4.4 Article

Al, Zr dual-doped cobalt-free nickel-rich cathode materials for lithium-ion batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Competitive Doping Chemistry for Nickel-Rich Layered Oxide Cathode Materials

Yu-Jie Guo et al.

Summary: Chemical modification of electrode materials by heteroatom dopants is crucial for improving storage performance in rechargeable batteries. This study investigates the competitive doping chemistry of boron and aluminum in nickel-rich cathode materials. The atomic radii difference between B and Al leads to different spatial configurations of bonding with lattice oxygen. The findings provide insights into stabilizing the structural evolution and surface chemistry of the cathode.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Physical

A new boundary condition forging the unprecedented self-consistence of galvanostatic intermittent titration technique

Xinxin Tan et al.

Summary: The introduction of a new indicator and boundary condition optimization method in GITT measurements can address the issues and improve the self-consistency of the results.

SOLID STATE IONICS (2022)

Article Chemistry, Physical

An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes

Xingyu Qu et al.

Summary: An integrated surface coating/doping strategy has been developed to improve the structural stability and electrochemical performance of high-nickel layered oxides, leading to enhanced cycling stability and capacity retention of batteries. The strategy involves diffusion of titanium ions from a thin coating layer, formation of a protective layer on the material surface, and Ti4+ doping to enhance lithium ion diffusion and reduce side reactions, ultimately benefiting the cycling stability of the cathode.

NANO ENERGY (2022)

Article Materials Science, Multidisciplinary

Modulating precursor nanosheets for stabilized Ni-rich cathode material for Li-ion batteries

He-Kang Zhu et al.

RARE METALS (2022)

Article Multidisciplinary Sciences

Enabling high energy lithium metal batteries via single-crystal Ni-rich cathode material co-doping strategy

Xing Ou et al.

Summary: Researchers have developed an Al/Zr co-doped single-crystalline cathode material that improves the structural stability and performance of lithium-based battery systems.

NATURE COMMUNICATIONS (2022)

Editorial Material Chemistry, Physical

A Rising Tide of Co-Free Chemistries for Li-Ion Batteries

Yang-Kook Sun

ACS ENERGY LETTERS (2022)

Article Chemistry, Applied

B-doped and La4NiLiO8-coated Ni-rich cathode with enhanced structural and interfacial stability for lithium-ion batteries

Lingjun Li et al.

Summary: Ni-rich layered oxides are promising cathodes for advanced lithium-ion batteries, but their structural and interfacial stability issues hinder practical application. In this study, a B-doped and La4NiLiO8-coated LiNi0.825Co0.115Mn0.06O2 cathode was synthesized using a one-step method, and the dual-modification strategy significantly improved the stability of the structure and interface, leading to excellent cycling performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Multidisciplinary Sciences

Compositionally complex doping for zero-strain zero-cobalt layered cathodes

Rui Zhang et al.

Summary: By using a new compositionally complex doping strategy, researchers have successfully fabricated a high-Ni, zero-Co layered cathode with extremely high thermal and cycling stability. The cathode exhibits nearly zero volumetric change, greatly reducing lattice defects and local strain-induced cracks. This study is of great significance for addressing the safety and stability concerns of high-Ni, zero-Co cathode materials.

NATURE (2022)

Article Energy & Fuels

Introducing high-valence elements into cobalt-free layered cathodes for practical lithium-ion batteries

Geon-Tae Park et al.

Summary: Eliminating cobalt from nickel-rich layered cathodes is crucial for reducing material cost and promoting sustainable development of Li-ion batteries. By adding 1 mol% molybdenum, the Li(Ni0.89Mn0.1Mo0.01)O-2 cathode exhibits improved performance in terms of capacity and cycling stability, thanks to grain size refinement and enhanced cation ordering.

NATURE ENERGY (2022)

Article Chemistry, Physical

The surface double-coupling on single-crystal LiNi0.8Co0.1Mn0.1O2 for inhibiting the formation of intragranular cracks and oxygen vacancies

Yunjian Liu et al.

Summary: A double coupling of surface coating and doping is used to improve the cycling performance and capacity retention of the single-crystal LiNi0.8Co0.1Mn0.1O2 cathode material. This study demonstrates the critical pathway for the further development of single-crystal ternary cathode materials.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Nickel-rich and cobalt-free layered oxide cathode materials for lithium ion batteries

Yu-hong Luo et al.

