☆ 4.6 Article

Efficient and stable perovskite solar cells based on blade-coated CH3NH3PbI3 thin films fabricated using ?green? solvents under ambient conditions

ORGANIC ELECTRONICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Blade Coating Inverted Perovskite Solar Cells with Vacuum-Assisted Nucleation Based on Bottom Quasi-2D Passivation

Xinwen Zhang et al.

Summary: A vacuum-assisted approach is developed to fabricate mirror-like, pinhole-free, highly crystalline, and uniform blade-coated perovskite films without using antisolvent and air knife. The effect of phenethylammonium iodide passivation at the top and bottom interfaces of a perovskite layer based on an FTO/NiOx/perovskite/C-60/BCP/Cu inverted p-i-n structure is systematically investigated. The encapsulated device, fabricated by blade coating under ambient conditions, retains 97% of its maximum efficiency after a 1000-hour photostability test.

SOLAR RRL (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Stable and efficient perovskite solar cells by discrete two-dimensional perovskites capped on the three-dimensional perovskites bilayer thin film

Luyao Zheng et al.

Summary: This study demonstrates that the combination of three-dimensional and two-dimensional perovskites can create a bilayer structure that enables stable and efficient perovskite solar cells. The results show that discrete two-dimensional perovskite crystals on the surface of the three-dimensional perovskite film improve water resistance without sacrificing optoelectronic properties, resulting in over 23% power conversion efficiency and increased stability.

NANO ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Blade-coated inverted perovskite solar cells in an ambient environment

Xinwen Zhang et al.

Summary: This study demonstrates the manufacturing of perovskite solar cells based on FACs using blade coating followed by vacuum quenching method in an ambient environment, and successfully solves the low efficiency issue of the hole transport material, achieving higher efficiency.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells with Imidazolium-Based Ionic Liquid for Surface Passivation and Charge Transport

Xuejie Zhu et al.

Summary: In this study, DMIMPF6 ionic liquid was used to passivate surface defects of perovskite, resulting in increased solar cell efficiency and enhanced long-term stability of the device.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Editorial Material Green & Sustainable Science & Technology

Green solvent for perovskite solar cell production

Nam-Gyu Park

Summary: A study has identified a green solvent that can enhance the sustainability and scalability of perovskite solar cells, moving the technology closer to commercialization.

NATURE SUSTAINABILITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Anti-solvent engineering via potassium bromide additive for highly efficient and stable perovskite solar cells

Sadeer M. Majeed et al.

Summary: The study demonstrates the use of KBr additive in CB anti-solvent engineering to enhance perovskite quality in triple-cation perovskite solar cells, leading to improved crystallinity, passivation of surface defects, suppressed nonradiative recombination, and facilitated charge extraction. Additionally, the hysteresis behavior in the perovskite layer was suppressed due to halide vacancies filling with K+ ions.

ORGANIC ELECTRONICS (2021)

添加到收藏夹

Review Energy & Fuels

Pressure Effects on Lead-Free Metal Halide Perovskites: a Route to Design Optimized Materials for Photovoltaics

Marta Morana et al.

Summary: Metal halide perovskites show great potential for solar cells and LEDs, but issues like lead contamination and low efficiency are being addressed through the search for environmentally friendly alternatives and the use of pressure tuning to enhance performance.

SOLAR RRL (2021)

添加到收藏夹

Review Chemistry, Physical

Large-Area Blade-Coated Solar Cells: Advances and Perspectives

Yifan Xiao et al.

Summary: This review introduces the blade-coating method for preparing large-area films, summarizes recent advances in blade-coated organic solar cells and perovskite solar cells, discusses the effects of blade parameters on the crystal growth of light-harvesting materials, and the limitations and advantages of making high-quality films via blade-coating. Finally, strategies for up-scaling solar cells via blade-coating are proposed.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Metal-Halide Perovskite Crystallization Kinetics: A Review of Experimental and Theoretical Studies

Yue-Min Xie et al.

Summary: Metal-halide perovskites are considered ideal photovoltaic materials due to their variable crystal material composition and superb optoelectronic performance, but the complexity of their crystallization process can lead to reduced film crystallinity and decreased device performance. Extensive research has been conducted on the crystallization kinetics of 3D MHPs, and methods for modulating MHP crystallization have been summarized, including solution engineering, compositional engineering, interfacial engineering, and additive passivation. The review also provides insights into the prospects and challenges in revealing perovskite crystallization kinetics.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Composition engineering of operationally stable CsPbI2Br perovskite solar cells with a record efficiency over 17%

Teoman Ozturk et al.

Summary: The study presents a method of tuning CsPbI2Br crystallization by incorporating FeCl2 into the perovskite precursor. The introduction of FeCl2 stabilizes the crystal phase, improves efficiency and stability of the photovoltaic devices.

NANO ENERGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Volatile solution: the way toward scalable fabrication of perovskite solar cells?

