☆ 4.8 Article

Small Molecules Functionalized Zinc Oxide Interlayers for High Performance Low-Temperature Carbon-Based CsPbI2Br Perovskite Solar Cells

SMALL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

Recent Progress of Carbon-Based Inorganic Perovskite Solar Cells: From Efficiency to Stability

Xiang Zhang et al.

Summary: Organic-inorganic hybrid perovskite solar cells (PSCs) are a promising next-generation photovoltaic technology, but their commercialization is limited by poor device stability. Carbon-based inorganic PSCs (C-IPSCs) overcome this stability challenge and offer advantages such as simplified fabrication, cost reduction, and moisture resistance. Through various strategies, the power conversion efficiency of C-IPSCs has increased rapidly from 5% to over 15%. This review summarizes the recent progress, discusses existing challenges, and provides prospects for future development of C-IPSCs.

ADVANCED ENERGY MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Stabilized CsPbI3 for Air-Fabricated Inverted Inorganic Perovskite Photovoltaics with Wide Humidity Operating Window

Sheng Fu et al.

Summary: A novel strategy converting harmful water erosions into in situ stabilizer was proposed, leading to efficient inverted CsPbI3 PSCs fabricated with a wide humidity operating window. A champion efficiency of 19.25% was achieved, with improved stability against various ages.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Synergistic passivation by alkali metal and halogenoid ions for high efficiency HTM-free carbon-based CsPbI2Br solar cells

Zechao Yang et al.

Summary: This study utilizes a synergistic passivation strategy with alkali metal and halogenoid ions in the NaSCN additive to enhance the quality and performance of CsPbI2Br films, effectively reducing nonradiative recombination loss and achieving a champion PCE of 14.63% in all-inorganic CsPbI2Br Perovskite solar cells.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells

Xiaodong Li et al.

Summary: A stable perovskite heterojunction was achieved in inverted solar cells by sulfidating the surface of lead-rich perovskite films, resulting in improved power conversion efficiency and open-circuit voltage.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dependence of the Heterogeneity of Grain Boundaries on Adjacent Grains in Perovskites and Its Impact on Photovoltage

Wenlong Yao et al.

Summary: This study uses photoconductive atomic force microscopy to investigate the photocurrent and photovoltage of large-grained perovskites, revealing that photocurrent collection along grain boundaries relies on adjacent grains, showing grain boundary to grain boundary heterogeneity. Additionally, it is found that the photovoltage of grains deduced at specific positions is larger than that of grain boundaries, playing a crucial role in improving photovoltage.

SMALL (2022)

添加到收藏夹

Article Chemistry, Physical

CsI Enhanced Buried Interface for Efficient and UV-Robust Perovskite Solar Cells

Hang Xu et al.

Summary: By utilizing CsI-SnO2 complex as the buried interface for the electron transport layer, an effective strategy for enhancing the efficiency and stability of perovskite solar cells has been achieved. CsI modification facilitates perovskite film growth and defect passivation, while the gradient distribution of Cs+ contributes to suitable band alignment and enhanced resistance to UV exposure, resulting in significantly improved power conversion efficiency and UV stability for FAPbI(3)-based PSCs.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Modification of SnO2 with Phosphorus-Containing Lewis Acid for High-Performance Planar Perovskite Solar Cells with Negligible Hysteresis

Yanqiang Hu et al.

Summary: In this study, phosphorus-containing Lewis acids were used to modify the SnO2/perovskite interface, accelerating electron transfer and reducing energy barriers, ultimately increasing the efficiency of PSCs. The performance of the devices was significantly improved by this approach, with hysteresis effectively controlled.

SOLAR RRL (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Rear Electrode Materials for Perovskite Solar Cells

Rui Chen et al.

