相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Work hardening behavior and fracture mechanisms of Fe-18Mn-1.3C-2Cr low-density steel castings with varying proportions of aluminum alloying
Zhi-bin Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)
Corrosion and impact-abrasion-corrosion behaviors of quenching-tempering martensitic Fe-Cr alloy steels
Zhi-bin Zheng et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)
Effect of Laser Speed and Hatch Spacing on the Corrosion Behavior of 316L Stainless Steel Produced by Selective Laser Melting
Antonio Collazo et al.
MATERIALS (2022)
Synergistic effects of deposits and sulfate reducing bacteria on the corrosion of carbon steel
J. Yang et al.
CORROSION SCIENCE (2022)
Why CoCrFeMnNi HEA could not passivate in chloride solution?-A novel strategy to significantly improve corrosion resistance of CoCrFeMnNi HEA by N-alloying
Hao Feng et al.
CORROSION SCIENCE (2022)
Effects of crystallographic orientation on the corrosion behavior of stainless steel 316L manufactured by laser powder bed fusion
Satria Robi Trisnanto et al.
CORROSION SCIENCE (2022)
Precipitation behavior, mechanical properties, and corrosion resistance of rare earth-modified Al-Zn-Mg-Cu alloys
Huilong Zhong et al.
MATERIALS TODAY COMMUNICATIONS (2022)
Microstructure Evolution and Corrosion Behavior of Deformed Austenitic Stainless Steel Manufactured by Selective Laser Melting
Huimin Tao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Role of hot rolling procedure and solution treatment process on microstructure, strength and cryogenic toughness of high manganese austenitic steel
Z. G. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel
Cuiling Zhao et al.
MATERIALS & DESIGN (2021)
Corrosion Behavior of a Selective Laser Melted Inconel 718 Alloy in a 3.5 wt.% NaCl Solution
Yanbing Tang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Comparative study on the cavitation erosion behavior of two different rolling surfaces on 304 stainless steel
Z. X. Li et al.
TRIBOLOGY INTERNATIONAL (2021)
Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316L stainless steel fabricated via laser powder bed fusion
Yusuke Tsutsumi et al.
ADDITIVE MANUFACTURING (2021)
The passivity of selective laser melted 316L stainless steel
Decheng Kong et al.
APPLIED SURFACE SCIENCE (2020)
Microstructure and Mechanical Properties of AISI 316L Produced by Directed Energy Deposition-Based Additive Manufacturing: A Review
Abdollah Saboori et al.
APPLIED SCIENCES-BASEL (2020)
Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy
L. N. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of build height on the properties of large format stainless steel 316L fabricated via directed energy deposition
D. R. Feenstra et al.
ADDITIVE MANUFACTURING (2020)
Effect of microstructure on the passive behavior of selective laser melting-fabricated Hastelloy X in NaNO3 solution
Yingyue Yin et al.
MATERIALS CHARACTERIZATION (2020)
Corrosion behavior of carbon steel in dilute ammonia solution
Li Sun et al.
ELECTROCHIMICA ACTA (2020)
Revealing the superior corrosion protection of the passive film on selective laser melted 316L SS in a phosphate-buffered saline solution
Xiaoqi Yue et al.
APPLIED SURFACE SCIENCE (2020)
Correlation Between Microstructure and Tensile Properties of STS 316L and Inconel 718 Fabricated by Selective Laser Melting (SLM)
Jungsub Lee et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2020)
The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid
Cheng Man et al.
APPLIED SURFACE SCIENCE (2019)
Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: Influence of dissolved oxygen and pH
Zhongyu Cui et al.
CORROSION SCIENCE (2019)
Selective laser melting processing of 316L stainless steel: effect of microstructural differences along building direction on corrosion behavior
Kaijie Lin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Microstructure and Corrosion Characteristics of Selective Laser-Melted 316L Stainless Steel: The Impact of Process-Induced Porosities
M. Kazemipour et al.
JOM (2019)
Corrosion of metallic materials fabricated by selective laser melting
Decheng Kong et al.
NPJ MATERIALS DEGRADATION (2019)
Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting Under Different Scanning Speeds
Xiaoqing Ni et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Effect of grain size on mechanical property and corrosion resistance of the Ni-based alloy 690
Jinlong Lv
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting
Xin Gai et al.
CORROSION SCIENCE (2018)
Corrosion behavior of additively manufactured 316L stainless steel in acidic media
M. J. K. Lodhi et al.
MATERIALIA (2018)
The stability of passive film growth on copper in anaerobic sulphide solutions
Decheng Kong et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2017)
Passivation and electrochemical behavior of 316L stainless steel in chlorinated simulated concrete pore solution
Hong Luo et al.
APPLIED SURFACE SCIENCE (2017)
Electrochemical investigation and ab initio computation of passive film properties on copper in anaerobic sulphide solutions
Decheng Kong et al.
CORROSION SCIENCE (2017)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting
R. Casati et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Effects of deep brain stimulation of the nucleus basalis of Meynert in EEG resting-state oscillatory power and phase synchronization
H.L. Lee et al.
Brain Stimulation (2015)
Comparison of corrosion properties of passive films formed on coarse grained and ultrafine grained AISI 2205 duplex stainless steels
Lv Jinlong et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2015)
Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques
Chen Pan et al.
ELECTROCHIMICA ACTA (2011)
Passivity of 316L stainless steel in borate buffer solution studied by Mott-Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy
Zhicao Feng et al.
CORROSION SCIENCE (2010)
Influence of micro-structure on corrosion behavior of a Ni-based superalloy in 3.5% NaCl
Li Liu et al.
ELECTROCHIMICA ACTA (2007)
Influence of nanocrystallization on passive behavior of Ni-based superalloy in acidic solutions
Li Liu et al.
ELECTROCHIMICA ACTA (2007)
Effect of chloride ions on the corrosion behaviour of steel in 0.1 M citrate
HH Hassan
ELECTROCHIMICA ACTA (2005)