4.7 Article

Investigation on energy-saving extractive distillation for recovering ethanol and 1,4-dioxane from wastewater

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Design and evaluation of energy-saving total distillation separation of N, N-Dimethylacetamide/acetic acid/water

Nan Hu et al.

Summary: This study proposes three methods, including extractive pressure swing distillation, azeotropic-pressure swing distillation, and azeotropic-extractive distillation, to separate DMA-HAc-water ternary mixtures. The heat integration enhancement configuration is also completed, and the results indicate that the heat-integrated azeotropic-extractive distillation (HIAED) process has more significant industrial application potential.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Chemical

Energy-efficient recovery of tetrahydrofuran and ethyl acetate by triple-column extractive distillation: entrainer design and process optimization

Ao Yang et al.

Summary: An energy-efficient triple-column extractive distillation process is developed for recovering tetrahydrofuran and ethyl acetate from industrial effluent. Through a rigorous hierarchical design procedure and heat integration, the process shows improved process economics.

FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING (2022)

Article Green & Sustainable Science & Technology

Economic effect of an efficient and environmentally friendly extractive distillation/pervaporation process on the separation of ternary azeotropes with different compositions

Hongru Zhang et al.

Summary: The separation performance and economic cost of single extractive distillation and an extractive distillation coupled pervaporation process for ternary azeotropic systems with different feed compositions were studied. It was found that the cost of the processes increases significantly with increasing water content in the feed composition.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Engineering, Environmental

Design and control of side-stream extractive distillation to separate acetic acid and from wastewater

Jiyan Liu et al.

Summary: This paper analyzes the feasibility of recycling acetic acid and cyclohexanone from wastewater and proposes a method to prevent remixing effect in extractive distillation. The results show that the single liquid side-stream extractive distillation configuration is the optimal choice and the model predictive control structure performs the best in control effectiveness.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Article Engineering, Chemical

Insights on sustainable separation of ternary azeotropic mixture tetrahydrofuran/ethyl acetate/water using hybrid vapor recompression assisted side-stream extractive distillation

Ao Yang et al.

Summary: In this study, a sustainable ED process for separating ternary azeotropic mixture was developed using side-stream distillation and vapor recompression heat pump techniques, resulting in reduced energy consumption and CO2 emissions through optimized design.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Chemical

Sustainable design and multi-objective optimization of eco-efficient extractive distillation with single and double entrainer(s) for separating the ternary azeotropic mixture tetrahydrofuran/ethanol/methanol

Ao Yang et al.

Summary: This study proposes a sustainable process for the separation of valuable ternary azeotropic mixtures. Suitable entrainers are screened through thermodynamic analysis, and optimal operating parameters are obtained using particle swarm optimization algorithm. The economic, environmental, safety, and energy efficiency performances are evaluated.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Chemical

Eco-efficient heat-integrated extractive distillation process using ionic liquid as entrainer for ethyl acetate-isopropyl alcohol-water mixture

Zhishan Zhang et al.

Summary: This study compares enhanced extractive distillation processes using ionic liquid (IL) as entrainer with conventional extractive distillation process (CED) in terms of cost, energy, and carbon emissions reductions. The results show that the heat-integrated extractive distillation configuration with [BMIM][OAC] as entrainer (EDHI-IL) is the best solution for ecological efficiency, reducing TAC, ACC, AOC, and CO2 emissions.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Chemical

Sustainable separation of ternary azeotropic mixtures based on enhanced extractive distillation/pervaporation structure and multi-objective optimization

Hongru Zhang et al.

Summary: The development of an efficient separation and purification process for ternary aqueous azeotropes is crucial. The coupling process of extractive distillation and pervaporation technology proves to be more economically and environmentally advantageous compared to single distillation process.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Environmental

Efficient recovery of benzene and n-propanol from wastewater via vapor recompression assisted extractive distillation based on techno-economic and environmental analysis

Zhaoyuan Ma et al.

Summary: The combination of vapor recompression technology and extractive distillation technology in treating wastewater containing benzene/n-propanol can improve energy efficiency, reduce gas emissions, and enhance economic performance, demonstrating its advantages in environmental protection and energy saving.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Thermodynamics

Heat pump assisted extractive distillation sequences with intermediate-boiling entrainer

Chao Wang et al.

Summary: This study focuses on improving the economic efficiency and environmental sustainability of the classic extractive distillation process by using both vapor recompression heat pump and intermediate-boiling entrainer. The optimized systems show improvements in performance, with certain sequences demonstrating advantages in terms of economics, energy, and environmental impact compared to the traditional approach.

APPLIED THERMAL ENGINEERING (2021)

Article Engineering, Chemical

Conceptual design of the triple-column extractive distillation processes with single entrainer and double entrainer for separating the N-hexane/acetone/chloroform ternary multi-azeotropic mixture

Chao Wang et al.

Summary: This study compares the separation methods of triple-column extractive distillation process with double entrainer and single entrainer for ternary multi-azeotropic mixtures with special phase behavior. Through thermodynamic analysis and genetic algorithm optimization, it is demonstrated that the S-TCED process with single entrainer can effectively perform the separation.

