☆ 4.7 Review

A comprehensive review of fatigue behavior of laser shock peened metallic materials

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

The effects of surface pits and intermetallics on the competing failure modes in laser shock peened AA7075-T651: Experiments and modelling

C. You et al.

Summary: The study revealed that critical surface imperfections significantly reduce the benefits of laser shock peening in improving fatigue life. A finite element model can be used to simulate residual stress distribution induced by LSP and its redistribution caused by the formation of surface pits.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects and optimization of biomimetic laser shock peening on residual fatigue life improvement of aluminum alloy used in aircraft skin

Minjie Song et al.

Summary: This study investigates the effects of biomimetic laser shock peening on crack resistance ability of aluminum alloy aircraft skin. Results show that the treatment contributes to leaf-shaped residual stress distribution, reducing stress intensity factors and increasing residual fatigue life. An ANN linked with MCM is established to predict optimal structure with low relative error, saving design time and computation resource.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Optics

Effect of laser shock peening on fatigue properties of U75VG rail flash-butt welding joints

Xiaoya Li et al.

Summary: This study examines the effect of laser shock peening (LSP) treatment on the bending fatigue performance of rail-welded joints. It was found that LSP treatment increases the fatigue life of the joints and enhances resistance to fatigue crack growth.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of residual stress induced by laser shock peening on mixed-mode crack propagation behavior in 7075-T6 aluminum alloy panel

Xiushuo Zhang et al.

Summary: The study investigated the effects of residual stress on mixed-mode crack propagation behavior of 7075-T6 aluminum alloy panel subject to multiple laser shock peening (LSP) impacts. It was found that residual stress can change the crack path and delay the crack propagation. Additionally, increasing the LSP coverage area and reducing the distance from the treated area to the crack tip can improve fatigue performance.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of biaxial residual stress components on mixed-mode fatigue crack propagation behavior in friction stir welded 7075-T6 aluminium alloy panel

Xiushuo Zhang et al.

Summary: Residual stress significantly affects fatigue performance in friction stir weld (FSW) joints. This study investigates the effect of biaxial residual stress components on mixed-mode crack propagation behavior in FSWed 7075-T6 fuselage panel through experiments and numerical simulations.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Chemistry, Physical

Life cycle strengthening of high-strength steels by nanosecond laser shock

Yongtao Bai et al.

Summary: Nanosecond laser shock peening improves the life cycle performance of high-strength steel by inducing higher microhardness, corrosion resistance, and fatigue life through microstructures formation. Additionally, compressive residual stress can be found in the treated area to enhance the material properties.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Engineering, Mechanical

The effect of residual stress on mixed-mode crack propagation behaviour in friction stir welded 7075-T6 aluminium alloy panel under biaxial loading

Xiushuo Zhang et al.

Summary: Residual stress has a considerable effect on mixed-mode crack propagation behavior under biaxial loading conditions, especially influencing crack deviation in the early stage of propagation. The variation of crack path is strongly linked with residual stress and biaxial loading ratio.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Fatigue performance of laser shock peened Ti6Al4V and Al6061-T6 alloys

N. Maharjan et al.

Summary: The propagation of fatigue crack in laser shock peened metallic components is delayed by the introduction of deep compressive residual stresses. The study investigates the effects of laser shock peening on near-surface properties of Ti6Al4V and Al6061-T6 alloys and how these changes influence overall fatigue performance. It is found that both surface residual stresses and surface topography significantly impact the fatigue life of a component.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Experimental and analytical investigation of the effects of laser shock peening processing strategy on fatigue crack growth in thin 2024 aluminium alloy panels

D. C. van Aswegen et al.

Summary: This paper focuses on the application of Laser Shock Peening (LSP) process to retard fatigue cracks in thin metallic airframe structural panels by creating compressive residual stress fields. Experimental results show that the best configuration, a 15 mm wide LSP region with a 15 mm offset from the crack tip, yielded a fatigue life of more than 6 times the baseline value.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Engineering, Mechanical

On the prediction of fatigue crack growth based on weight functions in residual stress fields induced by laser shock peening and laser heating

Nikolai Kashaev et al.