Summary: Perovskite solar cells (PSCs) are a promising next-generation photovoltaic technology due to their high efficiency and low cost. The stability issue needs to be resolved urgently for the commercialization of PSCs, and the choice of rear electrode material is crucial for achieving long-term stability. This review summarizes recent progress in the development of rear electrodes based on different materials and discusses their impacts on device stability, degradation mechanisms, overall efficiency, and cost-effectiveness.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low temperature fabrication for high-performance semitransparent CsPbI2Br perovskite solar cells

Xiaogang Yang et al.

Summary: A facile method to prepare highly stable all-inorganic CsPbI2Br perovskite film at low temperature by incorporating a small amount of GABA has been reported. The devices exhibit reproducible photovoltaic performance with excellent stability. In addition, this method enables the fabrication of semitransparent CsPbI2Br perovskite solar cells.

CHINESE CHEMICAL LETTERS (2022)

添加到收藏夹

Article Engineering, Environmental

Surface dipole affords high-performance carbon-based CsPbI2Br perovskite solar cells

Zhongliang Yan et al.

Summary: In this study, the electronic state of the interface between CsPbI2Br and the carbon electrode in all-inorganic C-PSCs was improved by introducing ATHPBr molecule, leading to enhanced hole extraction and collection. The modified devices exhibited a higher efficiency and stability.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Passivating buried interface via self-assembled novel sulfonium salt toward stable and efficient perovskite solar cells

Xin Zuo et al.

Summary: A simple and effective buried interface passivation strategy based on cation engineering was developed for perovskite solar cells. The modifiers CDSC and DPAH can passivate defects on the surface of perovskite and SnO2 films, and reduce interfacial energy barrier by improving energy band alignment. CDSC demonstrated superior defect passivation and energy band modulation compared to DPAH.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Chlorobenzenesulfonic Potassium Salts as the Efficient Multifunctional Passivator for the Buried Interface in Regular Perovskite Solar Cells

Yao Dong et al.

Summary: This study presents a novel agent for modifying the interface properties of perovskite solar cells, resulting in improved efficiency and stability. The agent interacts with the surface of SnO2, filling oxygen vacancies and reducing defect density. The modified devices exhibit efficient charge extraction and transport, leading to high conversion efficiency and stability.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Elimination of Interfacial Lattice Mismatch and Detrimental Reaction by Self-Assembled Layer Dual-Passivation for Efficient and Stable Inverted Perovskite Solar Cells

Jiaqi Zhang et al.

Summary: In this study, the issues of interfacial lattice mismatch and adverse reaction in nickel oxide-based inverted perovskite solar cells are addressed by using a self-assembled small molecule CBSA, achieving high conversion efficiency and excellent stability.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Review Chemistry, Physical

Buried Interface Modification in Perovskite Solar Cells: A Materials Perspective

Zhi-Wen Gao et al.

Summary: This article examines the latest progress in modifying the buried interface of organic-inorganic hybrid perovskite solar cells (PSCs) to enhance their performance and stability. It discusses the use of various materials and techniques and provides valuable insights for achieving higher power conversion efficiency in PSCs and interface adjustment in other layered structure heterojunction devices.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Annealing-free perovskite films by EDOT-assisted anti-solvent strategy for flexible indoor and outdoor photovoltaics

Chong Dong et al.

Summary: By introducing 3,4-ethoxylene dioxy thiophene (EDOT) into the anti-solvent, annealing-free perovskite films with enlarged crystal grains and reduced defects can be achieved, promoting the development of low-cost flexible perovskite photovoltaics.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Tailoring type-II all-in-one buried interface for 1.635V-voltage, all-inorganic CsPbBr3 perovskite solar cells

Xinpeng Yao et al.

Summary: In this study, a SnO2-SnS2 heterojunction nanocrystal was used to heal the defective interface of all-inorganic CsPbBr3 PSCs, resulting in high efficiency and stability.

NANO ENERGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Alkali Metal Cations Modulate the Energy Level of SnO2 via Micro-agglomerating and Anchoring for Perovskite Solar Cells

Rui Zhao et al.