CHEMICAL ENGINEERING SCIENCE (2021)

Article Engineering, Environmental

Energy efficient extractive distillation process assisted with heat pump and heat integration to separate acetonitrile/1,4-dioxane/water

Yinggui Xu et al.

Summary: Two energy efficient extractive distillation processes are proposed to separate acetonitrile/1,4-dioxane/water mixture, utilizing heat pumps and heat integration for energy conservation, and introducing various evaluation methods to assess process performance.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Engineering, Chemical

A novel vapor recompressed batch extractive distillation: Design and retrofitting

Sidharth Sankar Parhi et al.

Summary: This study focuses on the optimization of the design of a conventional batch extractive distillation (BED) using a mixed-integer nonlinear multi-objective optimization (MOO) approach. Pareto-optimal solutions are obtained and analyzed based on performance indicators, leading to the proposal of a novel limited vapor recompressed BED (L-VRBED) retrofit for significant reduction in CO2 emissions.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Energy-efficient extractive distillation combined with heat-integrated and intermediate reboilers for separating acetonitrile/isopropanol/water mixture

Yudong Li et al.

Summary: The research on conventional triple-column extractive distillation using ethylene glycol as entrainer for the separation of acetonitrile/isopropanol/water mixture showed that the heat-integrated schemes with intermediate reboilers had better performance in terms of energy saving, exergy efficiency, economic benefits, and environmental impact compared to the conventional extractive distillation process. This study highlights the potential for energy-efficient, cost-effective, and environmentally friendly separation techniques in chemical processes.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Thermodynamics

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Hongru Zhang et al.

Summary: This study investigates the separation mechanism of chemicals using thermodynamics and molecular dynamics theory, and reduces energy consumption by utilizing extractive dividing-wall column and pervaporation technologies. The optimized processes show improved performance in terms of TAC and CO2 emissions compared to the basic processes.

ENERGY (2021)

Article Engineering, Chemical

A Simple Criterion for Feasibility of Heat Integration between Distillation Streams Based on Relative Volatilities

Tony Joseph Mathew et al.

Summary: In this work, a new metric called pressure-scaled pseudo relative volatility is introduced to compare stream temperatures, and its effectiveness is justified by proving it is a monotonically increasing function of the liquid fraction in a saturated mixture stream. This metric is used to derive a shortcut criterion for checking the feasibility of various heat integration opportunities, such as thermal coupling via heat transfer (TCH), and a new optimization framework is proposed based on this criterion. By leveraging this new metric and framework, the study identifies feasible TCHs while minimizing the total heat duty of a distillation configuration, resulting in more heat duty efficient configurations.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Article Engineering, Chemical

Application of an Energy-Efficient Process with Reactive Coupling Pressure-Swing Distillation for Recycling Organic Materials from Wastewater

Yudong Li et al.

Summary: A sustainable reactive coupling pressure-swing distillation process was investigated to separate a ternary mixture, with the application of heat pump technologies showing potential for energy saving and improved economic performance.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Article Engineering, Chemical

Enhanced process for energy efficient extraction of 1,3-butadiene from a crude C4 cut

Jeremy Mantingh et al.

Summary: This study proposed novel enhancements to the 1,3-butadiene production process, including modifications to the ED part with intermediate heating and replacing classic columns with a heat pump assisted DWC. Rigorous simulations in Aspen Plus showed that these enhancements significantly reduced energy intensity and total costs of the process, with a payback time of 1 year.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Optimization and eco-efficiency analysis of extractive distillation processes with different solvents for separating the ternary mixture embedding two azeotropes

Chao Wang et al.

Summary: This study investigated the separation of azeotropic mixtures embedding two azeotropes using extractive distillation with different solvents. The results showed that the extractive distillation processes with dimethyl sulfoxide or chlorobenzene as solvent can provide certain advantages in terms of eco-efficiency.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Design and optimization for the separation of cyclohexane-isopropanol-water using mixed extractants with thermal integration based on molecular mechanism

Hongru Zhang et al.

Summary: By using mixed extractant and heat integrated energy-saving technology, cyclohexane and isopropanol can be effectively recovered from the wastewater produced in rapeseed oil production, which not only improves economic benefits but also reduces environmental impact.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Environmental

Performance evaluation of different extractive distillation processes for separating ethanol/tert-butanol/water mixture

Xiaojing Shi et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Article Engineering, Chemical

Heat integrated technology assisted pressure-swing distillation for the mixture of ethylene glycol and 1,2-butanediol

Weixin Mao et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Review Engineering, Chemical

Sustainable chemical processing and energy-carbon dioxide management: Review of challenges and opportunities

Ramsagar Vooradi et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)

Article Engineering, Chemical

Process evaluation on the separation of ethyl acetate and ethanol using extractive distillation with ionic liquid

Zhaoyou Zhu et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Article Engineering, Chemical

Economic Optimum Design of the Heterogeneous Azeotropic Dehydration of Ethanol

William L. Luyben

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

Article Engineering, Chemical

Design and Control of the Ethyl Benzene Process

William L. Luyben

AICHE JOURNAL (2011)

Article Thermodynamics

A NEW APPROACH TO ENTROPY PRODUCTION MINIMIZATION IN DIABATIC DISTILLATION COLUMN WITH TRAYS

Momcilo Dj. Spasojevic et al.

THERMAL SCIENCE (2010)