☆ 4.7 Article

Assessing the Stability of Cable-Reinforced High Bedding Rock Slopes against Rotational Bi-planar Failure

ROCK MECHANICS AND ROCK ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article

Experimental and numerical investigation on the seismic response of slope reinforced by frame beam and anchor cable

Jiayong Niu et al.

Arabian Journal of Geosciences (2022)

添加到收藏夹

Article Engineering, Geological

Effect of Confining Pressure and Strain Rate on Mechanical Behaviors and Failure Characteristics of Sandstone Containing a Pre-existing Flaw

Wei You et al.

Summary: In this study, dynamic triaxial tests were conducted on sandstone containing a pre-existing flaw under different radial confining pressures and strain rates. The results showed that both the dynamic strength and energy dissipation density of the sandstone increased with increasing radial confining pressure and strain rate. The study also characterized the fragment distributions of the sandstone and revealed the fracturing mechanism of new cracks through microscopic observation.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Stability of expansive soil slopes reinforced with anchor cables based on rotational-translational mechanisms

Yan Cheng et al.

Summary: This study analyzed the stability of expansive soil slopes stabilized by pre-stressed anchor cables using the kinematic limit analysis theorem. An optimization method for the upper bound solution to slope stability was proposed and its applicability was demonstrated through comparison with published solutions. A case study was conducted to investigate the role of soil suction and anchor reinforcement in safety assessments of expansive soil slopes.

COMPUTERS AND GEOTECHNICS (2022)

添加到收藏夹

Article Environmental Sciences

Classification and distribution of large-scale high-position landslides in southeastern edge of the Qinghai-Tibet Plateau, China

Yifei Gong et al.

Summary: A model of landslide division system has been established in the southeastern margin of the Qinghai-Tibet Plateau, analyzing the distribution and failure modes of landslides in the area by considering rock mass structure and geo-mechanical action characteristics. By categorizing landslides into different types and defining typical failure modes, compatibility for studying the southeastern margin of the Qinghai-Tibet Plateau and other regions with similar geomorphic conditions has been provided.

ENVIRONMENTAL EARTH SCIENCES (2022)

添加到收藏夹

Article Engineering, Geological

Estimating the geological strength index and disturbance factor in the Hoek-Brown criterion using the acoustic wave velocity in the rock mass

Kaizong Xia et al.

Summary: This study develops a method to estimate GSI and D values using acoustic wave velocity, and proposes a new method for determining the mechanical parameters of the rock mass based on these improved values. The analysis results show that the method accurately reflects the factors affecting rock mass quality and disturbance, and its reliability is verified in practical engineering.

ENGINEERING GEOLOGY (2022)

添加到收藏夹

Article Engineering, Geological

Assessing the Stability of Dip Slopes Based on Analyzing the Stress at a Key Point on the Sliding Surface

Chaoyi Sun et al.

Summary: A novel method for assessing the potential of a dip slope to undergo bi-planar failure is proposed in this study. Discrete-element simulations and stress analysis are conducted to investigate the characteristics of the penetration process of the sliding surface and to assess the stability of the slope. The results show the feasibility and accuracy of the proposed method and reveal the progressive bi-planar failure process and its location in the stress reduction zone.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2022)

添加到收藏夹

Article Engineering, Civil

Stability analysis of slopes reinforced with anchor cables and optimal design of anchor cable parameters

Dong-Ping Deng et al.

Summary: This study proposes a new LE method for analyzing the stability of slopes reinforced with anchor cables, utilizing the nonlinear M-C strength criterion to describe shear failure of the slip surface. The feasibility of the method is verified through comparison of examples, showcasing its simplicity and ability to provide reasonable solutions without iterative calculations.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Investigation on the mechanism and control methods for roof collapse caused by cable bolt shear rupture

Wen-da Wu et al.

Summary: The study investigated the roof collapse accident at the No.15028 tailgate of XinJing coal mine in China, finding that insufficient pretension load on rock bolts led to horizontal displacement and vertical separation of rocks, ultimately causing roof collapse. Increasing the pretension load of rock bolts and developing mechanically compatible support systems can effectively reduce horizontal displacement of rocks and shear fracture risk of cable bolts.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Environmental

Numerical simulations of the failure process of anaclinal slope physical model and control mechanism of negative Poisson's ratio cable

Chun Zhu et al.

Summary: Researchers have established a numerical model and developed a numerical simulation model of NPR cables to simulate the slope failure process and the impact of cables on deformation. The numerical results show that NPR cables can absorb deformation energy and maintain stable resistance, preventing slope instability and driving the slope towards a new equilibrium state.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Engineering, Geological

A physical modeling-based study on the control mechanisms of Negative Poisson's ratio anchor cable on the stratified toppling deformation of anti-inclined slopes

Zhigang Tao et al.

Summary: This study investigates the mechanisms governing instability failure of anti-inclined slopes reinforced with NPR anchor cables, and obtains the evolution process of key parameters through physical model experiments. Furthermore, it proves that NPR anchor cables can be used to monitor the sliding force of anti-inclined slopes, laying a foundation for advanced instability warning technology.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

添加到收藏夹

Article Engineering, Geological

Analysis of Stability of Concealed Cataclinal Slopes with Talus Deposits Accumulated at Their Toes with Respect to Biplanar Failure

Chaoyi Sun et al.