Summary: This study addresses the issues of facile agglomeration and energy level mismatch in SnO2 films used in perovskite solar cells by doping alkali metal oxalates. By optimizing the film quality and energy states of SnO2-Na, the PSC efficiency is significantly improved, achieving a high open-circuit voltage.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Revealing Steric-Hindrance-Dependent Buried Interface Defect Passivation Mechanism in Efficient and Stable Perovskite Solar Cells with Mitigated Tensile Stress

Qian Zhou et al.

Summary: In this study, a novel and effective steric-hindrance-dependent buried interface defect passivation and stress release strategy is reported, which utilizes adamantane derivative molecules to modify the SnO2/perovskite interface. The experimental and theoretical results confirm the steric-hindrance-dependent defect passivation effect and interfacial chemical interaction strength. The device performance is enhanced by mitigating interfacial strain and passivating interfacial defects. The ADAA-modified device achieves an impressive efficiency of 23.18%.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fluorinated Interfaces for Efficient and Stable Low-Temperature Carbon-Based CsPbI2Br Perovskite Solar Cells

Xiang Zhang et al.

Summary: Introducing potassium trifluoroacetate and 4-trifluorophenyl methylammonium bromide into CsPbI2Br perovskite solar cells improves the interfacial energy level alignment, film quality, passivation of defects, and suppression of charge recombination and ion migration, resulting in higher conversion efficiency and stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhancing the Hot Carrier Injection of Perovskite Solar Cells by Incorporating a Molecular Dipole Interlayer

Tai Wu et al.

Summary: Surface passivation of perovskite films through organic functional small molecules is an effective strategy to enhance the efficiency and stability of perovskite solar cells. Two new naphthalimide-based organic small molecules, PX (X = F, I), are designed in this study for efficient passivation of surface defects in perovskite films. The results show superior photovoltaic properties for PX-treated perovskite solar cells, with significantly higher power conversion efficiency compared to the reference device without passivators.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polishing the Lead-Poor Surface for Efficient Inverted CsPbI3 Perovskite Solar Cells

Sheng Fu et al.

Summary: Triiodide cesium lead perovskite has the potential to be used in efficient and stable photovoltaics. However, the development of inverted devices and their compatibility with tandem devices is still a challenge. This study finds that the surface components of CsPbI3 are lead-poor and the traps present are p-type with localized states. This leads to poor electron transfer and nonradiative recombination, affecting the performance of the photovoltaics. Polishing treatment with 1,4-butanediamine can eliminate these traps and improve the efficiency of the CsPbI3 photovoltaics.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Asymmetric organic diammonium salt buried in SnO2 layer enables fast carrier transfer and interfacial defects passivation for efficient perovskite solar cells

Hongru Ma et al.

Summary: Reasonably passivating interfacial defects and reducing non-radiative recombination are effective strategies to improve the efficiency and stability of perovskite solar cells. In this study, the burying of a suitable ammonium salt in the electron transport layer was found to enhance the electron mobility, optimize the energy level arrangement, and improve the crystallinity of the perovskite layer. As a result, the power conversion efficiency of the solar cells was significantly improved, and their operational stability was enhanced.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Synergistic bonding stabilized interface for perovskite solar cells with over 24% efficiency

Weili Fan et al.

Summary: The study demonstrates that π-conjugated oxysalt can serve as an effective interfacial binder and defect passivator for stabilizing the SnO2/perovskite interface, leading to improved efficiency and stability of perovskite solar cells.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anchoring Vertical Dipole to Enable Efficient Charge Extraction for High-Performance Perovskite Solar Cells

Heng Liu et al.

Summary: This study fabricates highly efficient and stable perovskite solar cells using organic-inorganic complexes as multifunctional interlayers via a two-step sequential method. The resulting devices exhibit high photovoltaic conversion efficiency and excellent ambient stability, while reducing trap states and improving charge carrier extraction efficiency.

ADVANCED SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Understanding the stability origins of ambient stable CsPbI2Br inorganic halide perovskites

Congtan Zhu et al.

