☆ 4.7 Article

Properties of polymer composite with large dosage of phosphogypsum and it's application in pipeline

POLYMER TESTING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste

Dengji Xu et al.

Summary: Polyethylene (PE) is a major component of waste plastics with slow natural degradation. Incineration and thermolysis are effective methods for plastic waste treatment. The addition of catalysts like MCM-41 can control burning efficiency and reduce fire risks. HZSM-5 is the most effective catalyst for the conversion of PE to aromatic hydrocarbons.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Unraveling the microstructural properties of cement-slag composite pastes incorporated with smart polymer-based corrosion inhibitors: From experiment to molecular dynamics

Gaozhan Zhang et al.

Summary: This study introduced a smart organic polymer as a corrosion inhibitor and investigated its effect on cement-slag composite pastes through experiments and molecular dynamics simulations, revealing significant impacts on the hydration properties, pore structures, and ions resistance of the pastes.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Article Construction & Building Technology

Durability of concrete bearing polymer-treated mixed recycled aggregate

P. Velardo et al.

Summary: The construction industry is increasingly interested in the use of recycled aggregate in concrete manufacture, despite the lower quality of recycled materials. This study found that incorporating polymer pre-treated mixed recycled aggregate can improve concrete durability, with air drying treatment showing better results.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

High strength, flexible, and conductive graphene/polypropylene fiber paper fabricated via papermaking process

Shan Cao et al.

Summary: This study demonstrates the feasibility of preparing high-strength, flexible, and conductive graphene/polypropylene fiber paper through a traditional papermaking process. The composite paper shows promising properties such as high strength, good conductivity, shielding effectiveness, water resistance, fungi-proof, and thermal conductivity, expanding the potential industrial application of graphene materials.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and characterization of 2,5-furandicarboxylic acid poly(butanediol sebacate-butanediol) terephthalate (PBSeT) segment copolyesters with excellent water vapor barrier and good mechanical properties

Yu Feng et al.

Summary: Aliphatic-aromatic copolyesters were synthesized from sebacic acid, terephthalic acid, 1,4-butanediol, and 2,5-furandicarboxylic acid, and the addition of 2,5-furandicarboxylic acid improved the tensile strength, yield strength, and water vapor barrier of the copolyesters. Copolyesters with 6% of 2,5-furandicarboxylic acid showed the best comprehensive performance.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Vertically Aligned Silicon Carbide Nanowires/ Boron Nitride Cellulose Aerogel Networks Enhanced Thermal Conductivity and Electromagnetic Absorbing of Epoxy Composites

Duo Pan et al.

Summary: A cellulose aerogel with highly enhanced thermal conductivity was successfully obtained by constructing a vertically aligned silicon carbide nanowires/boron nitride network. The composite exhibited significantly increased thermal conductivity compared to pure epoxy, both in vertical and horizontal directions. Additionally, it showed good electrical insulation and excellent electromagnetic wave absorption performance.

NANO-MICRO LETTERS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Laccase immobilized on functionalized cellulose nanofiber/alginate composite hydrogel for efficient bisphenol A degradation from polluted water

Feng Zhang et al.

Summary: Enzyme immobilization technique has broad applications in biotechnology, biochemistry, and environmental remediation. In this study, a composite hydrogel was fabricated for immobilization of laccase, and the immobilized laccase showed improved enzymatic activity, stability, and reusability. The immobilized laccase was effective in degrading bisphenol A from polluted water and showed great potential for industrial applications.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improving thermal conductivity of polyethylene/polypropylene by styrene-ethylene-propylene-styrene wrapping hexagonal boron nitride at the phase interface

Xinyi Jing et al.

Summary: In this study, a co-continuous composite structure was formed by controlling the percentage of polyethylene and polypropylene blend and incorporating hexagonal boron nitride. The thermal conductivity of the composites was significantly improved by wrapping h-BN with thermoplastic elastomer and achieving localized distribution at the interface.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Review Nanoscience & Nanotechnology

Waterborne polyurethane and its nanocomposites: a mini-review for anti-corrosion coating, flame retardancy, and biomedical applications

Jianchen Cai et al.

Summary: Waterborne polyurethanes (WPU) are environmentally friendly alternatives to solvent-borne polyurethanes. The properties of WPU can be tailored by choosing different monomers and monomer ratios. This mini-review discusses the synthesis of WPU, the influence of materials on their properties, and strategies to improve their performance. The structure-property relationship for their end-use applications is also emphasized.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flexible polystyrene/graphene composites with epsilon-near-zero properties

Zheng Zhang et al.

Summary: This work focuses on the fabrication and characterization of flexible polystyrene/graphene (PS/GR) composites with epsilon-near-zero (ENZ) properties at radio frequency. The addition of graphene nanosheets in PS matrix led to the formation of a continuous conductive network, resulting in the observation of ENZ behavior at around 920 kHz. This research demonstrates the potential of flexible PS/GR composites in applications such as invisibility cloaks, drug delivery, and soft robotics.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Janus phenol-formaldehyde resin and periodic mesoporous organic silica nanoadsorbent for the removal of heavy metal ions and organic dyes from polluted water

Yangying Si et al.

Summary: In this study, Janus PF&PMO nano-adsorbent with an asymmetric structure was prepared and found to efficiently adsorb heavy metal ions and organic dyes in water. The nano-adsorbent showed potential for effective use in sewage treatment systems.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Article Chemistry, Applied

Waterborne acrylic resin co-modified by itaconic acid and γ-methacryloxypropyl triisopropoxidesilane for improved mechanical properties, thermal stability, and corrosion resistance

Zhuanghua Yu et al.

