☆ 4.7 Article

Thermal and catalytic pyrolysis of a real mixture of post-consumer plastic waste: An analysis of the gasoline-range product

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Environmental Sciences

Informal landfill contributes to the pollution of microplastics in the surrounding environment

Yong Wan et al.

Summary: This study investigates the characteristics of microplastic pollution in an informal landfill in South China. The results indicate that a large amount of microplastics are present in the landfill refuse and underlying soil, with most of them being fibrous, small sized, and transparent. The microplastics detected in the landfill leachate and groundwater are even smaller and more diverse in polymer types. The study demonstrates that microplastics from informal landfills can leak out to the surrounding environment.

ENVIRONMENTAL POLLUTION (2022)

添加到收藏夹

Article Chemistry, Physical

Direct Polypropylene and Polyethylene Liquefaction in CO2 and N2 Atmospheres Using MgO Light and CaO as Catalysts

Jose Miguel Hidalgo Herrador et al.

Summary: The polyolefin to lighter molecules reaction has the potential to convert waste plastic into fuels and valuable chemicals. The use of MgO light and CaO catalysts improves the conversion efficiency of propylene and ethylene into liquid products, while reducing gaseous and solid byproducts. Reactions performed in a CO2 atmosphere result in higher conversion rates and a higher content of diesel and kerosene components in the products.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Characterization of liquid fraction obtained from pyrolysis of post-consumer mixed plastic waste: A comparing between measured and calculated parameters

M. F. Paucar-Sanchez et al.

Summary: This study investigated the thermal pyrolysis of plastic waste to obtain liquid oil and examined the effects of different conditions on the yield and properties of the oil. The results contribute to improving the efficiency of waste plastic utilization and provide fundamental data for the production and application of pyrolytic oils.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

添加到收藏夹

Article Engineering, Environmental

Thermo-catalytic pyrolysis of polystyrene in batch and semi-batch reactors: A comparative study

Amer Inayat et al.

Summary: Thermo-catalytic pyrolysis is a promising process for chemical recycling of waste polymeric materials, with PS wastes being excellent feedstocks. Semi-batch reactors outperformed batch reactors in terms of oil and SM yields in both thermal and catalytic tests. Layered catalyst arrangement can produce higher oil yields with higher selectivity for SM.

WASTE MANAGEMENT & RESEARCH (2021)

添加到收藏夹

Article Energy & Fuels

Characterization of Gasoline-like Transportation Fuels Obtained by Distillation of Pyrolysis Oils from Plastic Waste Mixtures

Zsolt Dobo et al.

Summary: The study demonstrates that pyrolysis of plastic waste can produce waste plastic gasoline (WPG) that meets transportation fuel standards, although there are issues with olefin content and distillation properties exceeding limits. Engine tests show a slight decrease in fuel consumption with WPG compared to commercial gasoline, but a slight increase in NOx emissions.

ENERGY & FUELS (2021)

添加到收藏夹

Article Engineering, Environmental

Pyrolysis of waste expanded polystyrene and reduction of styrene via in-situ multiphase pyrolysis of product oil for the production of fuel range hydrocarbons

Anjali Verma et al.

Summary: Upgraded fuel oil was successfully produced from waste expanded polystyrene (WEPS) through catalytic pyrolysis using ZSM-5 ammonium powder as catalyst, with A-type, B-type, and AB-type catalyst arrangements showing promising results in increasing the aromatics content of the fuel oil.

WASTE MANAGEMENT (2021)

添加到收藏夹

Article Engineering, Environmental

Revisiting Microplastics in Landfill Leachate: Unnoticed Tiny Microplastics and Their Fate in Treatment Works

Jing Sun et al.

Summary: Microplastics pose potential environmental risks, with a high concentration found in landfill leachate, especially in tiny particles. Membrane treatment effectively reduces microplastics loading but may also generate and release tiny microplastics.

WATER RESEARCH (2021)

添加到收藏夹

Article Engineering, Environmental

Conversion of PP, HDPE and LDPE Plastics into Liquid Fuels and Chemical Precursors by Thermal Cracking

Yuliana Rodriguez Lamar et al.

