4.8 Article

Universal Molecular Control Strategy for Scalable Fabrication of Perovskite Light-Emitting Diodes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Wide-Bandgap Perovskite Quantum Dots in Perovskite Matrix for Sky-Blue Light-Emitting Diodes

Yuan Liu et al.

Summary: This study developed a novel CsPbBr3 QD-in-perovskite matrix solid that exhibited high luminescent efficiency and spectral stability. The modulation of perovskite E-g and the passivation of the material were achieved through alloying and specific coordination, leading to enhanced air- and photo-stability.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Article Materials Science, Multidisciplinary

Interface engineering improves the performance of green perovskite light-emitting diodes

Ming-Lei Guo et al.

Summary: A rational interface engineering method was proposed to enhance the interfacial crystallization and radiative recombination of perovskite films in order to achieve high-performance perovskite light-emitting diodes.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Article Nanoscience & Nanotechnology

Exploiting the full advantages of colloidal perovskite nanocrystals for large-area efficient light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, highly efficient large-area PeLEDs with high uniformity were achieved through the use of colloidal perovskite nanocrystals. The precrystallized PNCs were not affected by the film formation process and a modified bar-coating method facilitated the formation of uniform large-area films. This method shows promise for the development of large-scale industrial displays and solid-state lighting.

NATURE NANOTECHNOLOGY (2022)

Article Optics

Solution-processed green and blue quantum-dot light-emitting diodes with eliminated charge leakage

Yunzhou Deng et al.

Summary: This study demonstrates high quantum efficiency and excellent stability of green and blue QD-LEDs. By using hole-transport polymers with low electron affinity and reduced energetic disorder, electron leakage at the organic/inorganic interface is successfully eliminated. This research is expected to provide a general strategy for eliminating charge leakage in solution-processed LEDs featuring organic/inorganic interfaces.

NATURE PHOTONICS (2022)

Article Optics

Ultrastable near-infrared perovskite light-emitting diodes

Bingbing Guo et al.

Summary: This study demonstrates ultrastable and efficient perovskite light-emitting diodes for near-infrared light source. The introduction of a dipolar molecular stabilizer enhances the stability by preventing phase transformation and decomposition of the perovskite.

NATURE PHOTONICS (2022)

Article Engineering, Electrical & Electronic

Multifunctional NdBr3 Modifier Enables Remarkable Enhancement in the Performance of Perovskite Light-Emitting Diodes

Nan Liu et al.

Summary: Quasi-2D perovskites have advantages of large exciton binding energy and quantum confinement effects over 3D perovskites, attracting extensive attention in the field of optoelectronic devices. However, the negative effects between the perovskite emission layer and the commonly used hole transport layer degrade device performance. By modifying the hole transport layer (PEDOT:PSS) with NdBr3, we achieved high performance LED with enhanced brightness and efficiency.

IEEE ELECTRON DEVICE LETTERS (2022)

Article Multidisciplinary Sciences

Large-area and efficient perovskite light-emitting diodes via low-temperature blade-coating

Shenglong Chu et al.

Summary: Efficient large-area perovskite light emitting diodes for mass production are hindered by difficulties in obtaining uniform films and high costs. The authors demonstrate sol-gel engineering of low-temperature blade-coated perovskite films, which can address these limitations.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Ligand-engineered bandgap stability in mixed-halide perovskite LEDs

Yasser Hassan et al.

Summary: By utilizing multidentate ligands to treat mixed-halide perovskite nanocrystals, efficient and color-stable red electroluminescence with a wavelength centered at 620 nanometers and an external quantum efficiency of 20.3% has been achieved. The key function of the ligand treatment is to 'clean' the nanocrystal surface by removing lead atoms, which suppresses the formation of iodine Frenkel defects and halide segregation. This work demonstrates the sensitivity of metal halide perovskites to surface properties and provides a pathway to control surface defect formation and migration, crucial for achieving bandgap stability for light emission and potentially impacting other optoelectronic applications.

NATURE (2021)

Article Multidisciplinary Sciences

Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices

Lingmei Kong et al.

Summary: By incorporating MeS additives to modify quasi-2D RP perovskite films, the structure is reconstructed, energy transfer is enhanced, and defect density is reduced, leading to improved light emission efficiency and device performance.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

High-performance large-area quasi-2D perovskite light-emitting diodes

Changjiu Sun et al.

Summary: The performance of perovskite light-emitting diodes tends to decline as the active area increases, with severe phase-segregation identified as the cause. The introduction of L-Norvaline to construct an intermediate phase has successfully suppressed the phase-segregation, resulting in highly-efficient large-area quasi-2D films.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Perovskite Light-Emitting Diodes with EQE Exceeding 28% through a Synergetic Dual-Additive Strategy for Defect Passivation and Nanostructure Regulation

Zhe Liu et al.

Summary: A synergetic dual-additive strategy was used to prepare perovskite films with low defect density and high environmental stability, leading to the formation of perovskite nanocrystals with a quasi-core/shell structure that exhibited improved stability and efficiency in green PeLEDs.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

Peipei Du et al.

Summary: The article discusses the fabrication of efficient CsPbBr3 PeLEDs using a vacuum deposition technique, achieving an external quantum efficiency (EQE) of 8.0% and demonstrating a functional area PeLED of 40.2 cm(2) for potential display applications. The strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

NATURE COMMUNICATIONS (2021)

Article Materials Science, Multidisciplinary

Improved performance of perovskite light-emitting diodes with a NaCl doped PEDOT:PSS hole transport layer

Xiaokun Huang et al.

Summary: The performance of perovskite light-emitting diodes (PeLEDs) can be enhanced by doping alkali halide (NaCl) in PEDOT:PSS, reducing exciton quenching and improving charge balance. This leads to higher luminance and current efficiency in PeLEDs.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Optics

Large-area near-infrared perovskite light-emitting diodes

Xiaofei Zhao et al.

NATURE PHOTONICS (2020)

Article Nanoscience & Nanotechnology

Boosting the Efficiency of NiOx-Based Perovskite Light-Emitting Diodes by Interface Engineering

Haoran Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Multidisciplinary Sciences

Properties and potential optoelectronic applications of lead halide perovskite nanocrystals

Maksym V. Kovalenko et al.

SCIENCE (2017)

Article Multidisciplinary Sciences

Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes

Liuqi Zhang et al.

NATURE COMMUNICATIONS (2017)

Article Nanoscience & Nanotechnology

Perovskite energy funnels for efficient light-emitting diodes

Mingjian Yuan et al.

NATURE NANOTECHNOLOGY (2016)

Article Chemistry, Multidisciplinary

Multicolored Organic/Inorganic Hybrid Perovskite Light-Emitting Diodes

Young-Hoon Kim et al.

ADVANCED MATERIALS (2015)

Article Multidisciplinary Sciences

Solution-processed, high-performance light-emitting diodes based on quantum dots

Xingliang Dai et al.

NATURE (2014)

Article Nanoscience & Nanotechnology

Bright light-emitting diodes based on organometal halide perovskite

Zhi-Kuang Tan et al.

NATURE NANOTECHNOLOGY (2014)

Review Chemistry, Physical

Wetting transitions

D Bonn

CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2001)