Summary: Waterborne acrylic resin modified with both IA and KH571 was successfully synthesized by seeded emulsion polymerization. The addition of IA and KH571 greatly improved the water resistance and other properties of the resin coating, making it a potential candidate for waterproof and anticorrosive coatings.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Article Construction & Building Technology

Mechanical behavior of calcium sulfate whisker-reinforced paraffin/ gypsum composites

Fentian Ma et al.

Summary: The study found that CSW-reinforced PA/gypsum composites exhibited superior mechanical properties, with gypsum containing 15 wt% PA showing the best performance. The flexural and compressive strength values of the composites increased by 131% and 278%, respectively, when the CSW content was 3.5 wt%.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Effect of crystalline admixture and polypropylene microfiber on the internal sulfate attack in Portland cement composites due to pyrite oxidation

Mateus E. G. Dobrovolski et al.

Summary: Internal sulfate attack (ISA) in cement composites is caused by the presence of mineral sulfide, which leads to expansion due to the oxidation of pyrite. The addition of microfibers can reduce expansion but also increase the material's porosity and permeability, allowing for water and oxygen penetration.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Study on performance and function mechanisms of whisker modified flue gas desulfurization (FGD) gypsum

Shouwei Jian et al.

Summary: This study focused on improving the properties of FGD gypsum by incorporating anhydrous calcium sulfate whisker and calcium carbonate whisker, which significantly enhanced its mechanical properties while reducing processability. Anhydrous calcium sulfate whisker was more effective than calcium carbonate whisker in enhancing the FGD gypsum. The research not only provides a theoretical basis for improving the FGD gypsum performance, but also highlights the importance of balancing mechanical properties and processing characteristics in the development of FGD gypsum products.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Synergistic influence of CaCO3 nanoparticle on the mechanical and thermal of fly ash reinforced epoxy polymer composites

Shilpi Tiwari et al.

Summary: The addition of nano CaCO3 to epoxy/fly ash composites significantly enhances their mechanical properties, mainly due to the reinforcing effect and strong interfacial bonding of CaCO3 nanoparticles with the composite materials.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Preparation and properties of ethylene-acrylate salt ionomer/polypropylene antistatic alloy

Yifan Su et al.

Summary: A self-made ionomer antistatic agent was successfully developed for the preparation of ionomer/PP antistatic alloy, showing similar performance to the commercial product Entira. Material test results revealed that PP modified by the self-made ionomer exhibited physical properties very similar to those modified by Entira, indicating potential for research and application.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Evaluation of mechanical and thermal properties and creep behavior of micro- and nano-CaCO3particle-filled HDPE nano- and microcomposites produced in large scale

Harun Sepet et al.

POLYMER BULLETIN (2020)

添加到收藏夹

Article Mechanics

Plastic deformation and mixed-mode I/II fracture behavior of unplasticized polyvinyl chloride

Chun Ran et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Novel PEEK/nHA composites fabricated by hot-pressing of 3D braided PEEK matrix

J. Ma et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flexible multi-walled carbon nanotubes/polydimethylsiloxane membranous composites toward high-permittivity performance

Zongxiang Wang et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

A TG-FTIR investigation on the co-pyrolysis of the waste HDPE, PP, PS and PET under high heating conditions

R. K. Singh et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

添加到收藏夹

Article Construction & Building Technology

Comparative study of oil palm trunk and rice husk as fillers in gypsum composite for building material

Mohd Ezwan Selamat et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and Microstructural Properties of Redispersible Polymer-Gypsum Composites

Carlos Eduardo Marmorato Gomes et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Physical and mechanical properties of gypsum-based composites reinforced with PVA and PP fibers

Cong Zhu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Environmental

Hydrothermal synthesis of nanocrystalline hydroxyapatite from phosphogypsum waste

Hiba Bensalah et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

添加到收藏夹

Article Engineering, Environmental

Complex Processing of Phosphogypsum - a Way of Recycling Dumps with Reception of Commodity Production of Wide Application

Denis Lutskiy et al.

JOURNAL OF ECOLOGICAL ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Composites

Novel Dental Composite Material Reinforced With Silane Functionalized Microsized Gypsum Filler Particles

Shiv Ranjan Kumar et al.

POLYMER COMPOSITES (2017)

添加到收藏夹

Article Materials Science, Textiles

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-fillers

Zhitong Yao et al.

FIBERS AND POLYMERS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Gypsophile Chemistry Unveiled: Fourier Transform Infrared (FTIR) Spectroscopy Provides New Insight into Plant Adaptations to Gypsum Soils

Sara Palacio et al.

PLOS ONE (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recycled high-density polyethylene/gypsum composites: evaluation of the microscopic, thermal, flammability, and mechanical properties

F. J. H. T. V. Ramos et al.

GREEN CHEMISTRY LETTERS AND REVIEWS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties and morphology of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized by transesterification

Shan Lin et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Construction & Building Technology

Environment hazard mitigation of waste gypsum and chalk: Use in construction materials

Mridul Garg et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

添加到收藏夹

Article Construction & Building Technology

Quantitative determination of anhydrite III from dehydrated gypsum by XRD

Sebastian Seufert et al.

CEMENT AND CONCRETE RESEARCH (2009)

添加到收藏夹

Article Construction & Building Technology

Utilization of phosphogypsum as raw and calcined material in manufacturing of building products

Nurhayat Degirmenci

CONSTRUCTION AND BUILDING MATERIALS (2008)

添加到收藏夹

Article Construction & Building Technology

Utilization of weathered phosphogypsum as set retarder in Portland cement

IA Altun et al.

CEMENT AND CONCRETE RESEARCH (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.