Summary: The kinetic study focused on thermal cracking of polypropylene, high-density polyethylene, and low-density polyethylene showed that the liquid fraction yield was highest for LDPE, with properties similar to diesel, while PP was closer to gasoline.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Engineering, Environmental

Two-step pyrolysis for waste HDPE valorization

Luis Rodriguez-Luna et al.

Summary: Pyrolysis process is an attractive alternative for recycling and reutilization of HDPE, with the ability to produce valuable chemical feedstock and high energy content hydrocarbons. By optimizing the process parameters, a volatile fraction equivalent to 97% of HDPE mass can be obtained. Chemical analysis shows that oil products have a greater variety of shorter-chain compounds compared to wax products.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

添加到收藏夹

Article Environmental Sciences

Characterization and Use of Char Produced from Pyrolysis of Post-Consumer Mixed Plastic Waste

M. A. Martin-Lara et al.

Summary: In this study, the pyrolysis of post-consumer mixed plastic waste was conducted to produce solid products used as adsorbents for lead in aqueous media. The results show that pyrolysis temperature affects the yield and properties of the solid product, with higher temperatures leading to lower carbon, hydrogen, and nitrogen content. Higher pyrolysis temperatures also result in increased adsorption capacity, with the solid obtained at 550 degrees C showing the highest value at 7.91 mg/g. Additionally, the Sips model best reproduces the experimental results of the adsorption process equilibrium study.

WATER (2021)

添加到收藏夹

Review Chemistry, Physical

Recent Progress in Low-Cost Catalysts for Pyrolysis of Plastic Waste to Fuels

Ganjar Fadillah et al.

Summary: The study focuses on the catalytic and thermal decomposition of plastic waste to fuels using low-cost catalysts like zeolite, clay, and bimetallic material. It examines the effects of different types of catalysts on the characteristics and product distribution of the produced products, highlighting the importance of catalyst type in plastic waste decomposition and oil yield/quality. Factors such as operating temperature, plastic waste-to-catalyst ratio, and reactor type are crucial in determining the quality and yield of oil products. The development of low-cost catalysts is crucial for efficient conversion of plastic solid waste (PSW) into oil/bio-oil products.

CATALYSTS (2021)

添加到收藏夹

Review Chemistry, Physical

Deactivation and Regeneration of Zeolite Catalysts Used in Pyrolysis of Plastic Wastes-A Process and Analytical Review

Vivien Daligaux et al.

Summary: In catalytic industrial processes, coke deposition remains a major drawback for solid catalysts use as it causes catalyst deactivation. Various regeneration processes have been investigated over the years to restore catalytic activity by recovering deactivated catalysts. This review focuses on oxidative treatments for catalyst regeneration and summarizes relevant analytical techniques for characterizing deactivated and regenerated solid catalysts.

CATALYSTS (2021)

添加到收藏夹

Article Chemistry, Analytical

Pyrolysis of plastic waste: Opportunities and challenges

Muhammad Saad Qureshi et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)

添加到收藏夹

Article Engineering, Environmental

Converting polycarbonate and polystyrene plastic wastes intoaromatic hydrocarbons via catalytic fast co-pyrolysis

Jia Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Characterization and Distillation of Pyrolysis Liquids Coming from Polyolefins Segregated of MSW for Their Use as Automotive Diesel Fuel

Alberto Gala et al.

ENERGY & FUELS (2020)

添加到收藏夹

Article Environmental Sciences

Thermal degradation of waste plastics under non-sweeping atmosphere: Part 2: Effect of process temperature on product characteristics and their future applications

Rohit Kumar Singh et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Hierarchically Structured Zeolites: From Design to Application

Li-Hua Chen et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Chemistry, Applied

Pyrolysis of waste polypropylene plastics for energy recovery: Influence of heating rate and vacuum conditions on composition of fuel product

George Kofi Parku et al.

FUEL PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Environmental

Chemical recycling of plastic waste: Bitumen, solvents, and polystyrene from pyrolysis oil

Juan Baena-Gonzalez et al.

WASTE MANAGEMENT (2020)

添加到收藏夹

Article Engineering, Environmental

Occurrence of microplastics in landfill systems and their fate with landfill age

Yinglong Su et al.

