4.8 Article

Supramolecular Framework Constructed by Dendritic Nanopolymer for Stable Flexible Perovskite Resistive Random-Access Memory

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Inorganic & Nuclear

Compositional degradation with Br content in Cesium lead halide CsPbBrxI3-x

Manish Kumar et al.

Summary: This study investigates the phase transition and compositional failure mechanism of cesium lead iodide bromide compounds with varying bromine content. The structural, electrical, and optical properties of the compounds were characterized, revealing significant changes within a specific range of bromine content.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Article Chemistry, Physical

High-Performance Resistive Random Access Memories Based on Two-Dimensional HAPbI4 Organic-Inorganic Hybrid Perovskite

Binglin Liu et al.

Summary: In this study, a two-dimensional HAPbI4 perovskite with high stability was prepared and used to fabricate a resistive random access memory (RRAM) device with superior resistive switching performance, high on/off ratio, long retention time, and stability after prolonged exposure to air.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2022)

Article Nanoscience & Nanotechnology

A Polyanionic Strategy to Modify the Perovskite Grain Boundary for a Larger Switching Ratio in Flexible Woven Resistive Random-Access Memories

Junqing Shen et al.

Summary: This study investigates the intergranular interface modification of organic-inorganic hybrid perovskites to enhance the flexibility, stability, and resistive switching performance of resistive random-access memories (RRAMs). By introducing polymer additives with a polyanionic backbone, the distribution of cage-shaped cavity molecules at the perovskite grain boundaries is improved. This novel strategy improves the properties of perovskite RRAM devices and shows potential for high-density data storage.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Reversibly Controlled Ternary Polar States and Ferroelectric Bias Promoted by Boosting Square-Tensile-Strain

Jun Han Lee et al.

Summary: This study reports on the deterministic switching between the ferroelectric and pinched states using a new BaZrO3 substrate, which promotes the creation of multiple oxygen vacancies and proposes the complexity of defect-dipoles. This discovery is important for developing functional materials and advancing the field of heterostructures.

ADVANCED MATERIALS (2022)

Review Nanoscience & Nanotechnology

Recent Progress of Organic-Inorganic Hybrid Perovskites in RRAM, Artificial Synapse, and Logic Operation

Cheng Zhang et al.

Summary: This review provides an overview of the structural, photoelectronic properties, and device fabrication technologies of organic-inorganic hybrid perovskites (OHPs). It discusses the recent progress and applications of OHPs in resistive random-access memory (RRAM), artificial synapses, and logic operation. The operational mechanisms, performance improvement strategies, challenges, and future development prospects of OHPs-based devices are also summarized.

SMALL SCIENCE (2022)

Review Materials Science, Multidisciplinary

Multi-factor-controlled ReRAM devices and their applications

Bai Sun et al.

Summary: Resistive random access memory (ReRAM) is a new type of non-volatile memory device with advantages such as high read/write speed, high storage density, and low power consumption. Recent studies have shown that the resistance state conversion in some RRAMs can be controlled by factors such as light, magnetic field, and humidity. Multi-factor-controlled ReRAM devices are expected to have wide applications in multifunctional devices.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Article Chemistry, Physical

Halide Perovskites for Resistive Switching Memory

Kaijin Kang et al.

Summary: This Perspective provides a condensed overview of halide perovskite RRAMs, including materials, device performance, switching mechanism, and potential applications. The challenges of halide perovskite films, device fabrication, memory performance reliability, and understanding of switching mechanism are discussed, along with potential paths for future research.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Review Polymer Science

Bottlebrush polymers: From controlled synthesis, self-assembly, properties to applications

Zili Li et al.

Summary: BBPs are a class of materials with excellent performance in various applications, and their structures can be controlled by manipulating chemical structures and compositions, showing great potential in a wide range of applications.

PROGRESS IN POLYMER SCIENCE (2021)

Article Energy & Fuels

Flexible CH3NH3PbI3 perovskite solar cells with high stability based on all inkjet printing

Bowen Gao et al.

Summary: The study successfully realized large area CH3NH3PbI3 perovskite solar cells based on all inkjet printing, achieving high power conversion efficiency. Furthermore, with the use of Fluorinated thermoplastic polyurethane film packaging, the stability of the cells was excellent.

