4.7 Article

Determining the optimal structure for accurate estimation of the dynamic viscosity of oil-based hybrid nanofluid containing MgO and MWCNTs nanoparticles using multilayer perceptron neural networks with Levenberg-Marquardt Algorithm

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Investigation of effective parameters on relative thermal conductivity of SWCNT (15%)-Fe3O4 (85%)/water hybrid ferro-nanofluid and presenting a new correlation with response surface methodology

Soheyl Alidoust et al.

Summary: This study investigates the parameters affecting the relative thermal conductivity (RTC) of SWCNT (15%)-Fe3O4 (85%)/Water Hybrid Ferro-Nanofluid (HFNF). The study examines the contributions of temperature and solid volume fraction (SVF) and reports a significant increase in RTC for HFNF compared to water. The study also uses response surface methodology (RSM) to predict the behavior of HFNF and finds a high correlation and RTC sensitivity.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Automation & Control Systems

The effect of different parameters on ability of the proposed correlations for the rheological behavior of SiO2-MWCNT (90:10)/SAE40 oil-based hybrid nano-lubricant and presenting five new correlations

Mohammad Hemmat Esfe et al.

Summary: The rheological behavior and viscosity of SiO2-MWCNT/SAE40 oil-based hybrid nano-lubricant were investigated, and new correlation relationships were presented to predict viscosity.

ISA TRANSACTIONS (2022)

Article Engineering, Mechanical

Lubrication-enhanced mechanisms of titanium alloy grinding using lecithin biolubricant

Dongzhou Jia et al.

Summary: The effects of lecithin on the electrophysiological properties of biolubricant were investigated, and the influence of lecithin mixing ratio on grinding performance was discussed. The experimental results demonstrate that lecithin can improve the conductivity, viscosity, and surface tension of biolubricant, leading to enhanced grinding performance.

TRIBOLOGY INTERNATIONAL (2022)

Article Physics, Multidisciplinary

Numerical study of heat transfer in a microchannel equipped with the semicircular ribs influenced by slip condition: effects of various slip coefficient and Hartmann number

Xinlin He et al.

Summary: This study investigates the combined effect of slip condition and semicircular ribs on enhancing heat transfer in a microchannel. Numerical analysis shows that slip condition and magnetic field play significant roles in boosting heat transfer. Increasing the radius of ribs also improves heat transfer.

EUROPEAN PHYSICAL JOURNAL PLUS (2022)

Article Engineering, Manufacturing

Grindability of titanium alloy using cryogenic nanolubricant minimum quantity lubrication

Xin Cui et al.

Summary: This research establishes calculation formulas to evaluate the grindability of Ti6Al-4V titanium alloy, and finds that cryogenic nanolubricant minimum quantity lubrication (CNMQL) exhibits the best performance in the grinding process. CNMQL significantly reduces grinding force, peak temperature, and surface roughness, while improving the ability to resist surface defects.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Article Chemistry, Physical

Phase change process in a porous Carbon-Paraffin matrix with different volume fractions of copper oxide Nanoparticles: A molecular dynamics study

Xinglong Liu et al.

Summary: In this study, the phase transition process of porous carbon matrix containing paraffin as phase change materials in copper oxide nanoparticles is explored using molecular dynamics simulation. The effects of nanoparticle percentage and initial temperature on the thermal behavior and phase transition time are investigated.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Article Chemistry, Physical

Simultaneous numerical investigation of the passive use of phase-change materials and the active use of a nanofluid inside a rectangular duct in the thermal management of lithium-ion batteries

Yu Jiang et al.

Summary: This paper numerically investigates cooling of a cubic pack of nine cylindrical type lithium-ion batteries. The effects of parameters including the volume fraction of nanoparticles (NPs) and the height of the ducts on the cooling process are studied through simulations. The results show that an increase in the height of the ducts can decrease the temperature of the battery cells and increase the temperature of the output nanofluid, while increasing the duct height will continuously increase the heat transfer coefficient in the phase-change material (PCM).

JOURNAL OF POWER SOURCES (2022)

Article Engineering, Chemical

A unique thermal conductivity model (ANN) for nanofluid based on experimental study

Ashutosh Pare et al.

Summary: The study utilized artificial neural networks to simulate and predict the effects of nanoparticle concentration and temperature on the thermal conductivity of nanofluids, with the final results showing good agreement with experimental data.

POWDER TECHNOLOGY (2021)

Article Engineering, Chemical

A novel comparative analysis between the experimental and numeric methods on viscosity of zirconium oxide nano fluid: Developing optimal artificial neural network and new mathematical model

Andac Batur Colak

Summary: The study experimentally investigated the viscosity of different concentrations of ZrO2/Water nanofluids, showing that viscosity decreases with increasing temperature and increases with concentration. The developed artificial neural network and mathematical model accurately predicted and calculated the viscosity of ZrO2/Water nanofluids.

