☆ 4.7 Article

Research on the lightweight structural optimization design of the front collector of the polymetallic nodule miner

OCEAN ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Marine

Data-driven optimization design of a novel pressure hull for AUV

Ming Yang et al.

Summary: This paper presents a novel design of a ring-stiffened arched cylindrical (RAC) hull for autonomous underwater vehicles (AUVs), and proposes a data-driven approach for efficiently designing pressure hulls with irregular structures. The optimization design of the RAC structure for AUV is performed, and pressure tests are carried out to verify the proposed approach.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Engineering, Marine

Design and optimization of cylindrical hull with non-uniform arch ribs for underwater gliders based on approximate model and experiments

Cheng Wang et al.

Summary: This study proposes a cylindrical hull with non-uniform arch ribs to increase compressibility and decrease buoyancy factor of underwater vehicles. The optimal hull, obtained through design optimization and verified by finite element method and pressure tests, shows improved deformation and reduced mass compared to a conventional cylindrical hull.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Structural optimization design of typical adhesive bonded sandwich T-joints based on progressive damage analysis and multi-island genetic algorithm

Yiran Niu et al.

Summary: This paper discusses the optimization of multi-laminate structures using MIGA algorithm and CAE solver, with a focus on a typical adhesive bonded sandwich T-joint. By establishing a finite element model based on progressive damage analysis and cohesive zone model, the optimization procedure successfully achieved a weight reduction of 34.24% compared to the initial structure. The study also highlights the influence of design variables on main constraint variables based on historical data.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Fluid-structure modelling for material deformation during cavitation bubble collapse

Prasanta Sarkar et al.

Summary: This paper compares one-way and two-way coupled fluid-structure interaction (FSI) modeling, finding that two-way coupling can more accurately reflect the impact of solid material motion and deformation on bubble dynamics. Two-way coupling can also better analyze the effects of structural response of different materials on bubble dynamics and impact pressures.

JOURNAL OF FLUIDS AND STRUCTURES (2021)

添加到收藏夹

Article Engineering, Marine

Optimal design and strength reliability analysis of pressure shell with grid sandwich structure

Ning Li et al.

Summary: This study focuses on lightweight optimum design of head pressure shell of an autonomous underwater vehicle (AUV) with reliability requirements. A grid sandwich structure is applied and an optimal mathematical model is established, solved by genetic algorithm based on back propagation neural network surrogate model and optimized by particle swarm optimization. Randomness of geometry sizes, material properties and loads are considered for reliability, showing a reduction in weight and successful optimization of the pressure shell design.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Marine

Study on an Analytical Solution to the Mechanical Response of Soil Cut by a Bionic Force Enhancement Grouser

Yanli Chen et al.

Summary: This study focused on the design of a bionic grouser, optimizing parameters to increase the traction force of deep-sea mining vehicles. The results showed a significant improvement in traction force, providing a new approach to enhancing mining efficiency.

JOURNAL OF MARINE SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Review Engineering, Marine

A brief review of recent progress on deep sea mining vehicle

Dingxin Leng et al.

Summary: Developed to tackle future resource shortages, deep-sea mining systems and technology hold great commercial potential worldwide. Deep-sea mining vehicles (DSMVs) are essential for operations, with this paper highlighting their significance, challenges, and engineering applications. Key control strategies for DSMVs in dynamic motion, path, navigation, and positioning control are reviewed, along with issues and priorities for future research in this field.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

A FEM based modeling method for analyzing the static performance of aerostatic thrust bearings considering the fluid-structure interaction

Qiang Gao et al.

Summary: This study proposes a finite element method-based fluid-structure interaction modeling method for aerostatic thrust bearings. By building finite element models for the bearings and thrust plates, and considering the change in discharge coefficient, bidirectional data exchange is achieved. The accuracy of the proposed FSI model is verified numerically and experimentally, reducing the average calculation time significantly in the case study.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Marine

Numerical analysis on hydrodynamic characteristics of a deep-sea mining vehicle under three typical motions

Yu Dai et al.

