☆ 4.5 Article

Numerical study of beam oscillation and its effect on the solidification parameters and grain morphology in remote laser welding of high-strength aluminium alloys

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Numerical simulation of transport phenomena and its effect on the weld profile and solute distribution during laser welding of dissimilar aluminium alloys with and without beam oscillation

Anand Mohan et al.

Summary: Remote Laser Welding (RLW) of Aluminium alloys is important for lightweight manufacturing and understanding the physical processes during welding is critical for the mechanical performance of joints. A transient three-dimensional Finite Element (FE) based Multiphysics model was developed and validated to investigate the influence of beam oscillation on heat transfer, fluid flow, and material mixing. The study found that beam oscillation during welding creates an additional vortex, and increasing oscillation amplitude widens the welds but decreases penetration depth. Higher oscillation frequency increases the flow rate of molten metal, indicating increased mixing due to the churning action of the oscillating beam. Material mixing depends on diffusion and convection.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

添加到收藏夹

Article Automation & Control Systems

Numerical modelling of thermal quantities for improving remote laser welding process capability space with consideration to beam oscillation

Anand Mohan et al.

Summary: This research investigates the impact of welding process parameters and beam oscillation on weld thermal cycle during laser welding. A three-dimensional heat transfer model is developed to simulate the welding process. The results show that the developed model accurately predicts the thermal cycle and weld morphology. Parametric contour maps for peak temperature, HAZ volume, and cooling rate are developed to estimate the process capability space. An integrated approach based on intermediate performance indicators is proposed for rapid process assessment and refinement. The application of beam oscillation increases the process capability space and flexibility in process parameter selection.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

The impact of Adjustable-Ring-Mode (ARM) laser beam on the microstructure and mechanical performance in remote laser welding of high strength aluminium alloys

Tianzhu Sun et al.

Summary: This paper introduces the use of an adjustable-ring-mode (ARM) laser beam to optimize the microstructure and mechanical performance of laser welded high-strength aluminum alloy joints. The results show that the core/ring power ratio and beam oscillation width have significant effects on the weld geometry and grain refinement, leading to improvements in joint strength.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effect of beam oscillation on the fluid flow during laser welding

Anand Mohan et al.

Summary: In this study, a numerical model based on finite element method is developed to evaluate the heat transfer and fluid flow during laser welding process. The model considers a moving heat source and solves the fully coupled equations of incompressible fluid flow and heat transfer. A comparative study is conducted between non-oscillation and beam oscillation welding with the same heat input per unit length. The effects of Marangoni flow and thermal buoyancy are analyzed using dimensionless coefficients for mass and heat transport.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Engineering, Industrial

Effects of sinusoidal oscillating laser beam on weld formation, melt flow and grain structure during aluminum alloys lap welding

Lin Chen et al.

Summary: This study developed a numerical model to simulate the temperature distribution and melt flow in lap joints of 1.5 mm 6061/5182 aluminum alloys thin sheets under laser sinusoidal oscillation welding. The results showed that the sinusoidal oscillation homogenized energy distribution and reduced energy peak, resulting in tooth-shaped sectional formation. The laser sinusoidal oscillation produced defect-free welds with improved tensile strength compared to traditional SLW welds, mainly due to the wider equiaxed grain area and finer grain size.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Automation & Control Systems

Numerical modeling of fluid flow, heat, and mass transfer for similar and dissimilar laser welding of Ti-6Al-4V and Inconel 718

Amir Hossein Faraji et al.

Summary: This study presents a 3D finite volume numerical model to simulate fluid flow, heat, and mass transfer for similar and dissimilar laser welding of Ti-6Al-4V and Inconel 718. The heat source parameters were calibrated through comparison of simulated and experimental weld pool shapes and dimensions, and a systematic comparison was carried out through selected experiments. The results highlighted the significant effects of Marangoni forces and mass mixture in weld pool formation.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation

Lin Shi et al.

Summary: By investigating the suppression mechanism of keyhole-induced porosity in oscillating laser beam welding through numerical simulation and experimental verification, it was found that controlling the energy balance of the keyhole and melt pool can effectively reduce the weld porosity of 304 stainless steel. Additionally, two mechanisms were identified for porosity suppression: the stirring effect of the oscillating beam and the timely absorption of bubbles by the dynamic keyhole.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Heat transfer and fluid flow and their effects on the solidification microstructure in full-penetration laser welding of aluminum sheet

Shaoning Geng et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Automation & Control Systems

Fiber laser welding of AA 5754 in the double lap-joint configuration: process development, mechanical characterization, and monitoring

Matteo Garavaglia et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Effect of beam oscillation on microstructure and properties of laser-TIG hybrid welding of D406A ultra-high strength steel

Cong Chen et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Thermodynamics

Multi-physics multi-scale simulation of the solidification process in the molten pool during laser welding of aluminum alloys

Ping Jiang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Sinusoidal oscillating laser welding of 7075 aluminum alloy: Hydrodynamics, porosity formation and optimization

Tongtong Liu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reduction of the hot cracking susceptibility of laser beam welds in AlMgSi alloys by increasing the number of grain boundaries

Christian Hagenlocher et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimization of the solidification conditions by means of beam oscillation during laser beam welding of aluminum

Christian Hagenlocher et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Thermodynamics

A three-dimensional numerical simulation model for weld characteristics analysis in fiber laser keyhole welding

Yuewei Ai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of Laser Welding Parameters for Joining Ti Grade 2 and AW 5754 Aluminium Alloys Using Numerical Simulation

Maria Behulova et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Effect of Vibration during Friction Stir Welding on Corrosion Behavior, Mechanical Properties, and Machining Characteristics of Stir Zone

Sajad Fouladi et al.

METALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy

Lei Wang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Automation & Control Systems

The effect of laser beam wobbling mode in welding process for structural steels

Sergey V. Kuryntsev et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Industrial

Weld formation mechanism of fiber laser oscillating welding of austenitic stainless steel

Kangda Hao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Time-resolved X-ray diffraction studies of solidification microstructure evolution in welding

W. U. Mirihanage et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Engineering, Manufacturing

Three-Dimensional Modeling of Gas Metal Arc Welding of Aluminum Alloys

H. Guo et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)

添加到收藏夹

Article Engineering, Mechanical

The characteristics of high power fibre laser welding

A. Salminen et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical and experimental study of molten pool formation during continuous laser welding of AZ91 magnesium alloy

Kamel Abderrazak et al.

COMPUTATIONAL MATERIALS SCIENCE (2009)

添加到收藏夹

Article Transportation Science & Technology

Super Light Car—lightweight construction thanks to a multi-material design and function integration

Martin Goede et al.

European Transport Research Review (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.