☆ 4.7 Article

Application of bistable glass-coated microwire for monitoring and measuring the deformations of metal structural members

MEASUREMENT (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Analytical

Tuning of Magnetoimpedance Effect and Magnetic Properties of Fe-Rich Glass-Coated Microwires by Joule Heating

Alvaro Gonzalez et al.

Summary: The influence of Joule heating on the magnetic properties, giant magnetoimpedance (GMI) effect, and domain wall (DW) dynamics of Fe75B9Si12C4 glass-coated microwires was investigated. The results showed a significant increase in GMI ratio in Joule heated samples, particularly at 200 MHz. The hysteresis loops of annealed samples remained rectangular, while a slight decrease in coercivity was observed after treatment. Additionally, a modification of MOKE hysteresis loops and an improvement in DW dynamics were observed upon Joule heating.

SENSORS (2022)

添加到收藏夹

Review Nanoscience & Nanotechnology

Functionalized Fiber-Based Strain Sensors: Pathway to Next-Generation Wearable Electronics

Zekun Liu et al.

Summary: This paper reviews the latest advances in fiber-based wearable strain sensors, including the methods for preparing conductive fibers, the fabrication and sensing mechanisms of state-of-the-art sensors, and their applications in various fields. It also critically analyzes the challenges and future prospects of fiber-based strain sensors.

NANO-MICRO LETTERS (2022)

添加到收藏夹

Article Chemistry, Analytical

Development of Magnetically Soft Amorphous Microwires for Technological Applications

Valentina Zhukova et al.

Summary: Amorphous magnetic microwires are suitable for technological applications due to their excellent magnetic softness and giant magnetoimpedance (GMI) effect. This article provides an overview of several approaches for optimizing the soft magnetic properties and GMI effect of magnetic microwires, and suggests that appropriate heat treatment can further improve the performance.

CHEMOSENSORS (2022)

添加到收藏夹

Review Mechanics

Sampling Moire method for full-field deformation measurement: A brief review

Qinghua Wang et al.

Summary: The sampling Moire (SM) method is a vision-based non-contact deformation measurement method that is essential for structural health monitoring and elucidating material damage mechanisms. This review introduces the basic principle and measurement methods of the SM method, and discusses typical application examples and future development directions.

THEORETICAL AND APPLIED MECHANICS LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Yield strength measurement of ferromagnetic materials based on the inverse magnetostrictive effect

Fei Han et al.

Summary: This paper proposes a non-destructive method for measuring the yield strength of ferromagnetic materials, which is influenced by the microstructure of the material and its inverse magnetostrictive effect. Experimental verification is conducted using an electromagnetic ultrasonic transducer (EMAT) detection system. The relationship between electromagnetic acoustic transducer signals and the static magnetic field strength is extracted to establish a regression model for predicting yield strength, achieving a maximum prediction accuracy of 12.78% on a tested specimen from the same batch.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2022)

添加到收藏夹

Review Optics

Digital full-field photoelasticity of tempered architectural glass: A review

Steffen Dix et al.

Summary: This paper discusses the optical issues that may arise during the tempering process of architectural flat glass, as well as the advances and usage of full-field digital photoelasticity methods. These new techniques can help evaluate the optical quality of tempered glass and measure retardation levels.

OPTICS AND LASERS IN ENGINEERING (2022)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Photoelastic Stress Field Recovery Using Deep Convolutional Neural Network

Bo Tao et al.

Summary: This study proposes a deep convolutional neural network based on the encoder-decoder structure, which accurately decodes stress distribution information from complex photoelastic fringe images. The method is validated on a synthetic dataset and shows promising results.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)

添加到收藏夹

Article Optics

Multi-parameter optical gauge based on mode coupling effect in asymmetric index multi-core fibres

Oskar Arrizabalaga et al.

Summary: An optical gauge based on coupled multi-core fiber is proposed and demonstrated. By breaking the symmetry of the fiber index profile, asymmetric mode coupling is introduced, allowing the fabrication of optical gauges with the capability to detect and differentiate different types of deformation in structures.

OPTICS AND LASERS IN ENGINEERING (2022)

添加到收藏夹

Review Chemistry, Physical

Photoelasticity for Stress Concentration Analysis in Dentistry and Medicine

Miriam Marin-Miranda et al.

Summary: Photoelasticity is an optical technique used in medicine and dentistry to observe and understand biomechanics. In dentistry, it is mainly used in disciplines related to fixed prosthesis implants, while in medicine, it is predominantly used in orthopedic research. However, there are no reports on the use of photoelastic models as teaching aids in either field. Although photoelasticity has been widely used in research, its application in clinical learning has not been fully explored due to limitations in the characteristics of the results obtained.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Breathable and Stretchable Strain Sensors with Insensitive Response to Pressure and Bending

Zekun Liu et al.