POWDER TECHNOLOGY (2021)

Article Engineering, Chemical

Preparation of stable TiO2-Graphene/Water hybrid nanofluids and development of a new correlation for thermal conductivity

Reza Bakhtiari et al.

Summary: The study investigated the thermal conductivity coefficient variation of TiO2-Graphene/Water hybrid nanofluid, showing that an increase in temperature and volume fraction enhances thermal conductivity. The effect of volume fraction on thermal conductivity was found to be larger than the effect of temperature, particularly at higher temperatures. A model was proposed to predict the thermal conductivity of nanofluids with a small margin of error, indicating good compatibility with experimental data.

POWDER TECHNOLOGY (2021)

Article Environmental Sciences

Haze Prediction Model Using Deep Recurrent Neural Network

Kailin Shang et al.

Summary: Haze pollution has become common in recent years, with PM2.5 and PM10 concentrations being key factors. Traditional neural networks struggle with time series data, while recurrent neural networks are specifically designed for sequence modeling.

ATMOSPHERE (2021)

Article Materials Science, Multidisciplinary

Experimental study of rheological characteristics of MWCNT-Al2O3 (40:60) / SAE50 hybrid nano-lubricant to identify optimal lubrication conditions and post-processing of results using the response surface method

Mohammad Hemmat Esfe et al.

Summary: This study investigated the rheological behavior of MWCNT-Al2O3/SAE50 hybrid nano-lubricant, showing that it exhibits pseudo-plastic non-Newtonian flow. A three-variable-quadratic model was proposed to predict the data, and numerical simulations revealed an increase in pressure drop and applied shear stress with increasing phi.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Thermodynamics

Experimental Study on the Effect of Nanoparticle Migration on the Convective Heat Transfer Coefficient of EG/Water-based Al2O3 Nanofluids

Tae Jong Choi et al.

Summary: This paper investigates the effect of nanoparticle migration on convective heat transfer characteristics of EG/water-based Al2O3 nanofluids. The results show that the convective heat transfer coefficients of the nanofluids vary depending on the N-BT values, leading to either an increase or decrease in heat transfer efficiency.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Introducing a novel heat sink comprising PCM and air - Adapted to electronic device thermal management

Rasool Kalbasi

Summary: The study introduced a novel hybrid heat sink filled with PCM and air to effectively reduce electronic device temperature. The hybrid heat sink outperformed both PCM-based and air-cooled heat sinks, especially as the convective coefficient increased.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Review Thermodynamics

A review of stability, thermophysical properties and impact of using nanofluids on the performance of refrigeration systems

Gokhan Yildiz et al.

Summary: The popularity of using nanoparticles in thermal engineering applications, particularly in refrigeration systems, is increasing. Nanofluids show improved thermal properties and system performance, but challenges such as stability and high viscosity need to be addressed for sustained performance improvement.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

Article Engineering, Civil

Optimal Design and Feature Selection by Genetic Algorithm for Emotional Artificial Neural Network (EANN) in Rainfall-Runoff Modeling

Amir Molajou et al.

Summary: Rainfall-runoff modeling at different time scales is a significant issue in hydro-environmental planning. In this study, a hybrid GA-EANN model was proposed and showed better performance compared to sole ANN and EANN models. The hybrid model achieved up to 19% and 35% improvement in testing suitability criteria for the Aji Chai and Murrumbidgee catchments, respectively.

WATER RESOURCES MANAGEMENT (2021)

Article Thermodynamics

Application of RSM and ANN for the prediction and optimization of thermal conductivity ratio of water based Fe2O3 coated SiC hybrid nanofluid

Manjakuppam Malika et al.

Summary: A novel water-based hybrid nanofluid was synthesized and the thermal conductivity ratio was predicted using artificial neural network (ANN) and response surface methodology (RSM) with optimized nanoparticle mixing ratio, demonstrating the effectiveness of both methods in predicting the thermal conductivity ratio of the nanofluid.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling

Min Yang et al.

Summary: The study investigates the convective heat transfer characteristics and measurement methods of nanofluid aerosol cooling, establishing a theoretical model for the convective heat transfer coefficient and proposing a new measurement device to validate the theoretical model.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

On the Thermal Conductivity Assessment of Oil-Based Hybrid Nanofluids using Extended Kalman Filter integrated with feed-forward neural network

Mehdi Jamei et al.

Summary: This study conducted a comprehensive data-intelligence analysis on various types of oil-based hybrid nanofluids using the Extended Kalman Filter-Neural network (EKF-ANN) approach, revealing that this model outperformed other methods in predicting thermal conductivity.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Review Chemistry, Physical

A review of the recent progress on thermal conductivity of nanofluid

Ramanujam Lenin et al.

