☆ 4.7 Article

Numerical and experimental study on mechanical properties of glass fiber-reinforced polymer sandwich structure with polyurethane foam-filled M-shaped core

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

On the vibration of functionally graded annular plate with elastic edge supports and resting on Winkler foundation

Soheil Hashemi et al.

Summary: This paper deals with the exact solution of vibration analysis of functionally graded annular plate under elastically restrained boundary conditions and resting on Winkler foundation. The motion equations and boundary conditions are derived using Hamilton's principle, and the effects of various parameters on the frequency parameter are evaluated. The accuracy of the results is validated by comparison with previously published literature.

AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2023)

添加到收藏夹

Article Engineering, Civil

Experimental and analytical investigations on the failure modes of concrete sandwich panels under axial compression

J. Daniel Ronald Joseph et al.

Summary: This paper proposes precast lightweight Concrete Sandwich Panels (CSP) as an alternative to conventional load bearing brick masonry walls. The failure modes, strength, and behavior of CSP are defined through theoretical and experimental investigations. The results show that CSP can be used for practical applications and the existing strength predicting formulas need to be modified.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2023)

添加到收藏夹

Article Engineering, Mechanical

Flexural behavior of sandwich panels with 3D printed cellular cores and aluminum face sheets under quasi-static loading

S. Chahardoli

Summary: This study presents sandwich panels with a PLA core made through the FDM method. The mechanical properties of the proposed samples were investigated and it was found that the layering type in the FDM method and the main pattern extension type can affect the collapse properties of the sandwich panel. Furthermore, the collapse properties and absorbed energy of the samples depend on the loading direction. Numerical modeling showed good agreement with experimental results.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2023)

添加到收藏夹

Article Mechanics

Experimental and numerical analysis of a novel curved sandwich panel with pultruded GFRP strip core

Donghui Zhao et al.

Summary: A novel curved sandwich panel with pultruded GFRP strip core was proposed and studied in this work. Experimental and numerical results showed that increasing the surface thickness can improve load-carrying capacity and change the failure mode.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Nonlinear Free Vibration Analysis of In-plane Bi-directional Functionally Graded Plate with Porosities Resting on Elastic Foundations

Soheil Hashemi et al.

Summary: This paper presents the nonlinear free vibration analysis of in-plane bi-directional functionally graded rectangular plates with porosities. The effects of key parameters on the nonlinear frequency are investigated through numerical results, and good agreements are found with published data.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexural property evaluation of web reinforced GFRP-PET foam sandwich panel: Experimental study and numerical simulation

Honglei Xie et al.

Summary: This study focused on the flexural property of PET foam-filled lattice composite sandwich panels under four-point bending. Increasing the thickness of face sheet and PET foam can effectively improve the ultimate load of the panels. Experimental results and theoretical predictions showed errors within 10% for bending stiffness and ultimate load.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Mechanics

Effect of high-low temperature on the compressive and shear performances of composite sandwich panels with pyramidal lattice truss cores

Xiaodong Li et al.

Summary: This study investigated the compressive and shear performance of composite sandwich panels with pyramidal lattice truss cores (CSPPLTCs) in high and low temperature environments. The results showed that the improvement of interface bonding performance enhanced the compressive and shear performance of CSPPLTCs in low temperature environments, while the flexible state of the resin led to a deterioration in performance in high temperature environments.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Construction & Building Technology

Bending behaviour of sandwich panels of vegetal fabric reinforced cementitious matrix: Experimental test and numerical simulation

Luis Mercedes et al.

Summary: This study presents a composite design of sandwich panels using vegetal fabrics and connectors, demonstrating their competitiveness in developing effective composite action compared to synthetic fibers. The technology based on vegetal FRCM provides an economical, sustainable, and competitive solution for lightweight construction.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical investigation of flexural behavior of non-uniform thin-walled beams under three-point loading

S. Chahardoli

Summary: The study focused on enhancing the energy absorption capacity of side beams for automobiles by creating non-uniform cross-sections, achieving up to a 71% increase in specific energy absorption. Experimental and numerical investigations, along with optimization algorithms, demonstrated the effectiveness of this design approach.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Composites

Flexural strength of foam-filled polymer composite sandwich panel with novel M-shaped core reinforced by nano-SiO2

Himan Khaledi et al.

Summary: The flexural strength of carbon fiber reinforced polymer sandwich panels reinforced with a novel M-shaped lattice core and nano-SiO2 was experimentally determined. The addition of 1 to 3 wt% nano-SiO2 into carbon fibers showed the most desirable effects on enhancing flexural strength, while the use of polyurethane foam and the new M-shaped core structure also improved the performance of the sandwich panels.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Mathematics, Applied

An Analytical Solution for Nonlinear Vibration Analysis of Functionally Graded Rectangular Plate in Contact with Fluid

Soheil Hashemi et al.

Summary: This paper investigates the nonlinear vibrations analysis of functionally graded (FG) rectangular plate in contact with fluid using first order shear deformation theory (FSDT) for the first time. The effects of system parameters such as vibration amplitude, fluid density, fluid depth ratio, volume fraction index and aspect ratio on the nonlinear natural frequency of the plate are discussed in detail through the use of von Karman nonlinearity strain-displacement relations and Galerkin procedure.

ADVANCES IN APPLIED MATHEMATICS AND MECHANICS (2021)

添加到收藏夹

Article Mechanics

An Analytical Solution for Nonlinear Vibrations Analysis of Functionally Graded Plate Using Modified Lindstedt-Poincare Method

S. Hashemi et al.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2020)

添加到收藏夹

Article Engineering, Civil

Nonlinear Free and Forced Vibrations of In-Plane Bi-Directional Functionally Graded Rectangular Plate with Temperature-Dependent Properties

Soheil Hashemi et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2020)

添加到收藏夹

Article Engineering, Civil

Optimization of hole height and wall thickness in perforated capped-end conical absorbers under axial quasi-static loading (using NSGA-III and MOEA/D algorithms)

S. Chahardoli et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Flexural behavior of singly curved X-Cor® sandwich composite structures: Experiment and finite element modeling

Sandip Haldar et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Bending behavior of lightweight sandwich-walled shells with pyramidal truss cores

J. Xiong et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Engineering, Civil

Improved high-order bending analysis of double curved sandwich panels subjected to multiple loading conditions

K. Malekzadeh Fard et al.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2014)

添加到收藏夹

Article Materials Science, Composites

The Effects of Helical Ribs' Number and Grid Types on the Buckling of Thin-walled GFRP-stiffened Shells under Axial Loading

M. Yazdani et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)

添加到收藏夹

Article Materials Science, Characterization & Testing

Low-velocity impact response of injection-moulded polypropylene plates - Part 1: Effects of plate thickness, impact velocity and temperature

H. Daiyan et al.

POLYMER TESTING (2010)

添加到收藏夹

Article Engineering, Aerospace

Optimal design of composite lattice shell structures for aerospace applications

G. Totaro et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Mechanics

Progressive failure analysis for advanced grid stiffened composite plates/shells

Zhifeng Zhang et al.

COMPOSITE STRUCTURES (2008)

添加到收藏夹

Article Mechanics

Experimental study and finite element analysis of the elastic instability of composite lattice structures for aeronautic applications

E. Frulloni et al.

COMPOSITE STRUCTURES (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

Energy absorption and damage evaluation of grid stiffened composite panels under transverse loading

P Jadhav et al.

COMPOSITES PART B-ENGINEERING (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.