4.5 Article

Structural, conductivity, mechanical and wettability properties of copper alumina reinforced chlorinated polyethylene/polyvinyl chloride blend nanocomposites

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Composites

Insights into structural, thermal, electrical and mechanical properties of copper alumina reinforced chlorinated natural rubber nanocomposites

K. Parvathi et al.

Summary: This research aimed to fabricate low-cost and highly durable conducting rubber products by incorporating copper alumina nanocomposites into chlorinated natural rubber. The results showed that the addition of nanoparticles significantly improved the electrical conductivity and hardness, while reducing the elongation at break and resilience. These improvements are important for the design of flexible flame retardant electronic devices, electromagnetic induction shielding, and conducting adhesive materials.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

Article Polymer Science

Flexible Conductive Nanocomposites for Electrochemical Devices Based on Chlorinated Natural Rubber/Nickel Oxide Nanoparticles

K. Parvathi et al.

Summary: This study investigated the structural, thermal, and temperature-dependent electrical properties of flexible conductive chlorinated natural rubber with various contents of nickel oxide nanoparticles. The addition of nanoparticles improved the thermal stability, dielectric properties, and AC electrical conductivity of the composites. The study emphasized the importance of interfacial interaction between the fillers and rubber chain for network formation.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2022)

Article Polymer Science

Enhanced optical, thermal and electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites for flexible electrochemical devices

K. Parvathi et al.

Summary: This work investigates the optical, thermal stability, and temperature-dependent electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites. The insertion of zinc ferrite into the rubber matrix leads to a decrease in bandgap energy. The nanocomposites exhibit enhanced thermal stability and electrical properties compared to the parent polymer. Additionally, the conductivity of the nanocomposites shows a non-ohmic behavior, indicating a dynamic relaxation process. The experimental results are in good agreement with theoretical models, suggesting the presence of interfacial interactions in the nanocomposites. These findings are significant for the development of highly-durable flexible electronic devices, actuators, supercapacitors, and elastomeric pressure sensors.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2022)

Article Engineering, Chemical

Synthesis, characterization, conductivity, and gas-sensing performance of copolymer nanocomposites based on copper alumina and poly(aniline-co-pyrrole)

S. Sankar et al.

Summary: A series of copolymer nanocomposites based on poly(aniline-co-pyrrole) with different contents of copper alumina nanoparticles were synthesized and characterized. The presence and dispersion of nanoparticles in the copolymer matrix were confirmed, and the flexibility of the polymer was reduced with an increase in glass transition temperature. The nanocomposites exhibited increased hopping of charge carriers and excellent gas sensing properties. These nanocomposites have the potential for developing nano-electronic devices.

POLYMER ENGINEERING AND SCIENCE (2022)

Article Polymer Science

Enhanced dielectric properties, thermal stability and ammonia sensing performance of poly(diphenylamine)/zinc oxide nanocomposites via one step polymerization

Furhan et al.

Summary: PDPA/ZnO nanocomposites synthesized by in-situ chemical polymerization technique exhibit enhanced thermal stability and electrical conductivity, showing improved NH3 gas sensing characteristics with higher ZnO nanoparticle concentrations.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Article Chemistry, Multidisciplinary

Optical, thermal and temperature dependent electrical properties of chlorinated natural rubber/copper alumina nanocomposites for flexible electrochemical devices

K. Parvathi et al.

Summary: This investigation focuses on the optical, thermal, and dielectric properties of chlorinated natural rubber/copper alumina nanocomposites. The study found that these nanocomposites have significant potential for being used in the fabrication of flexible dielectric materials.

RESEARCH ON CHEMICAL INTERMEDIATES (2022)

Article Engineering, Mechanical

Prediction of Tribological Properties of Alumina-Coated, Silver-Reinforced Copper Nanocomposites Using Long Short-Term Model Combined with Golden Jackal Optimization

Ismail R. Najjar et al.

Summary: This study presented a newly modified machine learning model to predict the tribological performance of Cu-Al2O3 nanocomposites, which were developed using electroless coating of Al2O3 nanoparticles with Ag, ball milling, and compaction. It was found that adding 10% Al2O3 significantly enhanced the hardness and wear rates of the composites. The developed LSTM-GJO algorithm showed excellent predictability of the wear rate and coefficient of friction for all considered composites.

