☆ 4.5 Article

Numerical investigations on mechanical properties of bio-inspired 3D printed geometries using multi-jet fusion process

RAPID PROTOTYPING JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Evolution of temperature and residual stress behavior in selective laser melting of 316L stainless steel across a cooling channel

Hamaid Mahmood Khan et al.

Summary: This study aims to investigate the influence of cooling channels on the thermal and residual stress behavior of the selective laser melting (SLM) 316L uni-layer thermo-mechanical model. The findings show that the high heat dissipation of the solid base due to high cooling rates can interact with smaller melt pool temperature and size. Additionally, residual stresses are lower when the laser scanning is perpendicular to the cooling channel and larger scan spacings increase residual stresses.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Optics

Evolution of residual stress behavior in selective laser melting (SLM) of 316L stainless steel through preheating and in-situ re-scanning techniques

Saad Waqar et al.

Summary: The premature fractures, cracks, distortions, and delamination in selective laser melting manufactured components are among the most prominent challenges. Residual stresses are the main causes of these issues. Post processing techniques are commonly used to reduce these stresses, but they increase production time and costs. Therefore, developing in-process techniques to reduce residual stresses is crucial for large-scale production of metallic components.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Review Engineering, Mechanical

A critical review of 3D printing and digital manufacturing in construction engineering

Md. Hazrat Ali et al.

Summary: 3D printing technologies have brought great potentials and benefits to the construction industry, including process automation, resource saving, and improved efficiency. Current research focuses on material performance and the development of new techniques, with the need for further exploration on the applications of 3D printing in different sectors of construction.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Biomedical

Optimisation of the additive manufacturing parameters of polylactic acid (PLA) cellular structures for biomedical applications

David Myers et al.

Summary: This study optimized the FDM additive manufacturing process parameters to achieve the best geometric accuracy and mechanical performance for different lattice structures. The Schoen Gyroid structure exhibits higher compressive strength and elastic modulus compared to the Schwarz Primitive structure under the same porosity and manufacturing parameters.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

添加到收藏夹

Article Engineering, Biomedical

Mechanical performance of additively manufactured cobalt-chromium-molybdenum auxetic meta-biomaterial bone scaffolds

Chameekara T. Wanniarachchi et al.

Summary: Auxetic meta-biomaterials exhibit unconventional strain behavior and mechanical properties different from traditional biomaterials. This paper proposes a framework for the development of CoCrMo auxetic meta-biomaterials suitable for load-bearing bone scaffolds. The mechanical performance of five CoCrMo scaffolds with different Poisson's ratio and porosity was evaluated, and the best performing scaffold architectures were identified. The results show that the elastic modulus, yield stress, and Poisson's ratio of auxetic meta-biomaterials are primarily influenced by the underlying meta-cellular architecture.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

添加到收藏夹

Review Engineering, Mechanical

Opportunities and challenges in additive manufacturing used in space sector: a comprehensive review

Kashif Ishfaq et al.

Summary: This study explores the applications of 3D printing in space sectors and highlights the potential research gap in the current field of study. The authors provide insights into the manufacturing of various components under space conditions, challenges, and opportunities for additive manufacturing in space.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Manufacturing

Material Extrusion Additive Manufacturing of Poly(Lactic Acid): Influence of infill orientation angle

Wilco M. H. Verbeeten et al.

Summary: The effect of infill orientation angle on the strain-rate dependence of yield stress for ME-AM PLA material was investigated. The study found that the orientation of the infill significantly affected the mechanical properties of the ME-AM material.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Biomedical

Development of an architecture-property model for triply periodic minimal surface structures and validation using material extrusion additive manufacturing with polyetheretherketone (PEEK)

Hannah Spece et al.

Summary: This study investigates the relationship between design parameters and structural properties of triply periodic minimal surface structures, and validates a model of their architecture-property relationship. Experimental results show that mechanical properties decrease with increasing porosity, and failure occurs due to strut bending and interlayer debonding.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

添加到收藏夹

Article Engineering, Manufacturing

The effect of conformal cooling channels on welding process in parts produced by additive manufacturing, laser powder bed fusion

Cemal Irfan Caliskan et al.

Summary: Additive manufacturing has provided an unprecedented approach for industrial applications. By incorporating a conformal cooling channel network on weld plates, the performance of weld joints can be significantly improved, resulting in increased hardness and reduced residual stress.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Engineering, Manufacturing

3D direct-write printing of water soluble micromoulds for high-resolution rapid prototyping

Saja Aabith et al.

Summary: Direct-write printing has been instrumental in additive manufacturing, especially in extrusion-based printing, expanding the range of materials and applications. However, the synthesis and preparation of printing inks for direct-write printing can be complex. This study develops a precise 3D printable polymer that allows for the easy prototyping of micrometre-scale silicone structures without the need for cleanroom facilities.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V

S. L. Lu et al.

Summary: This study investigates the effects of post-heat treatments on the mechanical properties of laser powder bed fusion (L-PBF) additive manufactured Ti6Al4V components. It is found that the L-PBF hereditary basket-weave microstructure exhibits superior tensile properties.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical behaviors regulation of triply periodic minimal surface structures with crystal twinning

Yanhong Zhang et al.