SOLAR ENERGY (2021)

Review Chemistry, Multidisciplinary

Recent Advances in Synthesis, Properties, and Applications of Metal Halide Perovskite Nanocrystals/Polymer Nanocomposites

Shuang Liang et al.

Summary: Metal halide perovskite nanocrystals combined with polymers create nanocomposites with unique optoelectronic properties, promising applications in various fields like displays, lighting, sensing, biomedical technologies, and energy conversion. The recent advances in synthetic strategies, properties, and applications of metal halide PNC/polymer nanocomposites are highlighted, with an outlook on future research directions and challenges.

ADVANCED MATERIALS (2021)

Article Chemistry, Inorganic & Nuclear

Assessing the Impact of Ambient Fabrication Temperature on the Performance of Planar CH3NH3PbI3 Perovskite Solar Cells

Zuzanna Molenda et al.

Summary: The ambient fabrication temperature inside a glove box plays a crucial role in determining the overall power conversion efficiency in solar cells based on MAPI hybrid perovskites, with a minor temperature variation affecting both reproducibility and efficiency. The study concludes that the variation in solvent vapor pressure impacts the crystallization process, leading to increased trap density within the perovskite bandgap.

EUROPEAN JOURNAL OF INORGANIC CHEMISTRY (2021)

Review Chemistry, Multidisciplinary

Lithium-Conducting Branched Polymers: New Paradigm of Solid-State Electrolytes for Batteries

Shu-Meng Hao et al.

Summary: The development of lithium-based batteries has rapidly progressed in recent decades, with a focus on polymer electrolytes to enhance safety and energy storage capabilities. By designing and synthesizing branched polymers, researchers have increased the ionic conductivity of these electrolytes, leading to improved lithium transport in batteries. This Mini Review summarizes the diversity of branched polymers for polymer electrolytes and provides design principles for enhancing their physical, mechanical, and electrochemical performance. Challenges and future prospects in this field are also outlined.

NANO LETTERS (2021)

Article Nanoscience & Nanotechnology

Artificial Synapse Based on Organic-Inorganic Hybrid Perovskite with Electric and Optical Modulation

Jie Lao et al.

Summary: An artificial synapse based on a KI-MAPbI(3) hybrid film has been developed, showing dual response to electric and light stimuli and successfully simulating biological synaptic functions. For image recognition, the device achieved an accuracy of 84.2% under light illumination after only 1500 learning phases.

ADVANCED ELECTRONIC MATERIALS (2021)

Article Nanoscience & Nanotechnology

Enhancing the Switching Performance of CH3NH3PbI3 Memristors by the Control of Size and Characterization Parameters

Himangshu Jyoti Gogoi et al.

Summary: This paper analyzes the performance of hybrid organic inorganic perovskite (HOIP) devices. The study shows that device performance is affected by scaling and measurement conditions. Parameters such as compliance current, voltage scan rate, pulse width, amplitude, and frequency significantly alter device switching parameters. Additionally, the authors propose a general protocol for characterizing memristors made of HOIPs.

ADVANCED ELECTRONIC MATERIALS (2021)

Review Chemistry, Multidisciplinary

Perovskite-Based Phototransistors and Hybrid Photodetectors

Chao Xie et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Pharmacology & Pharmacy

Dendrimers in the context of nanomedicine

Ana Paula Dias et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Article Chemistry, Multidisciplinary

Halide Perovskites for Nonlinear Optics

Jialiang Xu et al.

ADVANCED MATERIALS (2020)

Article Materials Science, Multidisciplinary

Resistive switching performance of fibrous crosspoint memories based on an organic-inorganic halide perovskite

Pan Shu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Review Materials Science, Multidisciplinary

Memory materials and devices: From concept to application

Zhenhan Zhang et al.

INFOMAT (2020)

Article Materials Science, Multidisciplinary

Probe-induced resistive switching memory based on organic-inorganic lead halide perovskite materials

Abbas Shaban et al.

ORGANIC ELECTRONICS (2019)

Article Nanoscience & Nanotechnology

Enhanced Switching Ratio and Long-Term Stability of Flexible RRAM by Anchoring Polyvinylammonium on Perovskite Grains

Xiaofei Cao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Multidisciplinary Sciences

Conductive carbon nanofiber interpenetrated graphene architecture for ultra-stable sodium ion battery

Mingkai Liu et al.