Summary: This study predicts fatigue crack growth in thin sheet AA2024 specimens with residual stresses introduced through laser shock peening and laser heating treatments. The research concludes that weight functions are a powerful tool in predicting fatigue crack growth, as long as the loading direction gradient is moderate.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

The effect of laser shock peening, shot peening and their combination on the microstructure and fatigue properties of Ti-6Al-4V titanium alloy

Xuekun Luo et al.

Summary: The fatigue life of Ti-6Al-4V titanium alloy can be significantly improved by integrating laser shock peening and shot peening, mainly through enhancing the distribution of compressive residual stress and dislocation-gradient microstructure.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Mechanics

Effects of residual stress and surface roughness on the fatigue life of nickel aluminium bronze alloy under laser shock peening

Yi Gao et al.

Summary: The surface properties of alloy materials have a significant influence on overall strength and fatigue properties. Laser shock peening (LSP) can improve the surface properties of nickel aluminium bronze (NAB) alloy, resulting in enhanced high-cycle fatigue life. The improvement in fatigue properties is mainly attributed to the residual compressive stress and surface roughness induced by LSP.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Effects of laser shock peening on the mechanisms of fatigue short crack initiation and propagation of AA7075-T651

A. G. Sanchez et al.

Summary: Laser shock peening treatment on AA7075-T651 alloy resulted in significant fatigue life improvement. Surface and microstructural characterization techniques revealed the crucial role of deep compressive residual stresses generated by LSP in extending fatigue life. The study also emphasized the impact of changing crack initiation mechanisms on overall material life improvement.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Optics

Improving the fatigue limit and rendering a defect harmless by laser peening for a high strength steel welded joint

Ryutaro Fueki et al.

Summary: The research found that laser peening significantly improves the fatigue strength and reliability of high strength steel welded joints. Even defects of limited depth can be rendered harmless through LP treatment. The key factor contributing to the improvement in fatigue limit is the introduction of compressive residual stress by LP.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Fatigue performance improvement of laser shock peened hole on powder metallurgy Ni-based superalloy labyrinth disc

Xinlei Pan et al.

Summary: The study shows that laser shock peening technology plays an important role in improving the fatigue resistance of holes, increasing the fatigue limit through the generation of high amplitude compressive residual stress and microhardness, grain refinement, and removal of inclusions. This method is general and flexible, with potential applications to a wide range of engineering components with hole structures.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

High-cycle bending fatigue behavior of TC6 titanium alloy subjected to laser shock peening assisted by cryogenic temperature

Jing Li et al.

Summary: The coupling strengthening process of cryogenic laser shock peening (CLSP) proposed in this study effectively improved the high-cycle bending fatigue (HCBF) life of aeroengine blades by introducing higher-density of dislocation and deformation twins, increasing surface compressive residual stress, and enhancing damping ratio and fatigue life compared to room temperature laser shock peening (RT-LSP) method.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of laser shock peening on microstructure and fatigue properties of thin-wall welded Ti-6Al-4V alloy

Xiaosong Shi et al.

Summary: This study investigated the use of laser shock peening to improve the high cycle fatigue performance of thin-wall welded Ti-6Al-4V alloys. The results showed that laser shock peening can enhance the fatigue strength of the alloy, as well as improve residual stress distribution and grain structure.

VACUUM (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent Developments and Novel Applications of Laser Shock Peening: A Review

Chaoyi Zhang et al.

Summary: Laser shock peening (LSP) enhances fatigue performance of metallic components by inducing work hardening and beneficial compressive residual stresses, with applications in emerging fields and innovative process development. This comprehensive review covers the history, mechanisms, effects, and recent developments in LSP.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Article Mechanics

Phase-field modelling for fatigue crack growth under laser shock peening-induced residual stresses

Martha Seiler et al.

Summary: The paper focuses on the application of the phase-field fatigue model in estimating the fatigue life of thin-walled components and the influence of residual stresses on crack growth. By calibrating and comparing the predictions with fatigue crack growth experiments on aluminum sheet material, the study confirms the accuracy of the model. Additionally, the research shows that residual stresses can affect crack growth rate by retarding or accelerating the crack, and a strategy to incorporate residual stresses in the phase-field fatigue model is proposed and tested.

ARCHIVE OF APPLIED MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Experimental-numerical study of laser-shock-peening-induced retardation of fatigue crack propagation in Ti-17 titanium alloy

Rujian Sun et al.