Summary: This review comprehensively summarizes the development of nickel-rich and cobalt-free cathode materials, highlighting their competitive advantages in reducing costs and increasing energy density. It emphasizes the importance of developing new materials and provides solutions and future research directions to address current deficiencies in this field.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Enhancing Thermal and High-Voltage Cycling Stability of Ni-Rich Layered Cathodes through a Ti-Doping-Induced Surface-Disordered Structure

Hong Zhang et al.

Summary: Ni-rich layered oxide cathodes have limitations in thermal stability and cycling stability. Researchers have proposed a modification strategy by constructing a surface-disordered structure to improve the stability of cathode materials under high voltage and high temperature conditions.

ACS APPLIED ENERGY MATERIALS (2022)

Article Engineering, Environmental

Dual cationic modified high Ni-low co layered oxide cathode with a heteroepitaxial interface for high energy-density lithium-ion batteries

Sidra Jamil et al.

Summary: The study demonstrates that dual cation doping with Zirconium and Gallium significantly enhances the electrochemical performance of high Ni-low Co cathodes, leading to better cyclability and capacity retention for NCMZG compared to traditional NCM.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Improving the Structure Stability of LiNi0.8Co0.15Al0.05O2 by Double Modification of Tantalum Surface Coating and Doping

Xiaoyun Zhang et al.

Summary: The study applied a one-step high-temperature solid-phase sintering method to form a Ta2O5 protective layer on the surface of high-nickel materials, significantly enhancing the structural stability and improving the cycling performance of NCA at high rates.

ACS APPLIED ENERGY MATERIALS (2021)

Article Environmental Studies

When subterranean slavery supports sustainability transitions? power, patriarchy, and child labor in artisanal Congolese cobalt mining

Benjamin K. Sovacool

Summary: This study critically examines power, patriarchy, and child labor in the cobalt mining industry in the Democratic Republic of the Congo through the lens of modern slavery, dispossession, and gendering. It reveals a exploitation of ASM miners by various actors, gendered vulnerabilities in mining, and patterns of child labor and abuse. The study also proposes policy reforms aimed at positive change in the industry.

EXTRACTIVE INDUSTRIES AND SOCIETY-AN INTERNATIONAL JOURNAL (2021)

Article Materials Science, Multidisciplinary

A highly stabilized Ni-rich NCA cathode for high-energy lithium-ion batteries

Hoon-Hee Ryu et al.

MATERIALS TODAY (2020)

Article Chemistry, Physical

Cobalt-Free High-Capacity Ni-Rich Layered Li[Ni0.9Mn0.1]O2 Cathode

Assylzat Aishova et al.

ADVANCED ENERGY MATERIALS (2020)

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Article Materials Science, Multidisciplinary

The effect of gallium substitution on the structure and electrochemical performance of LiNiO2 in lithium-ion batteries

David Kitsche et al.

MATERIALS ADVANCES (2020)

Article Multidisciplinary Sciences

Lattice doping regulated interfacial reactions in cathode for enhanced cycling stability

Lianfeng Zou et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Simultaneously Dual Modification of Ni-Rich Layered Oxide Cathode for High-Energy Lithium-Ion Batteries

Huiping Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Electrochemistry

Is Cobalt Needed in Ni-Rich Positive Electrode Materials for Lithium Ion Batteries?

Hongyang Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Chemistry, Physical

Enabling high rate performance of Ni-rich layered oxide cathode by uniform titanium doping

Huabin Sun et al.

MATERIALS TODAY ENERGY (2019)

Article Chemistry, Physical

Cation Ordering of Zr-Doped LiNiO2 Cathode for Lithium-Ion Batteries

Chong S. Yoon et al.

CHEMISTRY OF MATERIALS (2018)

Article Chemistry, Multidisciplinary

Preparation and Characterization of the LiNi0.8Co0.1Mn0.1O2 Cathode Active Material by Electrophoretic Deposition

Youn Cheol Joe et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)

Article Chemistry, Physical

Self-Passivation of a LiNiO2 Cathode for a Lithium-Ion Battery through Zr Doping

Chong S. Yoon et al.

ACS ENERGY LETTERS (2018)

Article Green & Sustainable Science & Technology

Lithium-ion battery recycling processes: Research towards a sustainable course

Linda Gaines

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2018)

Article Materials Science, Multidisciplinary

Li-ion battery materials: present and future

Naoki Nitta et al.

MATERIALS TODAY (2015)

Article Chemistry, Physical

Estimation of electronegativity values of elements in different valence states

Keyan Li et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2006)