Summary: Thermal properties of nanofluids, including dispersion, stability, and heat transfer, are heavily influenced by the interfacial layer, specifically its thickness and thermal conductivity. However, the challenges in determining these factors have limited research progress in the field of nanofluids. This review aims to provide insights on optimizing nanofluid thermal properties for commercial applications.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Physical

Examining rheological behavior of MWCNT-TiO2/5W40 hybrid nanofluid based on experiments and RSM/ANN modeling

Yu-Ming Chu et al.

Summary: The study experimentally examined the rheological behavior of MWCNT-TiO2/5W40 hybrid nanofluid, revealing that the presence of nanoparticles intensified the fluid viscosity by up to 790%. The neural network forecasting model also demonstrated acceptable results with a maximum error below 5% and R-2 = 0.999.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Engineering, Chemical

Investigation on hybrid nanofluids based on carbon nanotubes filled with metal nanoparticles: Stability, thermal conductivity, and viscosity

Can Jin et al.

Summary: Nanofluids as heat transfer fluids have great potential in heat exchange systems, yet new types with excellent thermal conductivity, dispersion stability, and low viscosity are still needed. Metal nanoparticles-filled carbon nanotubes composites can improve the thermal conductivity of nanofluids and promote the development of new thermal conductive agents.

POWDER TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

On the rheological properties of multi-walled carbon nano-polyvinylpyrrolidone/silicon-based shear thickening fluid

Li Sun et al.

Summary: This study investigates the rheological properties of shear thickening fluid (STF) enhanced by different additives at varying mass fraction ratios. It was found that the MWCNTs-PVP/SiO2-STF system shows significant shear thickening effect when the PVP mass fraction is increased to 0.15%, with the best performance observed at 0.1% PVP and 1mm plate spacing.

NANOTECHNOLOGY REVIEWS (2021)

Article Multidisciplinary Sciences

Modeling and Precise Prediction of Thermophysical Attributes of Water/EG Blend-Based CNT Nanofluids by NSGA-II Using ANN and RSM

Mohammad Hemmat Esfe et al.

Summary: The study optimized the thermophysical properties of water-ethylene glycol mixture-based CNT nanofluid using the NSGA-II method, investigating the effects of temperature and volume fraction parameters. Results showed that the MLP model outperformed RSM in predicting relative thermal conductivity, viscosity, and specific heat, with the volume fraction parameter being more important than temperature.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2021)

Article Thermodynamics

Viscosity analysis of enriched SAE50 by nanoparticles as lubricant of heavy-duty engines

Mohammad Hemmat Esfe et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Article Physics, Multidisciplinary

A unique multilayer perceptron model (ANN) for different oxide/EG nanofluid's viscosity from the experimental study

Devendra Yadav et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

Review Energy & Fuels

Application of nanofluids and fluids in photovoltaic thermal system: An updated review

Mohammad Hemmat Esfe et al.

SOLAR ENERGY (2020)

Article Thermodynamics

Experimental investigation on stability, thermal conductivity and rheological properties of rGO/ethylene glycol based nanofluids

Syed Nadeem Abbas Shah et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Review Green & Sustainable Science & Technology

On the evaluation of the viscosity of nanofluid systems: Modeling and data assessment

Abdolhossein Hemmati-Sarapardeh et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Engineering, Chemical

Experimental study on synthesis, stability, thermal conductivity and viscosity of Cu-engine oil nanofluid

Sadegh Aberoumand et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Article Nanoscience & Nanotechnology

Evaluation of rheological behavior of 10W40 lubricant containing hybrid nano-material by measuring dynamic viscosity

Afshin Ahmadi Nadooshan et al.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2017)

Article Thermodynamics

Application of three-level general factorial design approach for thermal conductivity of MgO/water nanofluids

Mohammad Hemmat Esfe et al.

APPLIED THERMAL ENGINEERING (2017)

Article Thermodynamics

Prediction of dynamic viscosity of a hybrid nano-lubricant by an optimal artificial neural network

Masoud Afrand et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Article Chemistry, Physical

A hybrid smart modeling approach for estimation of pure ionic liquids viscosity

Zohre Esmaeili-Jaghdan et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Article Thermodynamics

Measurement of thermal conductivity of ZnO-TiO2/EG hybrid nanofluid

Davood Toghraie et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Review Green & Sustainable Science & Technology

Rheological behaviour of nanofluids: A review

Anuj Kumar Sharma et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Proceedings Paper Energy & Fuels

Effect of Single-Walled Carbon Nanotube on the Viscosity of Lubricants

Gholamreza Vakili-Nezhaad et al.

2011 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY ENGINEERING (ICAEE) (2012)

Article Engineering, Multidisciplinary

On the effective viscosity of suspensions

B. Abedian et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2010)