4.5 Article

Estimating stay cable vibration under typhoon with an explainable ensemble learning model

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Civil

Marginal Hilbert spectrum and instantaneous phase difference as total damage indicators in bridges under operational traffic loads

Rick M. Delgadillo et al.

Summary: In this paper, the non-linear and non-stationary dynamic response of bridges under operational loads is studied, and a novel technique called Improved Completed Ensemble EMD with Adaptive Noise (ICEEMDAN) is used to decompose the signals into intrinsic mode functions (IMF) and obtain their corresponding Hilbert spectra. The marginal Hilbert spectrum (MHS) and instantaneous phase difference (IPD) are proposed as total damage indicators (DI) for damage detection, localization, and quantification under transient vibration due to traffic. Experimental and real case results demonstrate the robustness and sensitivity of ICEEMDAN in addressing damage location.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2023)

Article Engineering, Civil

Monitoring-based analysis of wind-induced vibrations of ultra-long stay cables during an exceptional wind event

Han Zhang et al.

Summary: This study investigates the extreme wind-induced vibration of ultra-long stay cables in a kilometer-level cable-stayed bridge based on monitoring data. The results show that the stay cables exhibit multi-modal vibrations with higher frequencies and larger out-of-plane amplitudes under extreme winds. The use of out-of-plane dampers is suggested to mitigate the large-amplitude vibration in exceptional wind conditions.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2022)

Article Construction & Building Technology

Monitoring, intelligent perception, and early warning of vortex-induced vibration of suspension bridge

Danhui Dan et al.

Summary: The paper proposes an intelligent monitoring and warning method for VIVs of suspension bridges based on the recursive Hilbert transform, achieving real-time perception, calculation, and online early warning. Through real-time analysis and extraction of structural displacement data, VIV events can be monitored in real time and tracked throughout the entire process.

STRUCTURAL CONTROL & HEALTH MONITORING (2022)

Article Engineering, Civil

Incorporating site-specific weigh-in-motion data into fatigue life assessment of expansion joints under dynamic vehicle load

Zhen Sun et al.

Summary: This paper proposes an approach to estimate the fatigue life of modular expansion joints under stochastic traffic load, and validates it using expansion joints in a cable-stayed bridge. The study finds that vehicle velocities, horizontal impact component, surface irregularities, and damping ratios of the expansion joints have an impact on the fatigue life.

ENGINEERING STRUCTURES (2022)

Article Engineering, Civil

Vision and Support Vector Machine-Based Train Classification Using Weigh-in-Motion Data

Zhen Sun et al.

Summary: This study proposes a method using images and support vector machine to classify trains with different numbers of carriages. The method accurately predicts different train types and achieves higher accuracy and shorter computation time compared to other machine learning algorithms.

JOURNAL OF BRIDGE ENGINEERING (2022)

Article Construction & Building Technology

Bridge damage detection via improved completed ensemble empirical mode decomposition with adaptive noise and machine learning algorithms

Rick M. Delgadillo et al.

Summary: The field of structural health monitoring is utilizing modern techniques and tools, such as decomposition techniques and machine learning algorithms, to identify damages in civil structures. This study presents a novel approach that uses signal processing and clustering-based methods for damage identification in bridges, demonstrating its effectiveness using real data.

STRUCTURAL CONTROL & HEALTH MONITORING (2022)

Article Construction & Building Technology

Data-driven prediction and interpretation of fatigue damage in a road-rail suspension bridge considering multiple loads

Zhen Sun et al.

Summary: This paper proposes a machine-learning-based method to predict fatigue damage in long-span suspension bridges using monitored parameters of temperature, wind, train, and roadway loads. The results show that the method achieves high accuracy and provides valuable information for maintenance work.

STRUCTURAL CONTROL & HEALTH MONITORING (2022)

Article Construction & Building Technology

Probabilistic Machine-Learning Methods for Performance Prediction of Structure and Infrastructures through Natural Gradient Boosting

Shi-Zhi Chen et al.

Summary: Data-driven models based on machine learning algorithms have proved to be effective in accurately predicting structural responses. However, previous approaches have been deterministic and overlooked the confidence of predictions. This study introduces a new algorithm called NGBoost, which directly produces probabilistic predictions. NGBoost provides robust estimates of prediction uncertainties and opens new pathways for self-learning algorithms and optimal design in engineering applications.

JOURNAL OF STRUCTURAL ENGINEERING (2022)

Article Engineering, Civil

Data-driven structural condition assessment for high-speed railway bridges using multi-band FIR filtering and clustering

Yiwei Li et al.