Summary: The numerical analysis on the hydrodynamic characteristics of a deep-sea mining vehicle showed that the turbulent kinetic energy was large near the shape edge of the vehicle and transferred downstream with the flow. Different motions led to variations in spatial hydrodynamic distributions and changes in hydrodynamic coefficients, indicating the need for careful consideration in structure optimization and control system development for the mining vehicle.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Ocean

Optimization design of bionic grousers for the crawled mineral collector based on the deep-sea sediment

Cai Qing et al.

MARINE GEORESOURCES & GEOTECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Prediction of nonlinear viscoelastic behaviour of simulative soil for deep-sea sediment using a thermodynamically compatible model

S. Sumith et al.

INVERSE PROBLEMS IN SCIENCE AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Marine

Resistance and flow field of a submarine in a density stratified fluid

Shuang Liu et al.

OCEAN ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Track shoe structure optimization of deep-sea mining vehicle based on new rheological calculation formulae of sediment

Feng Xu et al.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2019)

添加到收藏夹

Article Engineering, Environmental

Design optimization of deep-seabed pilot miner system with coupled relations between constraints

Su-gil Cho et al.

JOURNAL OF TERRAMECHANICS (2019)

添加到收藏夹

Article Engineering, Marine

Numerical and experimental investigation of the fluid flow on a full-scale pump jet thruster

Amin Talezade Shirazi et al.

OCEAN ENGINEERING (2019)

添加到收藏夹

Article Engineering, Marine

Optimum design of a small intelligent ocean exploration underwater vehicle

Tiedong Zhang et al.

OCEAN ENGINEERING (2019)

添加到收藏夹

Article Engineering, Ocean

Design and analysis of an innovative deep-sea lifting motor pump

Yajuan Kang et al.

APPLIED OCEAN RESEARCH (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Bi-directional evolutionary topology optimization for designing a neutrally buoyant underwater glider

Tengfei Tang et al.

ENGINEERING OPTIMIZATION (2018)

添加到收藏夹

Article Engineering, Mechanical

Structure design and multi-objective optimization of a novel crash box based on biomimetic structure

ChunYan Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Physics, Applied

An analysis of carbon fiber hull structure of a new underwater glider

J. I. Kang et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2018)

添加到收藏夹

Article Engineering, Marine

Design and analysis of the thermal-stress coupled topology optimization of the battery rack in an AUV

Zhaoyong Mao et al.

OCEAN ENGINEERING (2018)

添加到收藏夹

Article Engineering, Marine

Optimization of autonomous underwater vehicle structure shape based on the characteristics of power flow distribution

Guijie Liu et al.

MARINE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Marine

Collaborative optimization and 6 sigma design for composite pressure hull of underwater vehicle based on lamination parameters

Bin Li et al.

JOURNAL OF MARINE SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Marine

Multiple objective multidisciplinary design optimization of heavier-than-water underwater vehicle using CFD and approximation model

Xiaoyi Liu et al.

JOURNAL OF MARINE SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Effect of grouser height on tractive performance of tracked mining vehicle

Junzheng Li et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)

添加到收藏夹

Article Engineering, Marine

Collaborative optimization for ring-stiffened composite pressure hull of underwater vehicle based on lamination parameters

Bin Li et al.

INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Structural optimization of an underwater glider with blended wing body

Yanru He et al.

ADVANCES IN MECHANICAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Marine

Buckling analysis and optimal structural design of supercavitating vehicles using finite element technology

Wanil Byun et al.

International Journal of Naval Architecture and Ocean Engineering (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Shear creep parameters of simulative soil for deep-sea sediment

Ma Wen-bo et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Suspension principle of deep-ocean nodule collector

Zheng Hao et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simulations of a stress and contact model in a chemical mechanical polishing process

Yeou-Yih Lin et al.

THIN SOLID FILMS (2009)

添加到收藏夹

Article Automation & Control Systems

Slip control system for a deep-sea mining machine

K. Herzog et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2007)

添加到收藏夹

Article Engineering, Mechanical

Time-dependent hydroelastic analysis of cavitating propulsors

Y. L. Young

JOURNAL OF FLUIDS AND STRUCTURES (2007)

添加到收藏夹

Article Management

Small response surface designs for metamodel estimation

I Batmaz et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.