Summary: The study demonstrates that residual stresses induced by laser shock peening play a significant role in inhibiting fatigue crack propagation, with significant retardation observed under high residual stresses, small peening gap distances, and lower externally applied loads. This is mainly attributed to crack closure, as opposed to other microstructural influences.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effects of shot peening, laser shock peening and ultrasonic nanocrystal surface modification on the fatigue strength of Inconel 718

Erfan Maleki et al.

Summary: Using different surface treatment techniques can effectively improve the material performance and lifetime of nickel-based super-alloy Inconel 718. Increasing the kinetic energy of the surface treatments can promote grain refinement and induce deep compressive residual stress, thus enhancing fatigue performance. Ultrasonic nanocrystal surface modification is the most efficient surface treatment method.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser shock peening on high cycle fatigue properties of aluminized AISI 321 stainless steel

Wei Li et al.

Summary: The enhanced fatigue property of aluminized stainless steel was achieved by the high fraction twinning and compressive residual stress induced by LSP treatment, with detwinning conspicuously noticed in LSP samples and dynamic recovery only observed at the severe plastic deformation layer during cyclic deformation related to CRS.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Engineering, Mechanical

Improving high cycle fatigue performance of gas tungsten arc welded Ti6Al4V titanium alloy by warm laser shock peening

Xiaotai Feng et al.

Summary: The study successfully applied warm laser shock peening (WLSP) technology as a post weld treatment to significantly increase the resistance of welded components to vibration failure. The high cycle vibration fatigue limit was improved by 42.3% through the introduction of high amplitude compressive residual stress, high stability of compressive residual stress, and surface nanostructure induced by WLSP.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Optics

The effect of rolling contact fatigue properties on 316 stainless steel under laser shock peening

Fengze Dai et al.

Summary: After treatment with laser shock peening technology, the rolling contact fatigue performance of 316 stainless steel has been significantly improved, mainly due to the induction of high amplitude compressive residual stress on the surface layer. In addition, the treated 316 stainless steel is sensitive to contact stress.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Effects of laser peening on the fatigue strength and defect tolerance of aluminum alloy

Koji Takahashi et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

An experimental study on crack closure induced by laser peening in pre-cracked aluminum alloy 2024-T351 and fatigue life extension

Yongxiang Hu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser peening with different power densities on vibration fatigue resistance of hydrogenated TC4 titanium alloy

Shu Huang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Mechanical

Finite element and experimental analysis of elevated-temperature fatigue behavior of IN718 alloy subjected to laser peening

Shu Huang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Optics

Effects of laser shock processing and shot peening on 253 MA austenitic stainless steel and their consequences on fatigue properties

L. Spadaro et al.

OPTICS AND LASER TECHNOLOGY (2020)

添加到收藏夹

Article Optics

Fatigue behavior of double-sided laser shock peened Ti-6Al-4V thin blade subjected to foreign object damage

Xudong Ren et al.

OPTICS AND LASER TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Fatigue behavior of Ti-17 titanium alloy subjected to different laser shock peened regions and its microstructural response

Rujian Sun et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Multiple laser shock peening effects on residual stress distribution and fatigue crack growth behaviour of 316L stainless steel

Rasool Bikdeloo et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Mechanical

On the application of laser shock peening for retardation of surface fatigue cracks in laser beam-welded AA6056

Nikolai Kashaev et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

Influence of laser shock peening on fatigue performance of LZ50 axle steel for railway wheel set

Kai Tang et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Influence of Laser Shock Peening on Fatigue Properties of AA2024-T3 Alloy with a Fastener Hole

Ruslan Sikhamov et al.

METALS (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of laser shock peening without coating on fretting corrosion of copper contacts

Changkyoo Park et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Engineering, Mechanical

Fatigue behaviors of foreign object damaged Ti-6Al-4V alloys under laser shock peening

Yu Yang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Mechanical

Optimised laser peening strategies for damage tolerant aircraft structures

D. Busse et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of laser shock peening in different processes on fatigue life of 32CrNi steel

Wang Yong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Gradient microstructure and vibration fatigue properties of 2024-T351 aluminium alloy treated by laser shock peening

Xian-kai Meng et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Influence of laser peening on the high-temperature fatigue life and fracture of Inconel 718 nickel-based alloy

Jie Sheng et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser shock peening-induced surface gradient stress distribution and extension mechanism in corrosion fatigue life of AISI 420 stainless steel

Changyu Wang et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Engineering, Mechanical

Enhanced extra-long life fatigue resistance of a bimodal titanium alloy by laser shock peening

Kun Yang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of TiN/Ti coating combined with laser shock peening pre-treatment on the fatigue strength of Ti-6Al-4V titanium alloy

Xin Cao et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Optics

Fatigue life and fracture evolution of small-hole specimens by laser shock processing

Yinfang Jiang et al.