LUBRICANTS (2022)

Article Engineering, Electrical & Electronic

Studies on optical properties, thermal stability and electrical conductivity of copper alumina nanoparticles-reinforced Poly(pyrrole-co-indole) for optoelectronic devices

S. Sankar et al.

Summary: This study investigated the impact of copper alumina (Cu-Al2O3) nanoparticles in poly(pyrrole-co-indole) (PPy-co-PIN) on various properties. The results showed that 5 wt% nanocomposite exhibited the best performance in terms of optical and electrical properties compared to the pristine material.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Article Chemistry, Multidisciplinary

Optical and electrical properties of copper alumina nanoparticles reinforced chlorinated polyethylene composites for optoelectronic devices

S. Suvarna et al.

Summary: This study focused on the optical, thermal, electrical, and dielectric properties of chlorinated polyethylene/copper alumina (CPE/Cu-Al2O3) nanocomposites. The incorporation of Cu-Al2O3 nanoparticles into the CPE matrix improved the properties of the nanocomposites. 7 wt% Cu-Al2O3 loaded sample exhibited the best performance.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

Article Engineering, Chemical

High performance optical and electrical properties of zinc oxide reinforced poly(diphenylamine) nanocomposites for optoelectronic applications

Furhan et al.

Summary: Polymer nanocomposites with good properties were synthesized by incorporating zinc oxide nanoparticles into a poly(diphenylamine) matrix. The addition of nanoparticles improved the optical, crystalline, morphological, thermal, dielectric, and electrical properties of the nanocomposites.

POLYMER ENGINEERING AND SCIENCE (2022)

Article Chemistry, Multidisciplinary

Copper alumina @ poly (aniline-co-indole) nanocomposites: synthesis, characterization, electrical properties and gas sensing applications

S. Sankar et al.

Summary: Poly(aniline-co-indole)/copper alumina (PANI-co-PIN/Cu-Al2O3) nanocomposites with excellent AC conductivity, dielectric properties, and gas sensing capabilities were synthesized via in situ chemical oxidative polymerization. The successful encapsulation of Cu-Al2O3 nanoparticles in the copolymer was confirmed, and the nanocomposites showed improved electrical and gas sensing properties.

RSC ADVANCES (2022)

Article Polymer Science

Synthesis, spectral, thermal studies and dielectric behavior of functionalized TiO2-loaded diglycidyl epoxy nanocomposite film

P. Nisha et al.

Summary: The study investigated the dielectric and thermal behavior of 4-aminobutyltriethoxysilane-functionalized TiO(2)nanoparticle-loaded epoxy resin nanocomposites. Characterization techniques such as FT-IR, SEM, and AFM were used to analyze the chemical bonding between fillers and epoxy resin, as well as the dispersion of nanoparticles in the epoxy matrix. The results showed that loading epoxy resins with TiO2-ABTES enhanced the electrical and thermal properties of the epoxy resin.

POLYMER BULLETIN (2021)

Article Engineering, Multidisciplinary

Prediction of mechanical properties of graphite nanoflake/ polydimethylsiloxane nanocomposites as affected by processing method

Seulki Ha et al.

Summary: This study investigates the impact of manufacturing processes on porosity and mechanical properties of nanocomposites. It is found that the evolution of porosity is best modeled with the logistic function, and prediction models for mechanical properties are established based on this. The proposed models are in good agreement with experimental data.

COMPOSITES PART B-ENGINEERING (2021)

Article Physics, Multidisciplinary

Exploration of alternating current conduction mechanism and dielectric relaxation with Maxwell-Wagner effect in NiO-CdO-Gd2O3 nanocomposites

S. Karmakar et al.

Summary: Our study synthesized NiO-CdO-Gd2O3 nanoclusters via sol-gel autocombustion route and investigated its structural, morphological, and dielectric properties with temperature and frequency variations. The nanocomposites exhibited high dielectric permittivity, which was attributed to interface polarization and contributions from grain and grain boundaries. The XRD, FTIR, and EDX analyses confirmed the elemental composition and vibrational modes of the metal oxides in the nanoclusters.

EUROPEAN PHYSICAL JOURNAL PLUS (2021)

Article Polymer Science

Conductive and antibacterial cellulose nanofibers decorated with copper nanoparticles for potential application in wearable devices

Nadir Hussain et al.