Summary: The monitoring data of high-speed railway bridges can be used to assess their structural condition in real time. A data-driven approach using train-induced response features, extracted from the measured data, is developed for structural condition assessment. Filtering and clustering techniques are applied to achieve the evaluation and degradation warning of bridge structures.

STRUCTURES (2022)

Article Construction & Building Technology

Effectiveness Assessment of TMDs in Bridges under Strong Winds Incorporating Machine-Learning Techniques

Zhen Sun et al.

Summary: In this paper, a method combining machine learning is developed to evaluate the effectiveness of tuned mass dampers (TMDs) in controlling wind-induced vibration in long-span bridges. Seven machine learning techniques were adopted to generate predictive models using structural health monitoring data. The proposed method is reliable, and it was found that wind velocity is the most important parameter for TMD effectiveness.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2022)

Article Engineering, Civil

Predicting fatigue damage of highway suspension bridge hangers using weigh-in-motion data and machine learning

Yang Deng et al.

Summary: This study proposes a novel method to estimate the fatigue damage of bridge hangers using support vector machine regression models based on traffic loading data and finite element analysis, eliminating the need for direct stress sensing equipment. The method is validated in fatigue life prediction of hangers on a suspension bridge.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2021)

Review Acoustics

Review on the new development of vibration-based damage identification for civil engineering structures: 2010-2019

Rongrong Hou et al.

Summary: This article reviews the progress in vibration-based damage identification methods over the past 10 years, classifying them by different damage indices and analytical/numerical techniques, discussing their advantages and disadvantages, and summarizing the challenges and future research directions in vibration-based damage identification.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Engineering, Civil

Reliability-based vehicle weight limit determination for urban bridge network subjected to stochastic traffic flow considering vehicle-bridge coupling

Shi-Zhi Chen et al.

Summary: This paper proposes a reliability-based method to determine the vehicle weight limit of urban bridges, including steps such as establishing a stochastic urban traffic model and conducting reliability analysis. A case study of 75 urban bridges in Nanjing, China was conducted, with results showing that the method can obtain more reasonable vehicle weight limits.

ENGINEERING STRUCTURES (2021)

Article Engineering, Multidisciplinary

Machine learning paradigm for structural health monitoring

Yuequan Bao et al.

Summary: The conventional vibration-based methods face challenges in accurately detecting structural damages, thus necessitating the development of novel diagnosis and prognosis methods based on various monitoring data.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

Article Construction & Building Technology

Interpretable XGBoost-SHAP Machine-Learning Model for Shear Strength Prediction of Squat RC Walls

De-Cheng Feng et al.

Summary: In this study, an advanced machine learning model was trained and interpreted for estimating the shear strengths of squat RC walls, utilizing a database of 434 samples. The model strategically combined the XGBoost algorithm for predictive modeling and the SHAP algorithm for analyzing factor importance. This setup achieved a high level of accuracy in shear strength estimation and provided physical and quantitative interpretations of the input-output dependencies.

JOURNAL OF STRUCTURAL ENGINEERING (2021)

Article Engineering, Multidisciplinary

Novelty detection of cable-stayed bridges based on cable force correlation exploration using spatiotemporal graph convolutional networks

Shunlong Li et al.

Summary: A novel detection method using spatiotemporal graph convolutional networks was developed in this study to analyze cable forces from different cable dynamometers, providing an effective way to diagnose structural changes and damages in bridges.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

Article Computer Science, Interdisciplinary Applications

Complex frequency identification using real modal shapes for a structure with proportional damping

Chun-Xu Qu et al.

Summary: This paper proposes an innovative method to identify complex frequencies for a structure with proportional damping using real modal shapes. The method considers the complex property of frequencies and uses Hilbert transform and k-means clustering method to estimate the complex frequencies effectively. The results show that the proposed method can be used in practical engineering.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2021)

Article Engineering, Civil

Fatigue damage prognosis of steel bridges under traffic loading using a time-based crack growth method

Yang Yu et al.

Summary: Traditional methods for fatigue damage assessment of steel bridges face difficulties in analyzing traffic-induced stress. A time-based fatigue crack growth model is proposed for predicting fatigue damage of steel bridges under traffic loading, using a crack growth kinetics function based on the physical mechanism of fatigue crack propagation.

ENGINEERING STRUCTURES (2021)

Article Construction & Building Technology

Damage Detection for Expansion Joints of a Combined Highway and Railway Bridge Based on Long-Term Monitoring Data

Zhe-Heng Chen et al.