OPTICS AND LASER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel

S. S. Xu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Optics

Fatigue life rationalization of laser shock peened SAF 2205 with different swept direction

Cesar A. Vazquez Jimenezw et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Recovery of fatigue life using laser peening on 2024-T351 aluminium sheet containing scratch damage: The role of residual stress

Niall A. Smyth et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser shock processing with post-machining and deep cryogenic treatment on fatigue life of GH4169 super alloy

Jianfei Sun et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Influence of equal channel angular pressing and laser shock peening on fatigue behaviour of AM80 alloy

T. R. Praveen et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Fatigue crack growth in a laser shock peened residual stress field

M. Pavan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Optics

Thickness effect in laser shock processing for test specimens with a small hole under smaller laser power density

Yinfang Jiang et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Optics

Fatigue of Ti-17 titanium alloy with hole drilled prior and post to laser shock peening

Rujian Sun et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Laser Peening Process Parameters and Sequences on Residual Stress Profiles

Zina Kallien et al.

METALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of scanning path gradient on the residual stress distribution and fatigue life of AA2024-T351 aluminium alloy induced by LSP

Enoch Asuako Larson et al.

RESULTS IN PHYSICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti-6Al-4V alloy

Fabien Briffod et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Mechanics

Crack closure mechanisms in residual stress fields generated by laser shock peening: A combined experimental-numerical approach

S. Keller et al.

ENGINEERING FRACTURE MECHANICS (2019)

添加到收藏夹

Article Optics

Influence of multiple laser peening on vibration fatigue properties of TC6 titanium alloy

Jing Li et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Experimentally validated multi-step simulation strategy to predict the fatigue crack propagation rate in residual stress fields after laser shock peening

S. Keller et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of microstructure on high cycle fatigue behavior of brass processed by laser shock peening

Lin Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Study on the effect of multiple laser shock peening on residual stress and microstructural changes in modified 9Cr-1Mo (P91) steel

Arun Kumar Rai et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Microstructure evolution and static recrystallization during hot rolling and annealing of an equiaxed-structure TC21 titanium alloy

Ke Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

High Cycle Fatigue Performance in Laser Shock Peened TC4 Titanium Alloys Subjected to Foreign Object Damage

Sihai Luo et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Article Engineering, Industrial

Experimental and numerical investigation of residual stresses in laser shock peened AA2198

S. Keller et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Optics

Study on the effect of laser peening with different power densities on fatigue life of fastener hole

Y. F. Jiang et al.

OPTICS AND LASER TECHNOLOGY (2018)

添加到收藏夹

Article Optics

Influence of specimen thickness on the fatigue behavior of notched steel plates subjected to laser shock peening

V. Granados-Alejo et al.

OPTICS AND LASER TECHNOLOGY (2018)

添加到收藏夹

Article Optics

The effects of laser shock peening scanning patterns on residual stress distribution and fatigue life of AA2024 aluminium alloy

Samuel Adu-Gyamfi et al.

OPTICS AND LASER TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Surface integrity integrity and fatigue lives of Ti17 compressor blades subjected to laser shock peening with square spots

Shikun Zou et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Aluminizing mechanism on a nickel-based alloy with surface nanostructure produced by laser shock peening and its effect on fatigue strength

Luo Sihai et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Improvement in fatigue properties of 2024-T351 aluminum alloy subjected to cryogenic treatment and laser peening

Jianzhong Zhou et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Mechanics

A micromechanical model to study the closure stress effect on fatigue life of Ti6Al4V subjected to laser shock peening

Y. J. Luo et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Investigation on mechanical properties and microstructural evolution of TC6 titanium alloy subjected to laser peening at cryogenic temperature

Jing Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Laser shock peening induced fatigue crack retardation in Ti-17 titanium alloy