Summary: This study presents a simple method to fabricate electrically conductive cellulose nanofibers by utilizing electrospinning and electroless deposition techniques. Through optimizing the processing parameters, nanofibers with enhanced conductivity were obtained.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Polymer Science

Characterization, Optical and Conductivity Study of Nickel Oxide Based Nanocomposites of Polystyrene

S. S. El-Khiyami et al.

Summary: In this study, different concentrations of nickel oxide (NiO) nanoparticles were successfully incorporated into a polystyrene (PS) polymer matrix using the solution casting method. Various characterization techniques were used to analyze the nanocomposites, revealing a strong interaction between PS and NiO nanoparticles. Increasing the nanofiller content improved the absorbance of the nanocomposites and raised the refractive index values, indicating potential applications in photonic devices and optical design. Moreover, the electrical conductivity of the nanocomposites was significantly enhanced due to the uniform dispersion of NiO nanoparticles and increasing content, achieving conduction through correlated barrier hopping (CBH).

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Effects of ZrO2 nanoparticle content on microstructure and wear behavior of titanium matrix composite

M. S. Abd-Elwahed et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Engineering, Environmental

ZnO-PVA Polymer Matrix with Transition Metals Oxide Nano-fillers for High Dielectric Mediums

Tahir Iqbal et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

Article Materials Science, Multidisciplinary

A conductive mechanism of PVA (Mowiol 10-98) filled with ZnO and MWCNT nanoparticles

N. B. Rithin Kumar et al.

BULLETIN OF MATERIALS SCIENCE (2019)

Review Materials Science, Multidisciplinary

Flame retardant nanocomposites based on 2D layered nanomaterials: a review

Xiaopeng Yue et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Materials Science, Multidisciplinary

Thermomechanical and dielectric properties of novel pyridine-based polyurethane urea elastomers

Stefan Oprea et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2018)

Article Chemistry, Multidisciplinary

Surface morphology and active sites of TiO2 for photoassisted catalysis

Bhaskar Soman et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2018)

Article Materials Science, Composites

The effects of nano-silica/nano-alumina on fatigue behavior of glass fiber-reinforced epoxy composites

A. Fathy et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

Article Materials Science, Multidisciplinary

Effect of Zn(NO3)2 filler on the dielectric permittivity and electrical modulus of PMMA

P. Maji et al.

BULLETIN OF MATERIALS SCIENCE (2015)

Article Chemistry, Multidisciplinary

Properties study of poly-L-lactic acid)/poly(γ-benzyl L-glutamate)-graft-poly(ethylene glycol) blend film

Guoquan Zhu et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2015)

Article Materials Science, Multidisciplinary

Dielectric properties of conductive polypyrrole/ethylene vinyl acetate copolymer blends

F. S. Shokr et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2014)

Article Chemistry, Multidisciplinary

Modification of hydrophilic poly(vinyl alcohol) film via blending with hydrophobic poly(butyl acrylate-co-methyl methacrylate)

Guoquan Zhu et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2014)

Review Chemistry, Physical

Metal oxide hollow nanostructures: Fabrication and Li storage performance

Wei Wei et al.

JOURNAL OF POWER SOURCES (2013)

Article Materials Science, Multidisciplinary

Synthesis and antimicrobial activity of copper nanoparticles

Jeyaraman Ramyadevi et al.

MATERIALS LETTERS (2012)

Article Polymer Science

Effects of SiO2 and Al2O3 Nanofillers on Polyethylene Properties

Denis Panaitescu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Article Chemistry, Multidisciplinary

PREPARATION AND PROPERTIES OF DIFFERENT FUNCTIONAL GROUP CONTAINING STYRENE BUTADIENE RUBBER

M. T RAMESAN et al.

JOURNAL OF THE CHILEAN CHEMICAL SOCIETY (2009)

Article Polymer Science

Mechanical properties of recycled PVC blends with styrenic polymers

David Garcia et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

Article Materials Science, Multidisciplinary

Surface modification of nanoscale fillers for improving properties of polymer nanocomposites: a review

M. Z. Rong et al.

MATERIALS SCIENCE AND TECHNOLOGY (2006)

Article Materials Science, Composites

Electrical conduction and percolation behavior of carbon nanotubes/UPR nanocomposites

Shi-Hong Wu et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)

Article Materials Science, Characterization & Testing

Improvement of the properties of polyethylene with chlorinated polyethylene (CPE)

K Marossy et al.

POLYMERS & POLYMER COMPOSITES (2003)