Summary: Research has shown that the presence of oxygen and moisture during the preparation of CsPbI2Br halide perovskite in dry and humid air can affect its phase stability, leading to the development of more robust IHPs.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Article Electrochemistry

Suppressed recombination for monolithic inorganic perovskite/silicon tandem solar cells with an approximate efficiency of 23%

Sanlong Wang et al.

Summary: This study introduces an effective strategy using an inorganic halide salt called nickel iodide to suppress non-radiative recombination in inorganic perovskite solar cells. By combining the inorganic perovskite top cell with a silicon bottom cell, the researchers achieved efficient and stable monolithic inorganic perovskite/silicon tandem solar cells for the first time. This work provides a promising strategy for using inorganic passivation materials to improve the performance and stability of solar cells.

ESCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

ZnO electron transporting layer engineering realized over 20% efficiency and over 1.28 V open-circuit voltage in all-inorganic perovskite solar cells

Xiao Wu et al.

Summary: In this work, low-temperature processed ZnO doped with PbX2 is used as an ETL alternative to improve the stability and performance of cesium lead based all-inorganic perovskite solar cells. The incorporation of PbX2 enhances the energy level alignment and promotes the growth of the perovskite layer, leading to enhanced charge extraction and suppression of charge recombination. As a result, the efficiency of the PSCs is significantly improved.

ECOMAT (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Alkali Metal Cations Modulate the Energy Level of SnO2 via Micro-agglomerating and Anchoring for Perovskite Solar Cells

Rui Zhao et al.

Summary: By doping alkali metal oxalates into SnO2 precursor, this study improved the quality and electron conductivity of SnO2-Na films, optimized band alignment, and achieved the best PSC efficiency of 20.78% with a significantly enhanced open-circuit voltage of 1.10 V.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Modification of Energy Level Alignment for Boosting Carbon-Based CsPbI2Br Solar Cells with 14% Certified Efficiency

Guizhi Zhang et al.

Summary: By modifying the perovskite surface and utilizing a specific spin coating method to prepare thicker perovskite films, the power conversion efficiency and stability of carbon-based all-inorganic perovskite solar cells (C-PSCs) have been successfully improved.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Multifunctional potassium hexafluorophosphate passivate interface defects for high efficiency perovskite solar cells

Zhengchun Wang et al.

Summary: Utilizing potassium hexafluorophosphate as an interface material can improve carrier transport and reduce charge recombination in perovskite solar cells, leading to higher efficiency and consistent performance over time.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Surface Fluorination of TiO2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet-Light Stability

Wanpei Hu et al.

Summary: By in situ fluorination, TiO2 nanocrystals can increase electron mobility, decrease trap state density, and inhibit photocatalytic activity; utilizing fluorinated TiO2 as ETL enables high efficiency and stability of perovskite solar cells.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Achieving Efficient and Stable Perovskite Solar Cells in Ambient Air Through Non-Halide Engineering

Zhen Wang et al.

Summary: The study introduces a novel precursor engineering method for fabricating high-efficiency perovskite solar cells using non-halide lead sources in ambient air, demonstrating both stability and high efficiency in humid conditions.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Antisolvent- and Annealing-Free Deposition for Highly Stable Efficient Perovskite Solar Cells via Modified ZnO

Ziyu Wang et al.

Summary: A complexed ZnO material (E-ZnO) was developed as an improved electron selective layer in perovskite solar cells, showing higher electron mobility and better energy level matching compared to traditional ZnO. By utilizing E-ZnO and a new perovskite film fabrication process without annealing or antisolvent, the highest efficiency of 20.39% was achieved for PSCs. Additionally, unencapsulated PSCs with E-ZnO maintained 95% of their initial efficiency after exposure to ambient atmosphere for 3604 hours.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Engineering, Environmental

Interfacial defect passivation and stress release by multifunctional KPF6 modification for planar perovskite solar cells with enhanced efficiency and stability

Huan Bi et al.