Rujian Sun et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

Effects of laser shock peening on the microstructure and fatigue crack propagation behaviour of thin AA2024 specimens

Nikolai Kashaev et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser shock peening on elevated temperature residual stress, microstructure and fatigue behavior of ATI 718Plus alloy

Micheal Kattoura et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser shock peening on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy

Micheal Kattoura et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Chemistry, Physical

Tensile properties and surface nanocrystallization analyses of H62 brass subjected to room-temperature and warm laser shock peening

J. Z. Lu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy

J. T. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Optics

Fatigue behavior of superferritic stainless steel laser shock treated without protective coating

L. Spadaro et al.

OPTICS AND LASER TECHNOLOGY (2017)

添加到收藏夹

Article Optics

Effect of laser shock peening on bending fatigue performance of AISI 9310 steel spur gear

Chong Peng et al.

OPTICS AND LASER TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser peening and shot peening on fatigue striations during FCGR study of Ti6Al4V

B. K. Pant et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

On the fatigue performance of laser hybrid welded high Zn 7000 alloys for next generation railway components

S. C. Wu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

Fatigue performance of biodegradable magnesium-calcium alloy processed by laser shock peening for orthopedic implants

M. P. Sealy et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

Effects of laser shock processing on high cycle fatigue crack growth rate and fracture toughness of aluminium alloy 6082-T651

Zoran Bergant et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Manufacturing

An Efficient Reliability-Based Simulation Method for Optimum Laser Peening Treatment

Peter J. Hasser et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Compound technology of manufacturing and multiple laser peening on microstructure and fatigue life of dual-phase spring steel

S. Prabhakaran et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure evolution during high cycle fatigue in Mg-6Zn-1Mn alloy

Daliang Yu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Optics

Effect of laser peening with different energies on fatigue fracture evolution of 6061-T6 aluminum alloy

J. Sheng et al.

OPTICS AND LASER TECHNOLOGY (2016)

添加到收藏夹

Review Optics

[INVITED] A review: Warm laser shock peening and related laser processing technique

Yiliang Liao et al.

OPTICS AND LASER TECHNOLOGY (2016)

添加到收藏夹

Review Optics

Recent development and future perspectives of low energy laser shock peening

S. Kalainathan et al.

OPTICS AND LASER TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth

S. Zabeen et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Mechanics

On the influence of laser peening with different coverage areas on fatigue response and fracture behavior of Ti-6Al-4V alloy

S. Huang et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Engineering, Mechanical

Finite element analysis of laser shock peening of 2050-T8 aluminum alloy

Neila Hfaiedh et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

添加到收藏夹

Article Engineering, Mechanical

Effect of advancing direction on fatigue life of 316L stainless steel specimens treated by double-sided laser shock peening

C. Correa et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

添加到收藏夹

Article Engineering, Mechanical

A computational methodology for determining the optimum re-peening schedule to increase the fatigue life of laser peened aircraft components

Anoop Vasu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

添加到收藏夹

Article Engineering, Mechanical

Influence of pulse sequence and edge material effect on fatigue life of Al2024-T351 specimens treated by laser shock processing

C. Correa et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

添加到收藏夹

Review Mechanics

Review of Residual Stress Modification Techniques for Extending the Fatigue Life of Metallic Aircraft Components

M. Sticchi et al.

APPLIED MECHANICS REVIEWS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of microstructure and local mechanical fields on intergranular stress corrosion cracking of a friction stir welded aluminum-copper-lithium 2050 nugget

Matthieu Dhondt et al.

CORROSION SCIENCE (2014)

添加到收藏夹

Article Engineering, Mechanical

Residual life prediction for healing fatigue damaged copper film by laser shock peening

X. -D. Liu et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2014)

添加到收藏夹

Article Engineering, Mechanical

Fatigue behaviour of geometric features subjected to laser shock peening: Experiments and modelling

M. Achintha et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Article Engineering, Mechanical

Fatigue crack growth in laser-shock-peened Ti-6Al-4V aerofoil specimens due to foreign object damage

B. Lin et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance

Xiangfan Nie et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect study and application to improve high cycle fatigue resistance of TC11 titanium alloy by laser shock peening with multiple impacts

Xiangfan Nie et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Fatigue Crack Retardation in LSP and SP Treated Aluminium Specimens

Elke Hombergsmeier et al.

