☆ 4.3 Article

Experimental study on tribological behavior of aluminum-copper functionally graded material

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Optimization of the sintering temperature, cooling time and grain size parameters to reduce residual stresses of copper-aluminum functionally graded material using response surface methodology

Ahmad Gheysarian et al.

Summary: The urgent need for combining heat-resistant and flexible materials in the medical, aerospace, and military industries is addressed through the use of functionally graded materials (FGM). FGMs have varying properties along their thickness direction, allowing for the creation of materials that can meet the requirements of different applications. This study investigates the effect of production parameters on residual stresses in aluminum-copper FGM parts and aims to optimize the production process. The results show that the number of residual stresses decreases with increasing sintering temperature, cooling time, and uniformity along the thickness. Finite element modeling confirms the experimental findings.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2023)

添加到收藏夹

Article Materials Science, Composites

Research on mechanical and erosion behavior of stepped polymeric functionally graded materials reinforced with aluminum

Vasavi Boggarapu et al.

Summary: This research aimed to evaluate the mechanical and erosion characteristics of stepped polymeric functionally graded materials (PFGMs) reinforced with aluminum particles through varying filler content and different fabrication methodologies. The results showed that the sample with thermal curing between layers exhibited higher strength and erosion resistance, indicating the effectiveness of this method in enhancing the properties of PFGMs.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Engineering, Mechanical

Study on mechanical and tribological characteristics of layered functionally graded polymer composite materials

Vasavi Boggarapu et al.

Summary: This study developed functionally graded composite materials by combining copper particles and epoxy. The results showed significant enhancement in mechanical strength and erosion resistance at higher curing temperatures.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Influence of copper addition on corrosion properties and hardness of Al-Cu/Al two-layered-structure composites

Kotikala Rajasekhar et al.

Summary: An experimental investigation was conducted on the hardness, density, and corrosion behavior of two-layered structured Al-xCu/Al samples under hot compaction conditions. Different copper content percentages were studied, with 15% copper content displaying the highest hardness at 550 degrees C. The addition of copper content was found to increase the corrosion susceptibility of the samples.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

A novel two-step method for producing Al/Cu functionally graded metal matrix composite

Moslem Tayyebi et al.

Summary: A novel method for manufacturing functionally graded metal matrix composites (FGMMC) is introduced in this study. The method combines the cutting-edge processes of accumulative roll bonding (ARB) and cold roll bonding (CRB) to fabricate Al/Cu functionally graded composites. The results show that the hardness of the layers increases with an increase in Cu content, and the tensile strength gradually grows as the volume fractions of Cu increase.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Structure Characterization and Impact Effect of Al-Cu Graded Materials Prepared by Tape Casting

Jianian Hu et al.

Summary: In this study, the response of materials under high-pressure compression is achieved by launching graded materials using a gas gun. The impact behavior of the materials is explained through analysis of microstructure and acoustic impedance.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

Investigation of tribological properties of biomass developed porous nano activated carbon composites

M. Om Prakash et al.

Summary: This study explores the use of porous nano activated carbon materials derived from waste biomass as reinforcements in epoxy composites. Results show that the inclusion of activated carbon enhanced the wear resistance of composites, with the lowest wear rate observed in composites with 2% filler loading. Regardless of the filler content, all composites displayed semi-ductile erosion wear behavior, with the 2% activated carbon epoxy composites showing the best abrasive wear resistance on the P800 abrasive surface.

WEAR (2021)

添加到收藏夹

Review Mechanics

State of the art in functionally graded materials

Vasavi Boggarapu et al.

Summary: This paper provides an overview of recent advancements in functionally graded materials research, highlighting the importance of material selection, processing techniques, analytical modeling, and applications. The challenges involved in developing these materials towards various scientific and technological fields are also discussed.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Microstructural and mechanical properties of Al-Cu functionally graded materials fabricated by powder metallurgy method

Kotikala Rajasekhar et al.

Summary: In this study, four dissimilar-layered volume fraction of Al-Cu functionally graded materials were fabricated using powder metallurgy. Mechanical and microstructural properties were characterized to show gradual variation in material composition distribution in two-layered FGMs. Improved micro-mechanical properties of the Al-Cu FGMs were observed based on material selection, sintering temperature and dwell time.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of Functionally Graded Tubes Based on Pure Al/Al2O3Metal Matrix Composites Manufactured by Centrifugal Casting for Automotive Applications

Bassiouny Saleh et al.

METALS AND MATERIALS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and properties of Cu-Cr coatings deposited by cold spraying

Yanli Chang et al.

VACUUM (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review on erosion wear characteristics of polymer matrix composites

Vasavi Boggarapu et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural, mechanical and tribological characterization on the Al based functionally graded material fabricated powder metallurgy

P. Naga Sudhakar Srinivas et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dry reciprocating wear and frictional behaviour of B4C reinforced functionally graded and homogenous aluminium matrix composites

N. Radhika et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges

Bassiouny Saleh et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Carbon nanotubes-reinforced aluminum alloy functionally graded materials fabricated by powder extrusion process

Dasom Kim et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental study on mechanical and ballistic behaviours of silicon carbide reinforced functionally graded aluminum foam composites

Gorkem Kirmizi et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Reciprocating Wear Analysis of Magnesium-Modified Hyper-eutectic Functionally Graded Aluminium Composites

E. Jayakumar et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Artificial neural network technique to predict the properties of multiwall carbon nanotube-fly ash reinforced aluminium composite

Udaya Devadiga et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Mechanics

Three-dimensional vibration analysis of beams with axial functionally graded materials and variable thickness

Mingfei Chen et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Composites

Mechanical Properties of Al 25 wt.% Cu Functionally Graded Material

Aref Mehditabar et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effects of Thermal Properties on Tracking and Erosion Resistance of Micro- ATH/AlN/BN filled Silicone Rubber Composites

M. Tariq Nazir et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2018)

添加到收藏夹

Article Engineering, Civil

Experimental and theoretical investigation of the thermo-mechanical deformation of a functionally graded panel

Qiliang Lin et al.

ENGINEERING STRUCTURES (2017)

添加到收藏夹

Article

Mechanical properties of Aluminum-Copper(p) composite metallic materials

Siddabathula Madhusudan et al.

Journal of Applied Research and Technology (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties

N. Radhika et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

Functionally graded materials: A review of fabrication and properties

Minoo Naebe et al.

APPLIED MATERIALS TODAY (2016)

添加到收藏夹

Article Engineering, Mechanical

Slurry erosion characteristics and erosion mechanisms of stainless steel

Q. B. Nguyen et al.

TRIBOLOGY INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of Oxide Growth on Surface of Al-Mg-Si Welded Joint

Azman Jalar et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2014)

添加到收藏夹

Article Polymer Science

Two-Body Abrasive Wear Behavior of Particulate Filled Polyamide66/Polypropylene Nanocomposites

B. Suresha et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Fabrication and properties of Al/Al-Cu functionally graded material

Qian Cong et al.

ADVANCED MATERIAL SCIENCE AND TECHNOLOGY, PTS 1 AND 2 (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding

Janne Nurminen et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)

添加到收藏夹

Review Chemistry, Physical

A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method

Yoshimi Watanabe et al.

MATERIALS (2009)

添加到收藏夹

Article Engineering, Industrial

Characterization of laser powder deposited Ti-TiC composites and functional gradient materials

Yongzhong Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.