相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Tailoring alloy 718 laser directed energy deposition process strategies for repair applications
Cory D. Jamieson et al.
JOURNAL OF LASER APPLICATIONS (2022)
Study of residual stress and microstructural evolution in as-deposited and inter-pass rolled wire plus arc additively manufactured Inconel 718 alloy after ageing treatment
Jan Honnige et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Multiscale prediction of microstructure length scales in metallic alloy casting
B. Bellon et al.
ACTA MATERIALIA (2021)
Laser powder bed fusion of titanium aluminides: An investigation on site-specific microstructure evolution mechanism
Xing Zhang et al.
MATERIALS & DESIGN (2021)
A Review on Additive Manufacturing of Titanium Alloys for Aerospace Applications: Directed Energy Deposition and Beyond Ti-6Al-4V
Zhiying Liu et al.
JOM (2021)
Solidification microstructure and residual stress correlations in direct energy deposited type 316L stainless steel
Da Guo et al.
MATERIALS & DESIGN (2021)
On the interaction of microstructural morphology with residual stress in fiber laser welding of austenitic stainless steel
Bikash Kumar et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)
Review of Aluminum Alloy Development for Wire Arc Additive Manufacturing
Geir Langelandsvik et al.
MATERIALS (2021)
Analytical modeling of residual stress in direct metal deposition considering scan strategy
Elham Mirkoohi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Thermo-mechanical modeling of thermal stress in metal additive manufacturing considering elastoplastic hardening
Elham Mirkoohi et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2020)
Advances in additive manufacturing process simulation: Residual stresses and distortion predictions in complex metallic components
Xu Song et al.
MATERIALS & DESIGN (2020)
Mechanical and microstructural testing of wire and arc additively manufactured sheet material
Pinelopi Kyvelou et al.
MATERIALS & DESIGN (2020)
Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components
Camille Guevenoux et al.
OPTICS AND LASER TECHNOLOGY (2020)
Review on residual stress in selective laser melting additive manufacturing of alloy parts
Ze-Chen Fang et al.
OPTICS AND LASER TECHNOLOGY (2020)
Analytical mechanics modeling of in-process thermal stress distribution in metal additive manufacturing
Elham Mirkoohi et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Processing a non-weldable nickel-base superalloy by Selective Laser Melting: role of the shape and size of the melt pools on solidification cracking
D. Grange et al.
MATERIALIA (2020)
Effect of Solidification Defects and HAZ Softening on the Anisotropic Mechanical Properties of a Wire Arc Additive-Manufactured Low-Carbon Low-Alloy Steel Part
Mahya Ghaffari et al.
JOM (2019)
Effect of printing parameters in 3D concrete printing: Printing region and support structures
Yi Wei Daniel Tay et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Thermomechanical behavior of laser metal deposited Inconel 718 superalloy over a wide range of temperature and strain rate: Testing and constitutive modeling
Kangbo Yuan et al.
MECHANICS OF MATERIALS (2019)
A Further Analysis on Ti6Al4V Lattice Structures Manufactured by Selective Laser Melting
Saverio Maietta et al.
JOURNAL OF HEALTHCARE ENGINEERING (2019)
Phase transformation effect in distortion and residual stress of thin-sheet laser welded Ti-alloy
Bikash Kumar et al.
OPTICS AND LASERS IN ENGINEERING (2019)
Thermophysical properties of Inconel 718 alloy
A. Sh Agazhanov et al.
XXXV SIBERIAN THERMOPHYSICAL SEMINAR, 2019 (2019)
Additive manufacturing of multi-material structures
Amit Bandyopadhyay et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
Review on powder-bed laser additive manufacturing of Inconel 718 parts
Xiaoqing Wang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Effect of directed energy deposition processing parameters on laser deposited Inconel® 718: Microstructure, fusion zone morphology, and hardness
Nathan A. Kistler et al.
JOURNAL OF LASER APPLICATIONS (2017)
Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting
L. Y. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718
Naresh Nadammal et al.
MATERIALS & DESIGN (2017)
Computationally efficient finite difference method for metal additive manufacturing: A reduced-order DFAM tool applied to SLM
Matthew McMillan et al.
MATERIALS & DESIGN (2017)
An improved prediction of residual stresses and distortion in additive manufacturing
T. Mukherjee et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti-6Al-4V components
Blanka A. Szost et al.
MATERIALS & DESIGN (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
Erik R. Denlinger et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
Yanjin Lu et al.
OPTICS AND LASER TECHNOLOGY (2015)
Temperature dependent work hardening in Ti-6Al-4V alloy over large temperature and strain rate ranges: Experiments and constitutive modeling
Guang Chen et al.
MATERIALS & DESIGN (2015)
Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
V. Manvatkar et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
Qingbo Jia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Heat transfer and material flow during laser assisted multi-layer additive manufacturing
V. Manvatkar et al.
JOURNAL OF APPLIED PHYSICS (2014)
Analysis of Steady State Creep in Whisker Reinforced Functionally Graded Thick Cylinder Subjected to Internal Pressure by Considering Residual Stress
Tejeet Singh et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2014)
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
Amanda S. Wu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Effect of Fluid Convection on Dendrite Arm Spacing in Laser Deposition
Yousub Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Experimental Study of Direct Laser Deposition of Ti-6Al-4V and Inconel 718 by Using Pulsed Parameters
Kamran Shah et al.
SCIENTIFIC WORLD JOURNAL (2014)
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V
Chunlei Qiu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
Jean-Pierre Kruth et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Residual stresses in laser direct metal deposited Waspaloy
R. J. Moat et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Modelling of the melt pool geometry in the laser deposition of nickel alloys using the anisotropic enhanced thermal conductivity approach
A. M. Kamara et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
Investigations on residual stresses and deformations in selective laser melting
Michael F. Zaeh et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2010)
Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures
Srikanth Bontha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
G. P. Dinda et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Residual stresses in LENS-deposited AISI 410 stainless steel plates
Liang Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Transport phenomena during direct metal deposition
X. He et al.
JOURNAL OF APPLIED PHYSICS (2007)
Numerical simulation of heat transfer and fluid flow in coaxial laser cladding process for direct metal deposition
Huan Qi et al.
JOURNAL OF APPLIED PHYSICS (2006)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Residual stresses in LENS® components using neutron diffraction and contour method
P Rangaswamy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
A model of solidification microstructures in nickel-based superalloys: predicting primary dendrite spacing selection
W Wang et al.
ACTA MATERIALIA (2003)
Thermal stresses and deposition patterns in layered manufacturing
AH Nickel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Single-crystal laser deposition of superalloys:: Processing-microstructure maps
M Gäumann et al.
ACTA MATERIALIA (2001)
Overview -: Residual stress part 1 -: Measurement techniques
PJ Withers et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
分享论文
