☆ 4.8 Article

Structural batteries: Advances, challenges and perspectives

MATERIALS TODAY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Multidisciplinary Sciences

Multifactorial engineering of biomimetic membranes for batteries with multiple high-performance parameters

Mingqiang Wang et al.

Summary: In this study, the authors developed a biomimetic aramid nanofiber membrane that effectively suppresses lithium polysulfide diffusion and dendrite growth, while allowing lithium ions to pass through. The membrane exhibits high performance and stability at high temperatures, and can be produced at scale by recycling Kevlar.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Multi-physics design of a new battery packaging for electric vehicles utilizing multifunctional composites

Reza Pejman et al.

Summary: A multi-physics optimization framework is proposed for designing a new battery packaging for electric vehicles. The optimized design increases the driving range of the Tesla Model S by about 23%.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Composites

Experimental and computational characterization of carbon fibre based structural battery electrode laminae

David Carlstedt et al.

Summary: In this paper, the performance of electrode laminae consisting of carbon fibres embedded in structural battery electrolyte (CF-SBE electrodes) is characterized using experimental and numerical techniques. The results show that electrode thickness, electrolyte transport properties, and applied current significantly affect electrochemical performance. The expansion of carbon fibres in the electrolyte also influences the battery performance. The authors expect that these findings will contribute to the development of high-performing carbon fibre-based battery electrode laminae.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Mechanics

Computational modelling of structural batteries accounting for stress-assisted convection in the electrolyte

David Carlstedt et al.

Summary: This paper presents a computational modelling framework for studying the electro-chemo-mechanical properties of structural batteries. The convective contribution to mass transport within the battery electrolyte is found to have a minor influence under certain conditions, but has a noticeable influence under externally applied mechanical loading or large current pulses. The porosity of the electrolyte is also shown to significantly influence the combined mechanical and electro-chemical performance.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Composites

Higher strength carbon fiber lithium-ion polymer battery embedded multifunctional composites for structural applications

Pias Kumar Biswas et al.

Summary: This study proposes and evaluates the structural integrity of a carbon fiber reinforced polymer (CFRP) composite containing encapsulated lithium-ion polymer (Li-Po) batteries. A comparison of different composite structures made of CFRP with lithium-ion batteries as the core was conducted. The results showed that adding electrospun CNT/epoxy nanofibers significantly improved the mechanical strength of the CFRP structure. Additionally, using air-sprayed CNT/epoxy also enhanced the strength of the CFRP structure. Furthermore, electrochemical characterization revealed that the CFRP structure with electrospun CNT/epoxy nanofibers had similar performance to standard lithium-ion pouch cells under loading conditions.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Surface Functionalization of Electrodes and Synthesis of Dual-Phase Solid Electrolytes for Structural Supercapacitors

Feng Huang et al.

Summary: The interface between structural electrodes and solid electrolytes is crucial for the electrical-mechanical properties of energy storage structures. In this study, a surface functionalization method was proposed to enhance the ion conduction efficiency at the interface by using a bicontinuous network of epoxy and ionic liquid (IL). The treatment of carbon fiber (CF) electrodes coated with manganese dioxide (MnO2) with silane resulted in a significant increase of areal capacitance without compromising the tensile strength. The dual-phase electrolyte with 40 wt% IL and 60 wt% epoxy demonstrated the highest multifunctional performance.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Chemomechanics of Rechargeable Batteries: Status, Theories, and Perspectives

Luize Scalco de Vasconcelos et al.

Summary: Mechanical energy and damage associated with redox reactions can significantly affect the thermodynamics and rates of key electrochemical processes in rechargeable batteries. Recent research in this field has improved our understanding, and it is important to consolidate ideas into a structured framework for future work in multidisciplinary fields.

CHEMICAL REVIEWS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Design of structural batteries: carbon fibers and alternative form factors

G. J. H. Lim et al.

Summary: This mini review provides an overview of the current state of structural battery composites, including carbon fiber reinforced and non-carbon fiber materials, and discusses issues related to material selection, environmental adaptation, vibration isolation, and crash safety.

MATERIALS TODAY SUSTAINABILITY (2022)

添加到收藏夹

Article Energy & Fuels

A systematic approach to resolve high impedance of multifunctional energy storage composites

Anthony Bombik et al.

