☆ 4.5 Article

Process flowsheet development for selective arsenic removal, lead and antimony recovery from lead softening slag

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Selective removal of arsenic from crude antimony trioxide by leaching with nitric acid

Hongbin Ling et al.

Summary: The study successfully removed arsenic from crude antimony trioxide using a nitric acid leaching method, achieving high selectivity for arsenic removal and antimony recovery. The arsenic removal ratio reached 86%, while the antimony leaching ratio was only 0.3%, with successful conversion to antimony oxide suitable for commercial production.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

A review of the technologies for antimony recovery from refractory ores and metallurgical residues

Hongbin Ling et al.

Summary: The global reserve of antimony is declining while demand continues to grow, making it an increasingly scarce metal. Little antimony has been recovered from waste plastics, leading many countries to rely on recovering antimony from refractory ores and metallurgical residues. Various innovative processes have been proposed for efficient and selective antimony recovery with minimal cost and impact.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2022)

添加到收藏夹

Article Engineering, Environmental

Resilience in the antimony supply chain

Susan van den Brink et al.

Summary: This study examines the resilience mechanisms and price feedback loops in the antimony supply chain. It finds that the diversity of antimony supply is low, but recycling contributes significantly. Substitution is possible for some applications, but not for flame retardants. Stockpiling plays a significant role in supply disruptions. Recommendations include improving antimony recycling, diversifying production capabilities, and exploring stockpiles.

RESOURCES CONSERVATION AND RECYCLING (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Characterization of antimony-containing metallurgical residues for antimony recovery

Hongbin Ling et al.

Summary: This paper presents a comprehensive characterization of three typical Sb-containing metallurgical residues, including their particle size distribution, chemical composition, morphology, and thermal transitions. Experimental studies on phase equilibria in antimony slag at 1000 degrees C were conducted to determine the distribution of Sb within different phases. Feasible Sb recovery technologies were proposed and critically discussed based on the characterization results.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Antimony Recovery from Lead-Rich Dross of Lead Smelter and Conversion into Antimony Oxide Chloride (Sb4O5Cl2)

Thupten Palden et al.

Summary: Antimony was selectively leached from a lead-rich industrial process residue by using hydrochloric acid in ethanol, achieving a high leaching efficiency of antimony and a low codissolution of lead. The dissolved antimony was recovered as high-purity antimony oxide chloride by hydrolysis precipitation, while the remaining ethanol in the pregnant leach solution was distilled for reuse. This valorization process contributes to sustainability and greenness.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Recovery of Copper and Precious Metals and Separation of Lead from Flue Dust of Electronic Waste Processing

Hyunju Lee et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Leaching kinetics of tellurium-bearing materials in alkaline sulfide solutions

Zhipeng Xu et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Selective nitric acid leaching for recycling of lead-bearing solder dross

Z. T. Ichlas et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Engineering, Chemical

Preparation of calcium stannate from lead refining slag by alkaline leaching-purification-causticization process

Wei y Liu et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Chemical

Direct preparation of sodium stannate from lead refining dross after NaOH roasting-water leaching

Dixiu Wu et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Selective leaching of Pb, Cu, Ni and Zn from secondary lead smelting residues

E. Kim et al.

HYDROMETALLURGY (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Development of Secondary Antimony Oxides from Metallurgical Slags for the Application in Plastic Products

Florian Binz et al.

JOURNAL OF SUSTAINABLE METALLURGY (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Antimony Recovery from End-of-Life Products and Industrial Process Residues: A Critical Review

David Dupont et al.

JOURNAL OF SUSTAINABLE METALLURGY (2016)

添加到收藏夹

Article Engineering, Chemical

Recovery of Antimony Trioxide Flame Retardants from Lead Refining Residues by Slag Conditioning and Fuming

Florian Binz et al.

CHEMIE INGENIEUR TECHNIK (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Leaching behavior of metals from copper anode slime using an alkali fusion-leaching process

Dong Li et al.

HYDROMETALLURGY (2015)

添加到收藏夹

Article Multidisciplinary Sciences

A green lead hydrometallurgical process based on a hydrogen-lead oxide fuel cell

Junqing Pan et al.

NATURE COMMUNICATIONS (2013)

添加到收藏夹

Article Chemistry, Physical

The refining of secondary lead for use in advanced lead-acid batteries

Timothy W. Ellis et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Thermodynamics

Thermal transformations of lead oxides

K. Gavrichev et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2008)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Recovery of copper, tin and lead from the spent nitric etching solutions of printed circuit board and regeneration of the etching solution

MS Lee et al.

HYDROMETALLURGY (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrometallurgically treating antimony-bearing industrial wastes

CG Anderson

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.