Summary: This study presents a multifunctional interface modification strategy using KPF6 molecule to improve the interface contact and enhance the efficiency and stability of PSCs. The KPF6 modification leads to improved film quality, defect passivation, and stress release, resulting in a significant enhancement in efficiency and stability of the devices.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailored Lattice Tape to Confine Tensile Interface for 11.08%-Efficiency All-Inorganic CsPbBr3 Perovskite Solar Cell with an Ultrahigh Voltage of 1.702 V

Qingwei Zhou et al.

Summary: The authors successfully reduced the superficial lattice tensile strain by incorporating Ti3C2Clx MXene into CsPbBr3 film, leading to improved efficiency of CsPbBr3 all-inorganic PSCs. They achieved a record high efficiency for this type of PSC and demonstrated stable performance under different environmental conditions.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

CsPbBr3 Nanocrystal Induced Bilateral Interface Modification for Efficient Planar Perovskite Solar Cells

Jianjun Zhang et al.

Summary: By doping CsPbBr3 nanocrystals into perovskites, a bilateral interface modification was achieved which effectively suppressed defects and enhanced electron transport. The enhanced built-in electric field facilitated oriented migration of carriers within the perovskite, resulting in a power conversion efficiency exceeding 20% in the solar cells.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Amino-capped zinc oxide modified tin oxide electron transport layer for efficient perovskite solar cells

Rongjun Zhao et al.

Summary: The use of NH2-ZnO@SnO2 composite as ETL has successfully improved the efficiency of PSCs. This composite material exhibits higher electron extraction capacity, better energy-level alignment, and more efficient carrier transport, while effectively passivating Pb2+ ions in perovskite films with NH2 groups, reducing charge recombination at ETL/perovskite interface.

CELL REPORTS PHYSICAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Simultaneous Improved Performance and Thermal Stability of Planar Metal Ion Incorporated CsPbI2Br All-Inorganic Perovskite Solar Cells Based on MgZnO Nanocrystalline Electron Transporting Layer

Sawanta S. Mali et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Vertical Phase Separated Cesium Fluoride Doping Organic Electron Transport Layer: A Facile and Efficient Bridge Linked Heterojunction for Perovskite Solar Cells

Jianxing Xia et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Perovskite Films with Reduced Interfacial Strains via a Molecular-Level Flexible Interlayer for Photovoltaic Application

Cong-Cong Zhang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

A Solution-Processed Dopant-Free Tin Phthalocyanine (SnPc) Hole Transport Layer for Efficient and Stable Carbon-Based CsPbI2Br Planar Perovskite Solar Cells Prepared by a Low-Temperature Process

Xiang Zhang et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Strain Release from the WS2/CsPbBr3van der Waals Heterostructure for 1.7 V Voltage All-Inorganic Perovskite Solar Cells

Qingwei Zhou et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Interfacial Dipole in Organic and Perovskite Solar Cells

Qi Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Review Chemistry, Physical

Inorganic perovskite solar cells based on carbon electrodes

Hailiang Wang et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

2D Cs2PbI2Cl2 Nanosheets for Holistic Passivation of Inorganic CsPbI2Br Perovskite Solar Cells for Improved Efficiency and Stability

Shaomin Yang et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Improved charge extraction through interface engineering for 10.12% efficiency and stable CsPbBr3 perovskite solar cells

Jingwei Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Energy & Fuels

Stabilization of Inorganic CsPb0.5Sn0.5I2Br Perovskite Compounds by Antioxidant Tea Polyphenol

Huaxia Ban et al.

SOLAR RRL (2020)

添加到收藏夹

Article Chemistry, Physical

An intermeshing electron transporting layer for efficient and stable CsPbI2Br perovskite solar cells with open circuit voltage over 1.3 V

Shuo Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Niobium Incorporation into CsPbI2Br for Stable and Efficient All-Inorganic Perovskite Solar Cells

Zhanglin Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability

Jingjing Tian et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Hao Wang et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

High-performance carbon electrode-based CsPbI2Br inorganic perovskite solar cell based on poly(3-hexylthiophene)-carbon nanotubes composite hole-transporting layer

Guiqiang Wang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient and Hole-Transporting-Layer-Free CsPbI2Br Planar Heterojunction Perovskite Solar Cells through Rubidium Passivation

Yixin Guo et al.