WATER RESEARCH (2019)

添加到收藏夹

Article Energy & Fuels

Production of liquid fuel from plastic waste using integrated pyrolysis method with refinery distillation bubble cap plate column

Ramli Thahir et al.

ENERGY REPORTS (2019)

添加到收藏夹

Article Energy & Fuels

Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization

Rohit Kumar Singh et al.

JOURNAL OF THE ENERGY INSTITUTE (2019)

添加到收藏夹

Article Energy & Fuels

Influence of catalyst bed temperature and properties of zeolite catalysts on pyrolysis-catalysis of a simulated mixed plastics sample for the production of upgraded fuels and chemicals

Jude A. Onwudili et al.

JOURNAL OF THE ENERGY INSTITUTE (2019)

添加到收藏夹

Article Thermodynamics

Valorisation of different waste plastics by pyrolysis and in-line catalytic steam reforming for hydrogen production

Itsaso Barbarias et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Catalytic Fast Pyrolysis of Biomass over Microporous and Hierarchical Zeolites: Characterization of Heavy Products

Jasmine Hertzog et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental Study of Thermal and Catalytic Pyrolysis of Plastic Waste Components

Azubuike Francis Anene et al.

SUSTAINABILITY (2018)

添加到收藏夹

Article Thermodynamics

Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics

Yuan Xue et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Effect of plastic waste types on pyrolysis liquid oil

R. Miandad et al.

INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

Gartzen Lopez et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Proceedings Paper Energy & Fuels

Distillation of Pyrolytic Oil Obtained from Fast Pyrolysis of Plastic Wastes

Songchai Wiriyaumpaiwong et al.

2017 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES (2017)

添加到收藏夹

Article Energy & Fuels

Activation temperature imposed textural and surface synergism of CaO catalyst for sunflower oil transesterification

Radoslav D. Micic et al.

FUEL (2015)

添加到收藏夹

Article Chemistry, Analytical

Thermal decomposition of individual and mixed plastics in the presence of CaO or Ca(OH)2

Shogo Kumagai et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)

Matthias Thommes et al.

PURE AND APPLIED CHEMISTRY (2015)

添加到收藏夹

Review Energy & Fuels

Progress in catalytic naphtha reforming process: A review

Mohammad Reza Rahimpour et al.

APPLIED ENERGY (2013)

添加到收藏夹

Article Chemistry, Physical

Simple method to synthesize high surface area magnesium oxide and its use as a heterogeneous base catalyst

Jonathan K. Bartley et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient dehydration of bio-based 2,3-butanediol to butanone over boric acid modified HZSM-5 zeolites

Wengui Zhang et al.

GREEN CHEMISTRY (2012)

添加到收藏夹

Article Engineering, Chemical

Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor

Gorka Elordi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)

添加到收藏夹

Article Chemistry, Applied

Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor

Su-Hwa Jung et al.

FUEL PROCESSING TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Environmental

Pyrolysis of municipal plastic wastes: Influence of raw material composition

A. Lopez-Urionabarrenechea et al.

WASTE MANAGEMENT (2010)

添加到收藏夹

Review Biology

Plastics recycling: challenges and opportunities

Jefferson Hopewell et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)

添加到收藏夹

Article Polymer Science

Thermal degradation of polyethylene and polystyrene from the packaging industry over different catalysts into fuel-like feed stocks

N Miskolczi et al.

POLYMER DEGRADATION AND STABILITY (2006)

添加到收藏夹

Article Chemistry, Analytical

Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons

A Demirbas

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)

添加到收藏夹

Article Chemistry, Analytical

Thermal and thermo-catalytic degradation of high-density polyethylene waste

N Miskolczi et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)

添加到收藏夹

Article Polymer Science

Conversion of polymers to fuels in a refinery stream

S Ucar et al.

POLYMER DEGRADATION AND STABILITY (2002)

添加到收藏夹

Article Chemistry, Physical

Product distribution from catalytic degradation of polyethylene over H-gallosilicate

K Takuma et al.

APPLIED CATALYSIS A-GENERAL (2000)

添加到收藏夹

Article Polymer Science

Pyrolysis of mixed polyolefins in a fluidised-bed reactor and on a pyro-GC/MS to yield aliphatic waxes

M Predel et al.

POLYMER DEGRADATION AND STABILITY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.