☆ 4.8 Article

Hopping Light Vat Photopolymerization for Multiscale Fabrication

SMALL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Multidisciplinary Sciences

In-situ transfer vat photopolymerization for transparent microfluidic device fabrication

Yang Xu et al.

Summary: This paper presents a general, high-resolution, and low-cost 3D printing process to solve the critical challenge in microfluidic device fabrication. The method achieves high accuracy and efficiency, and is compatible with commonly used light sources and photocurable resins. The verification through multifunctional devices demonstrates the reliability and feasibility of this approach.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Fabrication of flexible microheater with tunable heating capabilities by direct laser writing and selective electrodeposition

Ye Yang et al.

Summary: This work presents a novel manufacturing process for flexible microheaters with designed heating patterns, utilizing a hybrid manufacturing process. The fabricated microheaters have the advantages of high accuracy, flexible tunability, and low cost, and show excellent heating performance when connected to electricity.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Hybrid-Light-Source Stereolithography for Fabricating Macro-Objects With Micro-Textures

Wenxuan Jia et al.

Summary: This paper studies a hybrid-light-source stereolithography process that integrates two optical light sources to fabricate macro-objects with microscale surface structures. By using a novel calibration approach and a specific software system, high throughput fabrication of large areas with micro-features can be achieved.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Volumetric additive manufacturing of silica glass with microscale computed axial lithography

Joseph T. Toombs et al.

Summary: This article introduces a glass processing method for manufacturing complex microscopic structures. With microscale computed axial lithography, various microfluidic structures, micro-optical elements, and high-strength frameworks with different sizes and shapes can be fabricated.

SCIENCE (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

The Role of 3D Printing Technology in Microengineering of Microneedles

Usanee Detamornrat et al.

Summary: Microneedles (MNs) are minimally invasive devices that have gained extensive interest in various fields. The use of 3D printing technology allows for rapid creation of complex MN prototypes with high accuracy and customizable shape and dimension. Integration of MNs with other technologies has great potential in producing advanced transdermal drug delivery systems and medical devices.

SMALL (2022)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

A review on Vat Photopolymerization 3D-printing processes for dental application

Lalatovic Andjela et al.

Summary: This study provides a critical overview of Vat Photopolymerization in the dental field, highlighting the need for further research to elevate the field and transition to digital workflow in the future.

DENTAL MATERIALS (2022)

添加到收藏夹

Article Engineering, Manufacturing

A Vibration-Assisted Separation Method for Constrained-Surface-Based Stereolithography

Yang Xu et al.

Summary: A new vibration-assisted (VA) separation design for the SL process was presented, and experiments were conducted to study the VA separation mechanism and its effects on separation performance. Results showed a significant reduction in separation force using the VA separation-based method, with a relationship between separation force and separation time conforming to a stress-based fatigue model.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Chemistry, Analytical

Glioma-on-a-Chip Models

Merve Ustun et al.

Summary: Glioma-on-chip platforms simulate cancer cells' metabolic functions for analysis, offering a crucial tool for glioma research. This technology holds promise to enhance treatment efficacy, improve patient survival rates, and advance personalized medicine.

MICROMACHINES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multichannel Piezo-Ultrasound Implant with Hybrid Waterborne Acoustic Metastructure for Selective Wireless Energy Transfer at Megahertz Frequencies

Laiming Jiang et al.

Summary: This study presents a multichannel piezo-ultrasound implant that integrates a hybrid waterborne acoustic metastructure, multiple piezo-harvesters, and a miniaturized circuit for selective wireless control via ultrasound frequency switching. The developed implant demonstrates potential for multifunctional operations and enhances ultrasound energy transfer versatility.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Engineering, Manufacturing

An Investigation of Integrated Multiscale Three-Dimensional Printing for Hierarchical Structures Fabrication

Xiangjia Li et al.

Summary: This research explores an integrated approach for fabricating hierarchical objects with features at macro-, micro-, and nano-scales. By introducing and demonstrating the integration of two-photon polymerization (TPP), immersed surface accumulation (ISA), and mask image projection-based stereolithography (MIP-SL), the study addresses the challenge of multiscale fabrication and presents two test cases to validate the feasibility and efficiency of the proposed multiscale hierarchical printing approach. The developed multiscale 3D printing process demonstrates potential in various applications like optics, microfluidics, cell culture, and interface technology.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2021)

添加到收藏夹

Article Automation & Control Systems

Spatiotemporal Projection-Based Additive Manufacturing: A Data-Driven Image Planning Method for Subpixel Shifting in a Split Second

Chi Zhou et al.