Summary: This study investigates the root cause of increased DC impedance in Multifunctional Energy Storage Composite (MESC) structures and resolves the primary concern by achieving comparable DC impedance to commercial pouch cells. Comprehensive parametric studies, experimental testing, and simulation modeling were conducted to determine the manufacturing limits and address the nonuniform electrolyte wetting issue.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Chemistry, Physical

Stabilizing lithium plating in polymer electrolytes by concentration-polarization- induced transformation

Qian Cheng et al.

Summary: In solid polymer electrolytes, concentration polarization can induce phase transformation, leading to the formation of a mechanically rigid PEO-rich phase, effectively suppressing the growth of lithium whiskers.

JOULE (2022)

添加到收藏夹

Article Chemistry, Physical

A multicell structural battery composite laminate

Johanna Xu et al.

Summary: Multifunctional materials offer lightweight and slender structural solutions for various applications. Using construction materials that can act as batteries and store electrical energy can contribute to highly energy efficient vehicles and aircraft in transportation.

ECOMAT (2022)

添加到收藏夹

Article Engineering, Mechanical

Multifunctional sandwich panel design with lithium-ion polymer batteries

Joel Galos et al.

Summary: This paper investigates the mechanical properties of lithium-ion polymer batteries and their use in automotive design. Experimentally determined shear, flexural, and compression properties of LiPo batteries were applied to analytical models of sandwich panels, discussing the trade-off between mechanical performance and cost in automotive panel design. The practicality of using sandwich composites with LiPo battery cores in automotive applications was also discussed.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Potassium-insertion in polyacrylonitrile-based carbon fibres for multifunctional energy storage, morphing, and strain-sensing

Ross Harnden et al.

Summary: By exploring potassium-insertion in intermediate modulus PAN-based CFs, this study demonstrates the potential for multifunctionality, with electrochemical cycling and mechanical testing showing minimal impact on the CFs' properties, and operando measurements revealing its potential for significant deformations in a morphing structure.

CARBON (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of lithiation on the elastic moduli of carbon fibres

Shanghong Duan et al.

Summary: This study investigates the moduli changes of carbon fibre electrodes under different lithiation states, revealing that the transverse modulus of the lithiated fibre is more than double that of the pristine and delithiated fibres.

CARBON (2021)

添加到收藏夹

Article Energy & Fuels

Structural Power Performance Targets for Future Electric Aircraft

Elitza Karadotcheva et al.

Summary: The study investigated the feasibility of integrating structural power composites into future electric aircraft and assessed the impact on emissions. Results showed that structural power composites could potentially make electric aircraft lighter and safer, while increasing fuel efficiency.

ENERGIES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling electrolyte-immersed tensile property of polypropylene separator for lithium-ion battery

Weigui Xie et al.

Summary: This paper focuses on the tensile properties of Polypropylene separators in terms of electrolyte immersion and rate dependency, combining experiments and simulations to explore the mechanical behavior of wet separators. The modeling precision is reliable and the simulating errors are relatively small, indicating promising applicability and outlook of the modeling method.

MECHANICS OF MATERIALS (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

A Review on Lithium-Ion Battery Separators towards Enhanced Safety Performances and Modelling Approaches

Ao Li et al.

Summary: With the widespread applications of lithium-ion batteries in portable electronics and electric vehicles, the properties of separators have become crucial in ensuring battery safety and performance. Recent advancements in applied materials have led to research progress in enhancing the electrical, fire, and explosion prevention performances of battery separators. Future directions in battery separator research are also being explored to further improve battery safety and performance.

MOLECULES (2021)

添加到收藏夹

Article Thermodynamics

Level set topology optimization of load carrying battery packs

Sandilya Kambampati et al.

Summary: This study presents the optimal design of load carrying battery packs with heat exchange capabilities using a multi-objective optimization approach. The efficiency of the optimized designs is demonstrated through numerical examples by showcasing their multifunctional nature of reducing battery cell temperatures while sustaining a given load.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Review Chemistry, Physical

Recent Progress in Understanding Solid Electrolyte Interphase on Lithium Metal Anodes

Haiping Wu et al.

Summary: The structure, properties, and influencing factors of SEI play a crucial role in the performance of lithium metal batteries. Efficient strategies for tailoring SEI involve understanding the composition, models, and properties of SEI, as well as the correlations between electrolyte components and SEI. Future directions include in-operando techniques, multi-modality approaches for SEI characterization, and artificial intelligence assisted understanding of SEI properties.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Nanocomposite with fast Li+ conducting percolation network: Solid polymer electrolyte with Li+ non-conducting filler

Xin Ao et al.