Summary: This paper presents a novel wearable strain sensor with high sensitivity and wide sensing range, which is breathable and insensitive to pressure and bending stimuli. It offers a new route for achieving comfortable, high-performance, and anti-jamming strain sensors.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Model and Design of High-Temperature Ultrasonic Sensors for Detecting Position and Temperature Based on Iron-Based Magnetostrictive Wires

Qian Wang et al.

Summary: Three types of magnetostrictive wires with improved magnetostrictive value and high Curie temperature have been successfully prepared for designing ultrasonic sensors. Based on the established signal intensity model, sensors capable of stable operation at high temperatures were designed, providing reliable output signals.

IEEE SENSORS JOURNAL (2021)

添加到收藏夹

Article Instruments & Instrumentation

Design and analysis of magnetostrictive sensors for wireless temperature sensing

Manjunath C. Rajagopal et al.

Summary: Magnetostrictive transducers have potential applications in wireless thermometry, with material properties playing a key role in determining temperature sensitivity. Experimental results show that using Terfenol as the sensor material can significantly improve the temperature coefficient of resonance frequency (TCF). Additionally, an alternate temperature sensing technique is proposed to simplify instrument complexity.

REVIEW OF SCIENTIFIC INSTRUMENTS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Monitoring the strain of beech plywood using a bistable magnetic microwire

M. Al Ali et al.

Summary: The study tested the application of a bistable magnetic microwire as a contactless sensor of strain in beech plywood strips, showing linear increase in magnetic response within a low load range and fluctuation in higher load range. The microwire's high sensitivity allows for a theoretical strain sensitivity down to 6 x 10(-8), enabling self-monitoring of stress.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Automatic strain sensing measurement on steel beam using strain gauge

L. D. Vijay Anand et al.

Summary: Metal beams are widely used in industries, construction, and vehicle structures. Strain gauges are used to measure strain on mild steel beams, with the resistance values changing in response to the load applied. Different process parameters and their effects can be studied through optimization and variance analysis.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

A high performance wearable strain sensor with advanced thermal management for motion monitoring

Cenxiao Tan et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Wearable MXene nanocomposites-based strain sensor with tile-like stacked hierarchical microstructure for broad-range ultrasensitive sensing

Mingyuan Chao et al.

NANO ENERGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cylindrical micro and nanowires: Fabrication, properties and applications

J. Alam et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Biomedical applications of glass-coated microwires

D. Kozejova et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure-based modelling and Digital Image Correlation measurement of strain fields in austenitic stainless steel 316L during tension loading

V. Herrera-Solaz et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Smart composites with embedded magnetic microwire inclusions allowing non-contact stresses and temperature monitoring

Alexandra Allue et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Review Optics

Review of optical fiber sensors for deformation measurement

Haiting Di et al.

OPTIK (2018)

添加到收藏夹

Article Optics

Two-dimensional Moire phase analysis for accurate strain distribution measurement and application in crack prediction

Qinghua Wang et al.

OPTICS EXPRESS (2017)

添加到收藏夹

Proceedings Paper Computer Science, Artificial Intelligence

Prediction of fracture profile using digital image correlation

G. M. S. K. Chaitanya et al.

TWELFTH INTERNATIONAL CONFERENCE ON QUALITY CONTROL BY ARTIFICIAL VISION (2015)

添加到收藏夹

Article Chemistry, Analytical

An Embedded Stress Sensor for Concrete SHM Based on Amorphous Ferromagnetic Microwires

Jesus Olivera et al.

SENSORS (2014)

添加到收藏夹

Article Instruments & Instrumentation

Inductive strain sensing using magnetostrictive wires embedded in carbon fibre laminates

Angelos Christopoulos et al.

SMART MATERIALS AND STRUCTURES (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Assessment of strain measurement techniques to characterise mechanical properties of structural steel

H. B. Motra et al.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2014)

添加到收藏夹

Article Physics, Applied

Giant magnetostriction in Tb-doped Fe83Ga17 melt-spun ribbons

Wei Wu et al.

APPLIED PHYSICS LETTERS (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Possibilities of Measuring Stress and Health Monitoring in Materials Using Contact-Less Sensor Based on Magnetic Microwires

D. Praslicka et al.

IEEE TRANSACTIONS ON MAGNETICS (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.