NATURE COMMUNICATIONS (2019)

Article Nanoscience & Nanotechnology

Conducting Bridge Resistive Switching Behaviors in Cubic MAPbI3, Orthorhombic RbPbI3, and Their Mixtures

SangMyeong Lee et al.

ADVANCED ELECTRONIC MATERIALS (2019)

Article Materials Science, Multidisciplinary

Cycling-Induced Degradation of Organic-Inorganic Perovskite-Based Resistive Switching Memory

Yanyun Ren et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Review Nanoscience & Nanotechnology

A Review of the Role of Solvents in Formation of High-Quality Solution-Processed Perovskite Films

Xiaobing Cao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

A supermolecular building block approach for construction of chiral metal-organic frameworks

Hong Jiang et al.

CHEMICAL COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation

Tianqi Niu et al.

ADVANCED MATERIALS (2018)

Article Materials Science, Multidisciplinary

A remarkable performance of CH3NH3PbI3 perovskite memory based on passivated method

Hengmei Cai et al.

ORGANIC ELECTRONICS (2018)

Review Polymer Science

Synthesis and applications of stimuli-responsive hyperbranched polymers

Dali Wang et al.

PROGRESS IN POLYMER SCIENCE (2017)

Article Chemistry, Multidisciplinary

Resistive Switching Properties through Iodine Migrations of a Hybrid Perovskite Insulating Layer

Dong Jun Kim et al.

ADVANCED MATERIALS INTERFACES (2017)

Article Chemistry, Multidisciplinary

Iodine Vacancy Redistribution in Organic-Inorganic Halide Perovskite Films and Resistive Switching Effects

Xiaojian Zhu et al.

ADVANCED MATERIALS (2017)

Article Nanoscience & Nanotechnology

Two-Dimensional CH3NH3PbI3 Perovskite Nanosheets for Ultrafast Pulsed Fiber Lasers

Pengfei Li et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Flexible Hybrid Organic-Inorganic Perovskite Memory

Chungwan Gu et al.

ACS NANO (2016)

Article Chemistry, Multidisciplinary

Organolead Halide Perovskites for Low Operating Voltage Multilevel Resistive Switching

Jaeho Choi et al.

ADVANCED MATERIALS (2016)

Article Materials Science, Multidisciplinary

Resistance random access memory

Ting-Chang Chang et al.

MATERIALS TODAY (2016)

Review Biochemistry & Molecular Biology

Neutral- and Multi-Colored Semitransparent Perovskite Solar Cells

Kyu-Tae Lee et al.

MOLECULES (2016)

Article Multidisciplinary Sciences

Ionic transport in hybrid lead iodide perovskite solar cells

Christopher Eames et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Multidisciplinary

The Role of Chlorine in the Formation Process of CH3NH3PbI3-xClx Perovskite

Hui Yu et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Chemistry, Multidisciplinary

A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells

Manda Xiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Review Chemistry, Multidisciplinary

A supermolecular building approach for the design and construction of metal-organic frameworks

Vincent Guillerm et al.

CHEMICAL SOCIETY REVIEWS (2014)

Article Nanoscience & Nanotechnology

Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells

Jeong-Hyeok Im et al.

NATURE NANOTECHNOLOGY (2014)

Article Biochemical Research Methods

Effects of Branching Architecture and Linker on the Activity of Hyperbranched Polymer-Drug Conjugates

Omathanu Perumal et al.

BIOCONJUGATE CHEMISTRY (2009)

Review Chemistry, Multidisciplinary

Design and synthesis of metal-organic frameworks using metal-organic polyhedra as supermolecular building blocks

John J. Perry et al.

CHEMICAL SOCIETY REVIEWS (2009)

Article Chemistry, Multidisciplinary

Supermolecular building blocks (SBBs) and crystal design: 12-connected open frameworks based on a molecular cubohemioctahedron

Amy J. Cairns et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)

Article Chemistry, Multidisciplinary

Supermolecular building blocks (SBBs) for the design and synthesis of highly porous metal-organic frameworks

Farid Nouar et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)