11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2 (2014)

添加到收藏夹

Article Mechanics

Effects of laser energy on fatigue crack growth properties of 6061-T6 aluminum alloy subjected to multiple laser peening

S. Huang et al.

ENGINEERING FRACTURE MECHANICS (2013)

添加到收藏夹

Article Engineering, Mechanical

Healing fatigue damage by laser shock peening for copper film

Xiao-Dong Liu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2013)

添加到收藏夹

Article Engineering, Mechanical

Effects of laser peening with different coverage areas on fatigue crack growth properties of 6061-T6 aluminum alloy

S. Huang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experiment investigation on microstructure and mechanical properties of TC17 titanium alloy treated by laser shock peening with different laser fluence

Xiangfan Nie et al.

JOURNAL OF LASER APPLICATIONS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of heat treatment on the micro-indentation behavior of powder metallurgy nickel based superalloy FGH96

Mingjie Zhang et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of laser shock processing with different parameters and ways on residual stresses fields of a TC4 alloy blade

Y. W. Fang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

The strengthening mechanism of a nickel-based alloy after laser shock processing at high temperatures

Yinghong Li et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Simulation-based optimization of laser shock peening process for improved bending fatigue life of Ti-6Al-2Sn-4Zr-2Mo alloy

Sagar Bhamare et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Metallographic structure evolution of 6061-T651 aluminum alloy processed by laser shock peening: Effect of tempering at the elevated temperatures

X. D. Ren et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Mechanics

The influence of crack face contact on the prediction of fatigue crack propagation in residual stress fields

D. Schnubel et al.

ENGINEERING FRACTURE MECHANICS (2012)

添加到收藏夹

Article Engineering, Mechanical

Experimental results in fretting fatigue with shot and laser peened Al 7075-T651 specimens

J. Vazquez et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

添加到收藏夹

Article Engineering, Mechanical

Residual stress and fatigue life in laser shock peened open hole samples

Servando D. Cuellar et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

添加到收藏夹

Article Engineering, Mechanical

On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550°C

Igor Altenberger et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

添加到收藏夹

Article Engineering, Mechanical

Prediction and characterization of residual stresses from laser shock peening

Robert A. Brockman et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

Laser Surface Engineering of Magnesium Alloys: A Review

Ashish Singh et al.

JOM (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys

E. Maawad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of repeated impacts on mechanical properties and fatigue fracture morphologies of 6061-T6 aluminum subject to laser peening

J. Z. Zhou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fatigue in laser shock peened open-hole thin aluminium specimens

Goran Ivetic et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects

M. Dorman et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening

Chang Ye et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser peening on fatigue performance in 300M steel

T. E. Pistochini et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2011)

添加到收藏夹

Article Engineering, Mechanical

Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy

Omar Suliman Zaroog et al.

INTERNATIONAL JOURNAL OF FATIGUE (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of laser shock processing on the fatigue crack initiation and propagation of 7050-T7451 aluminum alloy

X. D. Ren et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improvement of fatigue property in 7050-T7451 aluminum alloy by laser peening and shot peening

Y. K. Gao

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of laser shock processing on fatigue crack growth of duplex stainless steel

C. Rubio-Gonzalez et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Characterisation of foreign object damage (FOD) and early fatigue crack growth in laser shock peened Ti-6Al-4V aerofoil specimens

S. Spanrad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel

J. Z. Lu et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts

J. Z. Lu et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Mechanics

The effect of residual stresses arising from laser shock peening on fatigue crack growth

A. Chahardehi et al.

ENGINEERING FRACTURE MECHANICS (2010)

添加到收藏夹

Article Mechanics

Evaluating stress intensity factors due to weld residual stresses by the weight function and finite element methods

Rui Bao et al.

ENGINEERING FRACTURE MECHANICS (2010)

添加到收藏夹

Article Engineering, Industrial

Simulation of residual stress induced by a laser peening process through inverse optimization of material models

Hemanth K. Amarchinta et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effects of laser peening and shot peening on high cycle fatigue in 7050-T7451 aluminum alloy

Harold Luong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improvement of fatigue life of Ti-6Al-4V alloy by laser shock peening

X. C. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion susceptibility of peened friction stir welded 7075 aluminum alloy joints

Omar Hatamleh et al.