Summary: This study focuses on the stability and biplanar failure of concealed cataclinal slopes with talus deposits accumulated at their toes (TDAT-CC slopes), proposing a new method to determine slope stability and predict failure surface. It was found that talus deposits at the toe of the slope act as a toe buttress improving slope stability, with the safety factor increasing as the inclination and height of the deposits increase. The results obtained offer a solid foundation for investigating biplanar failure in TDAT-CC slopes.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic analysis of anti-dip bedding rock slopes reinforced by pre-stressed cables using discrete element method

Yun Zheng et al.

Summary: Pre-stressed cables were found to be an effective method in controlling deformation and improving dynamic stability of ABRSs in earthquakes. Both reinforced and unreinforced ABRSs showed significant acceleration amplification from half of the slope height upwards. It is recommended to use a slight cable inclination and high pre-stressed force in seismic reinforcement design for ABRSs.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2021)

添加到收藏夹

Article Engineering, Geological

Limit-Equilibrium Analysis of Stability of Footwall Slope with Respect to Biplanar Failure

Chaoyi Sun et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

添加到收藏夹

Article Engineering, Geological

Experimental Investigation on Shear Mechanical Behavior of Sandstone Containing a Pre-existing Flaw Under Unloading Normal Stress with Constant Shear Stress

Da Huang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Limit analysis under seismic conditions of a slope reinforced with prestressed anchor cables

Minjia Yan et al.

COMPUTERS AND GEOTECHNICS (2019)

添加到收藏夹

Article Engineering, Geological

Characteristics of failure area and failure mechanism of a bedding rockslide in Libo County, Guizhou, China

Lianheng Zhao et al.

LANDSLIDES (2019)

添加到收藏夹

Article Engineering, Geological

Numerical and theoretical study of bi-planar failure in footwall slopes

Chaoyi Sun et al.

ENGINEERING GEOLOGY (2019)

添加到收藏夹

Article Engineering, Geological

Global method for stability analysis of anchored slopes

Tan Zhang et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2019)

添加到收藏夹

Article Engineering, Geological

Mechanism of the catastrophic June 2017 landslide at Xinmo Village, Songping River, Sichuan Province, China

Yunsheng Wang et al.

LANDSLIDES (2018)

添加到收藏夹

Article Engineering, Geological

The Vaiont landslide: re-assessment of the evidence leads to rejection of the consensus

Alan P. Dykes et al.

LANDSLIDES (2018)

添加到收藏夹

Article Engineering, Geological

ISRM Suggested Method for Determining the Basic Friction Angle of Planar Rock Surfaces by Means of Tilt Tests

L. R. Alejano et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

A Benchmark Experiment to Assess Factors Affecting Tilt Test Results for Sawcut Rock Surfaces

L. R. Alejano et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

添加到收藏夹

Article Engineering, Environmental

An investigation on the mechanisms of instabilities and safe design of the south slope at a lignite pit (SW Turkey) based on a sensitivity approach

Kemal Cem Solak et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2017)

添加到收藏夹

Article Engineering, Geological

Behavior of Fiber Glass Bolts, Rock Bolts and Cable Bolts in Shear

Xuwei Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

添加到收藏夹

Article Engineering, Geological

Analytical model of shear behaviour of a fully grouted cable bolt subjected to shearing

Xuwei Li et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

添加到收藏夹

Article Engineering, Geological

The possible role of brittle rock fracture in the 1963 Vajont Slide, Italy

Mohsen Havaej et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

添加到收藏夹

Review Geosciences, Multidisciplinary

A critical review of rock slope failure mechanisms: The importance of structural geology

Doug Stead et al.

JOURNAL OF STRUCTURAL GEOLOGY (2015)

添加到收藏夹

Article Engineering, Geological

Characterization of bi-planar and ploughing failure mechanisms in footwall slopes using numerical modelling

Mohsen Havaej et al.

ENGINEERING GEOLOGY (2014)

添加到收藏夹

Article Engineering, Geological

Limit analysis of the stability of slopes reinforced with anchors

Xinpo Li et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2012)

添加到收藏夹

Article Engineering, Geological

Comparison of limit-equilibrium, numerical and physical models of wall slope stability

L. R. Alejano et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)

添加到收藏夹

Article Engineering, Geological

Mechanism on apparent dip sliding of oblique inclined bedding rockslide at Jiweishan, Chongqing, China

Yueping Yin et al.

LANDSLIDES (2011)

添加到收藏夹

Article Engineering, Geological

Developments in the characterization of complex rock slope deformation and failure using numerical modelling techniques

D Stead et al.

ENGINEERING GEOLOGY (2006)

添加到收藏夹

Article Engineering, Geological

Slope instability mechanisms in dipping interbedded conglomerates and weathered marls - the 1999 Rufi landslide, Switzerland

E Eberhardt et al.

ENGINEERING GEOLOGY (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.