CHEMSUSCHEM (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel Molecular Doping Mechanism for n-Doping of SnO2 via Triphenylphosphine Oxide and Its Effect on Perovskite Solar Cells

Bao Tu et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

On the Current-Voltage Hysteresis in Perovskite Solar Cells: Dependence on Perovskite Composition and Methods to Remove Hysteresis

Dong-Ho Kong et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Poly(3-hexylthiophene)/zinc phthalocyanine composites for advanced interface engineering of 10.03%-efficiency CsPbBr3 perovskite solar cells

Yu Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Efficient and carbon-based hole transport layer-free CsPbI2Br planar perovskite solar cells using PMMA modification

Xiang Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

添加到收藏夹

Article Multidisciplinary Sciences

An Interlayer with Strong Pb-CI Bond Delivers Ultraviolet-Filter-Free, Efficient, and Photostable Perovskite Solar Cells

Pengjie Hang et al.

ISCIENCE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent progress of inorganic perovskite solar cells

Qidong Tai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

High-Efficiency Low-Temperature ZnO Based Perovskite Solar Cells Based on Highly Polar, Nonwetting Self-Assembled Molecular Layers

Randi Azmi et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interface Engineering for All-Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%

Lei Yan et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Controlled defects and enhanced electronic extraction in fluorine incorporated zinc oxide for high-performance planar perovskite solar cells

Wenjing Zhao et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Li dopant induces moisture sensitive phase degradation of an all-inorganic CsPbI2Br perovskite

Yihui Li et al.

CHEMICAL COMMUNICATIONS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Insights into Working Mechanism of Alkali Metal Fluorides as Dopants of ZnO Films in Inverted Polymer Solar Cells

Jing Qiu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

添加到收藏夹

Article Chemistry, Physical

Direct Evidence of Ion Diffusion for the Silver-Electrode-Induced Thermal Degradation of Inverted Perovskite Solar Cells

Jiangwei Li et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Solution-Processed Lithium-Doped ZnO Electron Transport Layer for Efficient Triple Cation (Rb, MA, FA) Perovskite Solar Cells

Md Arafat Mahmud et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

Fullerene-Free Organic Solar Cells with Efficiency Over 12% Based on EDTA-ZnO Hybrid Cathode Interlayer

Xiaodong Li et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells

Konrad Domanski et al.

ACS NANO (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells

Fabrizio Giordano et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Photovoltaic Performance of CH3NH3Pbl3 Perovskite Solar Cells through Interfacial Engineering Using Self-Assembling Monolayer

Lijian Zuo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Chemistry, Physical

Ethanedithiol Treatment of Solution-Processed ZnO Thin Films: Controlling the Intragap States of Electron Transporting Interlayers for Efficient and Stable Inverted Organic Photovoltaics

Sai Bai et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A dopant-free hole-transporting material for efficient and stable perovskite solar cells

Jian Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Surface modification with EDTA molecule: A feasible method to enhance the adsorption property of ZnO

Chong Sun et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2014)

添加到收藏夹

Article Chemistry, Physical

Inverted Polymer Solar Cells with Reduced Interface Recombination

Song Chen et al.

ADVANCED ENERGY MATERIALS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer

Yanming Sun et al.

ADVANCED MATERIALS (2011)

添加到收藏夹

Article Chemistry, Physical

Charge-transfer surface complex of EDTA-TiO2 and its effect on photocatalysis under visible light

Gonu Kim et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

A semi-transparent plastic solar cell fabricated by a lamination process

Jinsong Huang et al.

ADVANCED MATERIALS (2008)

添加到收藏夹

Review Materials Science, Multidisciplinary

ZnO - nanostructures, defects, and devices

Lukas Schmidt-Mende et al.

MATERIALS TODAY (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.