Summary: Additive Manufacturing (AM) is a digital manufacturing process that requires a trade-off between process resolution and production efficiency. A data-driven mask image planning method is proposed to improve resolution without sacrificing efficiency by tuning the process in both temporal and spatial domains.

ADVANCED INTELLIGENT SYSTEMS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications

Yinxiu Zuo et al.

SMALL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printed Cactus-Inspired Spine Structures for Highly Efficient Water Collection

Xiangjia Li et al.

ADVANCED MATERIALS INTERFACES (2020)

添加到收藏夹

Article Engineering, Industrial

Modeling A Scanning-Mask Projection Vat Photopolymerization System For Multiscale Additive Manufacturing

Viswanath Meenakshisundaram et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Xolography for linear volumetric 3D printing

Martin Regehly et al.

NATURE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Volumetric additive manufacturing via tomographic reconstruction

Brett E. Kelly et al.

SCIENCE (2019)

添加到收藏夹

Article Automation & Control Systems

Three-dimensional printing of large objects with high resolution by scanning lithography

Ran He et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Programmable Liquid Adhesion on Bio-Inspired Re-Entrant Structures

Xiaojiang Liu et al.

SMALL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Volumetric Bioprinting of Complex Living-Tissue Constructs within Seconds

Paulina Nunez Bernal et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface

David A. Walker et al.

SCIENCE (2019)

添加到收藏夹

Article Automation & Control Systems

Delta DLP 3-D Printing of Large Models

Ran Yi et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2018)

添加到收藏夹

Article Engineering, Manufacturing

A vibration-assisted method to reduce separation force for stereolithography

Jie Jin et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printed Biomimetic Super-Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation

Yang Yang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Engineering, Manufacturing

A hybrid exposure concept for lithography-based additive manufacturing

Bernhard Busetti et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Biochemical Research Methods

Custom 3D printer and resin for 18 μm x 20 μm microfluidic flow channels

Hua Gong et al.

LAB ON A CHIP (2017)

添加到收藏夹

Article Engineering, Manufacturing

Multiscale Stereolithography Using Shaped Beams

Huachao Mao et al.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2017)

添加到收藏夹

Article Chemistry, Physical

Multiscale metallic metamaterials

Xiaoyu Zheng et al.

NATURE MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bioinspired Interfacial Materials with Enhanced Drop Mobility: From Fundamentals to Multifunctional Applications

Chonglei Hao et al.

SMALL (2016)

添加到收藏夹

Article Engineering, Industrial

An analytical model for scanning-projection based stereolithography

Mohammad Mandi Emami et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Continuous liquid interface production of 3D objects

John R. Tumbleston et al.

SCIENCE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Development of a 3D printer using scanning projection stereolithography

Michael P. Lee et al.

Scientific Reports (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Scanning-projection based stereolithography: Method and structure

Mohammad Mandi Emami et al.

SENSORS AND ACTUATORS A-PHYSICAL (2014)

添加到收藏夹

Article Engineering, Mechanical

Using variable beam spot scanning to improve the efficiency of stereolithography process

Cao Yi et al.

RAPID PROTOTYPING JOURNAL (2013)

添加到收藏夹

Article Engineering, Manufacturing

A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes

Yayue Pan et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Article Engineering, Manufacturing

Additive manufacturing based on optimized mask video projection for improved accuracy and resolution

Chi Zhou et al.

Journal of Manufacturing Processes (2011)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

TRACE THEOREMS FOR TREES AND APPLICATION TO THE HUMAN LUNGS

Bertrand Maury et al.

NETWORKS AND HETEROGENEOUS MEDIA (2009)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Speeded-Up Robust Features (SURF)

Herbert Bay et al.

COMPUTER VISION AND IMAGE UNDERSTANDING (2008)

添加到收藏夹

Article Engineering, Electrical & Electronic

Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography

J. Stampfl et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)

添加到收藏夹

Article Engineering, Electrical & Electronic

Projection micro-stereolithography using digital micro-mirror dynamic mask

C Sun et al.

SENSORS AND ACTUATORS A-PHYSICAL (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.