Congcong Wu et al.

Summary: Perovskite photovoltaics have made impressive progress in efficiency and stability in the past decade, which has brought new insights and excitement to the industrial sector. However, transitioning this technology from laboratory to industrial level faces the crucial barrier of scalable fabrication. Researchers have proposed the use of volatile solutions as an alternative ink system to overcome this barrier and achieve reliable manufacturing in the future.

MATTER (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ XPS investigation of the X-ray-triggered decomposition of perovskites in ultrahigh vacuum condition

Wei-Chun Lin et al.

Summary: The study found that X-ray can induce degradation of CH3NH3PbI3 perovskite films, resulting in the formation of metallic lead, and a significant decrease in nitrogen content within the first hour of X-ray exposure. This discovery could have applications in the field of X-ray sensors or detectors.

NPJ MATERIALS DEGRADATION (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Low-frequency lattice phonons in halide perovskites explain high defect tolerance toward electron-hole recombination

Weibin Chu et al.

SCIENCE ADVANCES (2020)

添加到收藏夹

Article Chemistry, Physical

High-Performance Perovskite Single-Junction and Textured Perovskite/Silicon Tandem Solar Cells via Slot-Die-Coating

Anand S. Subbiah et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

High-Performance Perovskite Solar Cells by One-Step Self-Assembled Perovskite-Polymer Thin Films

Luyao Zheng et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fully Doctor -bladed efficient perovskite solar cells in ambient condition via composition engineering

Yongyi Peng et al.

ORGANIC ELECTRONICS (2020)

添加到收藏夹

Review Chemistry, Physical

A review of aspects of additive engineering in perovskite solar cells

Apurba Mahapatra et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Understanding of perovskite crystal growth and film formation in scalable deposition processes

Chang Liu et al.

CHEMICAL SOCIETY REVIEWS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Monoammonium Porphyrin for Blade-Coating Stable Large-Area Perovskite Solar Cells with >18% Efficiency

Congping Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Physical

Perovskite Cluster-Containing Solution for Scalable D-Bar Coating toward High-Throughput Perovskite Solar Cells

Dong-Nyuk Jeong et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

添加到收藏夹

Article Chemistry, Physical

Single-Crystal MAPbI3 Perovskite Solar Cells Exceeding 21% Power Conversion Efficiency

Zhaolai Chen et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Elucidating the dynamics of solvent engineering for perovskite solar cells

Zulqarnain Arain et al.

SCIENCE CHINA-MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of Cl Incorporation in Perovskite Precursor on the Crystal Growth and Storage Stability of Perovskite Solar Cells

Hui Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Energy & Fuels

Novel Surface Passivation for Stable FA0.85MA0.15PbI3 Perovskite Solar Cells with 21.6% Efficiency

Fang Qian et al.

SOLAR RRL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elucidating the long-range charge carrier mobility in metal halide perovskite thin films

Jongchul Lim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Minjin Kim et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Slow surface passivation and crystal relaxation with additives to improve device performance and durability for tin-based perovskite solar cells

Efat Jokar et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Addressing the stability issue of perovskite solar cells for commercial applications

Lei Meng et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films

Nakita K. Noel et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Chemistry, Physical

Lead Halide Perovskite Nanocrystals in the Research Spotlight: Stability and Defect Tolerance

He Huang et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crystallization Kinetics and Morphology Control of Formamidinium-Cesium Mixed-Cation Lead Mixed-Halide Perovskite via Tunability of the Colloidal Precursor Solution

David P. McMeekin et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Effect of PbI2 Passivation and Chlorine Inclusion Yielding High Open-Circuit Voltage Exceeding 1.15 V in Both Mesoscopic and Inverted Planar CH3NH3PbI3(Cl)-Based Perovskite Solar Cells

Fangyuan Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency

Michael Saliba et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Experimental and theoretical optical properties of methylammonium lead halide perovskites

Aurelien M. A. Leguy et al.

NANOSCALE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comprehensive theoretical study of halide perovskites ABX3

Jingyu Qian et al.

ORGANIC ELECTRONICS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Advances in Perovskite Solar Cells

Chuantian Zuo et al.

ADVANCED SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Perovskite solar cells and large area modules (100 cm2) based on an air flow-assisted PbI2 blade coating deposition process

Stefano Razza et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells

Yaoguang Rong et al.

NANOSCALE (2015)

添加到收藏夹

Article Chemistry, Physical

The roles of alkyl halide additives in enhancing perovskite solar cell performance

Chu-Chen Chueh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Chemistry, Physical

Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic Performance

Stefaan De Wolf et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Femtosecond Time-Resolved Transient Absorption Spectroscopy of CH3NH3PbI3 Perovskite Films: Evidence for Passivation Effect of PbI2

Lili Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

添加到收藏夹

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

Samuel D. Stranks et al.

SCIENCE (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.