuan Wu et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Construction & Building Technology

In-situ X-ray computed tomography characterisation of 3D fracture evolution and image-based numerical homogenisation of concrete

Z. Yang et al.

CEMENT & CONCRETE COMPOSITES (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Random aggregate model for mesoscopic structures and mechanical analysis of fully-graded concrete

Huaifa Ma et al.

COMPUTERS & STRUCTURES (2016)

添加到收藏夹

Article Mathematics, Applied

Method of meshing ITZ structure in 3D meso-level finite element analysis for concrete

Shuguang Li et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2015)

添加到收藏夹

Article Engineering, Geological

Semi-analytical and Numerical Studies on the Flattened Brazilian Splitting Test Used for Measuring the Indirect Tensile Strength of Rocks

Y. G. Huang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

添加到收藏夹

Article Construction & Building Technology

Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation

Jianzhuang Xiao et al.

CEMENT & CONCRETE COMPOSITES (2013)

添加到收藏夹

Article Construction & Building Technology

Cracking of the concrete cover due to reinforcement corrosion: A two-dimensional lattice model study

Branko Savija et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Loading rate effects on cracking behavior of flaw-contained specimens under uniaxial compression

Xiao-Ping Zhang et al.

INTERNATIONAL JOURNAL OF FRACTURE (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiscale failure modeling of concrete: Micromechanical modeling, discontinuous homogenization and parallel computations

Vinh Phu Nguyen et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling of concrete cracking-A hybrid technique of using displacement discontinuity element method and direct boundary element method

Mohammed Ameen et al.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2011)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Mesoscale modelling of concrete tensile failure mechanism at high strain rates

X. Q. Zhou et al.

COMPUTERS & STRUCTURES (2008)

添加到收藏夹

Article Engineering, Geological

The flattened Brazilian disc specimen used for determining elastic modulus, tensile strength and fracture toughness of brittle rocks: experimental results

QZ Wang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)

添加到收藏夹

Article Mechanics

3D lattice type fracture model for concrete

G Lilliu et al.

ENGINEERING FRACTURE MECHANICS (2003)

添加到收藏夹

Article Mechanics

Computational aspects of the discontinuous deformation analysis framework for modelling concrete fracture

CJ Pearce et al.

ENGINEERING FRACTURE MECHANICS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.