Summary: This paper presents a method for establishing a temperature-displacement model using the LSSVM technique to detect damage in expansion joints. Input is extracted using PCA and parameters are optimized using HMFA to enhance model accuracy. Finally, damage thresholds are deduced using the Pauta criterion, demonstrating the effectiveness of the proposed method.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2021)

Article Acoustics

Observations of bridge stay cable vibrations in dry and wet conditions: A case study

Nicolo Daniotti et al.

Summary: The characteristics of wind-and rain-wind-induced vibrations of bridge stay cables are studied using ambient vibrations records acquired on a cable-stayed bridge. Critical conditions for the onset of large amplitude vibrations under light rainfall, mean wind speed values between 8 ms(-1) and 12 ms(-1) and wind-cable angle ranging 45 degrees to 65 &degrees were identified. The study also found that a single mode response associated with reduced velocities around 35 was generally activated during large cable oscillations in wet conditions, contributing to an improved understanding of the mechanism of stay cable vibrations.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Engineering, Civil

Probabilistic Seismic Performance Analysis of RC Bridges

Araliya Mosleh et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2020)

Article Construction & Building Technology

Machine learning-based compressive strength prediction for concrete: An adaptive boosting approach

De-Cheng Feng et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Civil

Tuned Mass Dampers for Wind-Induced Vibration Control of Chongqi Bridge

Zhen Sun et al.

JOURNAL OF BRIDGE ENGINEERING (2020)

Article Construction & Building Technology

Experimental Investigation on Wear Resistance of Bushing in Bridge Suspenders

Feng Wang et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2020)

Article Construction & Building Technology

Probabilistic Framework with Bayesian Optimization for Predicting Typhoon-Induced Dynamic Responses of a Long-Span Bridge

Yi-Ming Zhang et al.

JOURNAL OF STRUCTURAL ENGINEERING (2020)

Article Engineering, Civil

Modelling of longitudinal evolutionary power spectral density of typhoon winds considering high-frequency subrange

Tianyou Tao et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2019)

Article Engineering, Civil

Condition assessment of cables by pattern recognition of vehicle-induced cable tension ratio

Shunlong Li et al.

ENGINEERING STRUCTURES (2018)

Article Engineering, Mechanical

Bayesian operational modal analysis of Jiangyin Yangtze River Bridge

James Mark William Brownjohn et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Article Construction & Building Technology

Seismic response of a suspension bridge: Insights from long-term full-scale seismic monitoring system

Dionysius M. Siringoringo et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2018)

Article Construction & Building Technology

Identification of time-varying cable tension forces based on adaptive sparse time-frequency analysis of cable vibrations

Yuequan Bao et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2017)

Article Engineering, Civil

Fatigue Life Evaluation on Short Suspenders of Long-Span Suspension Bridge with Central Clamps

Zhongxiang Liu et al.

JOURNAL OF BRIDGE ENGINEERING (2017)

Article Engineering, Civil

Baseline-free real-time assessment of structural changes

Joao P. Santos et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2015)

Article Engineering, Civil

Effects of stiffening rings on the dynamic properties of hyperboloidal cooling towers

Jun-Feng Zhang et al.

STRUCTURAL ENGINEERING AND MECHANICS (2014)

Review Construction & Building Technology

Vibration Mechanisms and Controls of Long-Span Bridges: A Review

Yozo Fujino et al.

STRUCTURAL ENGINEERING INTERNATIONAL (2013)

Article Computer Science, Interdisciplinary Applications

Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysis

Tong Guo et al.

COMPUTERS & STRUCTURES (2012)

Article Engineering, Civil

Rain-wind-induced cable vibrations in the Alamillo cable-stayed bridge (Sevilla, Spain). Assessment and remedial action

Joan R. Casas et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2010)

Article Construction & Building Technology

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

X. G. Hua et al.

JOURNAL OF STRUCTURAL ENGINEERING (2009)

Article Engineering, Civil

Bridge reliability assessment based on monitoring

Dan M. Frangopol et al.

JOURNAL OF BRIDGE ENGINEERING (2008)

Article Engineering, Civil

Field observation of vortex- and rain-wind-induced stay-cable vibrations in a three-dimensional environment

D. Zuo et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2008)

Article Engineering, Civil

Field observations of rain-wind-induced cable vibration in cable-stayed Dongting Lake Bridge

Y. Q. Ni et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2007)

Article Engineering, Civil

A wireless structural health monitoring system with multithreaded sensing devices: design and validation

Yang Wang et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2007)

Article Computer Science, Artificial Intelligence

Random forests

L Breiman

MACHINE LEARNING (2001)

Article Statistics & Probability

Greedy function approximation: A gradient boosting machine

JH Friedman

ANNALS OF STATISTICS (2001)