CORROSION SCIENCE (2009)

添加到收藏夹

Article Engineering, Mechanical

A comprehensive investigation on the effects of laser and shot peening on fatigue crack growth in friction stir welded AA 2195 joints

Omar Hatamleh

INTERNATIONAL JOURNAL OF FATIGUE (2009)

添加到收藏夹

Article Nuclear Science & Technology

Stress corrosion cracking countermeasure observed on Ni-based alloy welds of BWR core support structure

Wataru Sagawaa et al.

NUCLEAR ENGINEERING AND DESIGN (2009)

添加到收藏夹

Article Engineering, Mechanical

The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons

Kevin K. Liu et al.

TRIBOLOGY INTERNATIONAL (2009)

添加到收藏夹

Article Engineering, Mechanical

Massive parallel laser shock peening: Simulation, analysis, and validation

A. W. Warren et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure characterization of 7050 aluminum alloy during dynamic recrystallization and dynamic recovery

H. E. Hu et al.

MATERIALS CHARACTERIZATION (2008)

添加到收藏夹

Article Materials Science, Coatings & Films

Model based optimization criteria for the generation of deep compressive residual stress fields in high elastic limit metallic alloys by ns-laser shock processing

M. Morales et al.

SURFACE & COATINGS TECHNOLOGY (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of laser peening treatment on high cycle fatigue properties of degassing-processed cast aluminum alloy

Kiyotaka Masaki et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Article Engineering, Mechanical

The effect of laser power density on the fatigue life of laser-shock-peened 7050 aluminium alloy

Q. Liu et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25-600°C

I. Nikitin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Article Engineering, Mechanical

The effect of controlled shot peening on the fatigue behaviour of 2024-T3 aluminium friction stir welds

A. Ali et al.

INTERNATIONAL JOURNAL OF FATIGUE (2007)

添加到收藏夹

Article Engineering, Mechanical

Laser and shot peening effects on fatigue crack growth in friction stir welded 7075-T7351 aluminum alloy joints

Omar Hatamleh et al.

INTERNATIONAL JOURNAL OF FATIGUE (2007)

添加到收藏夹

Article Engineering, Mechanical

Laser peening and shot peening effects on fatigue life and surface roughness of friction stir welded 7075-T7351 aluminum

Omar Hatamleh et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2007)

添加到收藏夹

Article Engineering, Mechanical

Predicting the effect of residual stress on fatigue crack growth

J. E. LaRue et al.

INTERNATIONAL JOURNAL OF FATIGUE (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of fatigue and fretting on residual stresses introduced by laser shock peening

A. King et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating

Y Sano et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of residual stress on the fatigue crack growth behavior of Al-Si-Mg cast alloys - Mechanisms and corrective mathematical models

DA Lados et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)

添加到收藏夹

Article Physics, Applied

Nucleation of deformation twins in nanocrystalline face-centered-cubic metals processed by severe plastic deformation

YT Zhu et al.

JOURNAL OF APPLIED PHYSICS (2005)

添加到收藏夹

Article Engineering, Mechanical

Laser shock peening on fatigue crack growth behaviour of aluminium alloy

Y Tan et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of residual stress under fretting fatigue

H Lee et al.

JOURNAL OF MATERIALS SCIENCE (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy

C Rubio-González et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Chemistry, Physical

Numerical simulation of surface deformation and residual stresses fields in laser shock processing experiments

JL Ocaña et al.

APPLIED SURFACE SCIENCE (2004)

添加到收藏夹

Article Engineering, Mechanical

Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys

AS Khan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304

I Nikitin et al.

SCRIPTA MATERIALIA (2004)

添加到收藏夹

Article Mechanics

Finite element analysis of plasticity-induced fatigue crack closure: an overview

K Solanki et al.

ENGINEERING FRACTURE MECHANICS (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the influence of mechanical surface treatments - deep rolling and laser shock peening - on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures

RK Nalla et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

添加到收藏夹

Review Engineering, Mechanical

Laser shock processing and its effects on microstructure and properties of metal alloys: a review

CS Montross et al.

INTERNATIONAL JOURNAL OF FATIGUE (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes

JM Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

添加到收藏夹

Article Optics

Surface prestressing to improve fatigue strength of components by laser shot peening

G Hammersley et al.

OPTICS AND LASERS IN ENGINEERING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.