Summary: This study proposes a strategy to manipulate stress transfer path through crystal twinning to achieve a designable deformation behavior of triply periodic minimal surface structures. By introducing twin boundaries in the ideal structures, the structure can be effectively protected and the deformation behavior can be regulated.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Biomedical

Rapid and mass manufacturing of soft hydrogel microstructures for cell patterns assisted by 3D printing

Chaofan He et al.

Summary: This study presents a novel method for rapid and mass fabrication of cell patterns using high-precision 3D printing and thermal-photo-crosslinking. Customized hydrogel patterns with specific features can be created stably and at low cost. This method has great potential for cell ethology and tissue repair.

BIO-DESIGN AND MANUFACTURING (2022)

添加到收藏夹

Review Engineering, Biomedical

Application of additively manufactured 3D scaffolds for bone cancer treatment: a review

Yanhao Hou et al.

Summary: Bone cancer is a global health problem with increasing clinical and economic burdens. Current treatment methods have limitations, but advanced materials and additive manufacturing offer promising solutions for both treatment and bone regeneration.

BIO-DESIGN AND MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Biomedical

Additively manufactured biomorphic cellular structures inspired by wood microstructure

Chukwuzubelu Okenwa Ufodike et al.

Summary: This study investigated the mechanical behavior and energy absorption capabilities of novel Biomorphic Cellular Structures inspired by the microstructure of cedar, oak, and palm wood using Additive Manufacturing technology, experimental testing, and Finite Element Analysis. The results showed that cedar-bcs provided the best mechanical performance compared to the other two biomorphic cellular structures.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Industrial

Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion

Chao Cai et al.

Summary: A systematic comparison of polyamide 12 (PA12) parts printed by Selective Laser Sintering (SLS) and Multi Jet Fusion (MJF) techniques revealed that MJF-printed specimens had slightly stronger mechanical strength and smoother front and side surfaces than SLS-printed counterparts.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Biomedical

Bioinspired energy absorbing material designs using additive manufacturing

Aniket Ingrole et al.

Summary: Nature provides biological materials and structures with exceptional energy absorption capabilities, inspiring the design and manufacture of novel material architectures to address engineering problems requiring high energy absorption capabilities. Researchers are advancing the field of bioinspired material design using iterative design approaches based on hierarchical architectural features of biological materials.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Review Engineering, Biomedical

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta et al.

Summary: 3D printing technology has emerged as a promising alternative for fabricating microfluidic devices, overcoming limitations associated with conventional methods. Different manufacturing approaches, along with a wide range of additive manufacturing materials and recent research advancements, have helped address challenges in 3D printed microfluidic devices. Possible implications of 3D printed microfluidics in healthcare, such as in vitro disease modeling, organ modeling, drug development, personalized cancer treatment, and cancer drug screening, are discussed, along with future research directions.

BIO-DESIGN AND MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bioinspired structures for core sandwich composites produced by fused deposition modelling

J. Bru et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Comparison between the properties of polyamide 12 and glass bead filled polyamide 12 using the multi jet fusion printing process

Heather J. O'Connor et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strength and toughness enhancement in 3d printing via bioinspired tool path

Yuxuan Sun et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Chemistry, Analytical

Electrohydrodynamic jet 3D printing of PCL/PVP composite scaffold for cell culture

Kai Li et al.

TALANTA (2020)

添加到收藏夹

Article Engineering, Manufacturing

Build orientation effects on mechanical properties and porosity of polyamide-11 fabricated via multi jet fusion

Kok Peng Marcian Lee et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

An evolutionary design approach to shell-infill structures

Wenke Qiu et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid

Bandar Aloyaydi et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Engineering, Mechanical

Accuracies of 3D printers with hard and soft materials

Taehun Kim et al.

RAPID PROTOTYPING JOURNAL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Polymeric structure with embedded fiber Bragg grating sensor manufactured using multi-jet printing method

Magdalena Mieloszyk et al.

MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Mechanical

Dimensional capability of selected 3DP technologies

Younss Ait Mou et al.

RAPID PROTOTYPING JOURNAL (2019)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Simple filling patterns to model mechanical behaviour of FDM's test pieces under torsion

M. Berzal et al.

MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)

添加到收藏夹

Article Materials Science, Composites

A numerical study to analyse the strength and stiffness of hollow cylindrical structures comprising sandwich fibre reinforced plastic composites

Daiva Zeleniakiene et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

添加到收藏夹

Review Engineering, Biomedical

Understanding the mechanical behaviour of human enamel from its structural and compositional characteristics

Li Hong He et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.