Summary: A new strategy of constructing a Li+ fast conducting network using CeO2 nanowires in composite solid polymer electrolytes has been proposed, significantly improving the ionic conductivity and demonstrating excellent cycling performance in Li batteries.

NANO ENERGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Copper-coordinated cellulose ion conductors for solid-state batteries

Chunpeng Yang et al.

Summary: By coordinating copper ions with cellulose nanofibrils, this study has developed a high-performance solid polymer ion conductor with molecular channels that enable rapid lithium ion transport, showing promise for safe, high-performance solid-state batteries. This molecular-channel engineering approach shows high lithium ion conductivity, high transference number, and wide electrochemical stability, with implications for applications beyond batteries.

NATURE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Structural ceramic batteries using an earth-abundant inorganic waterglass binder

Alan Ransil et al.

Summary: Sodium trisilicate waterglass, an earth-abundant inorganic adhesive, is demonstrated here as an effective electrode binder for structural batteries. The waterglass binder provides both mechanical rigidity and electrochemical performance, allowing for high rate capability and stable discharge capacity over multiple cycles. The resulting structural batteries exhibit impressive multifunctional performance with high energy density and tensile modulus.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Revealing the Superiority of Fast Ion Conductor in Composite Electrolyte for Dendrite-Free Lithium-Metal Batteries

Hui Chen et al.

Summary: Composite electrolytes composed of nanoceramic and polymer are widely studied for their high ionic conductivity and good Li-ion transference number. This study investigates the addition of fast ion conductive ceramics in composite electrolytes, showing improved Li-ion transference ability and reduced diffusion barrier, leading to impressive cycling stability in Li-metal batteries. The research enriches understanding of fast ion conductors in composite electrolytes and provides guidance for designing high-performance composite electrolytes in rechargeable solid batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Composites

Creating ionic pathways in solid-state polymer electrolyte by using PVA-coated carbon nanofibers

Feng Huang et al.

Summary: The ionic conductivity of solid epoxy-ionic liquid nanocomposite electrolytes can be significantly enhanced by incorporating carbon nanofibers coated with Poly(vinyl alcohol) into the polymer phase. This modified solid electrolyte shows a 38-fold increase in ionic conductivity, making it a promising candidate for high-performance structural batteries or supercapacitors. Additional alignment of carbon nanofibers during curing of the epoxy did not further improve the electrical and mechanical properties of the solid electrolyte.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Composites

Electrophoretic coating of LiFePO4/Graphene oxide on carbon fibers as cathode electrodes for structural lithium ion batteries

Jaime S. Sanchez et al.

Summary: This research utilizes an all-electrostatic approach to functionalize carbon fibers as conductive electrodes in structural batteries, coating them with a cathode material composed of LiFePO4 and nanosheets of electrochemically exfoliated graphene oxide. Experimental results demonstrate the feasibility and efficiency of this coating technique for industrial applications.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Review Energy & Fuels

Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes

Gustavo M. Hobold et al.

Summary: This review examines the trends and key descriptors of Coulombic efficiency in Li-metal batteries over the past five decades, as well as strategies to improve CE. While advancements have been made in cost and energy density of Li-ion batteries, achieving high Coulombic efficiency consistently remains a challenge.

NATURE ENERGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Structural Lithium-Ion Battery Cathodes and Anodes Based on Branched Aramid Nanofibers

Paraskevi Flouda et al.

Summary: This study demonstrates that using branched aramid nanofibers (BANFs) or nanoscale Kevlar fibers as binders can significantly improve the mechanical properties of lithium-ion battery electrodes, achieving up to 2 orders of magnitude improvements in Young's modulus and tensile strength compared to commercial battery electrodes while maintaining good energy storage capabilities.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Advanced Electrolytes Enabling Safe and Stable Rechargeable Li-Metal Batteries: Progress and Prospects

Shuang-Jie Tan et al.

Summary: This article summarizes the challenges of electrolytes in rechargeable Li-metal batteries (RLBs) and proposes requirements for improving battery performance. It also reviews the achievements of liquid- and solid-state electrolytes in RLBs, analyzes their drawbacks, and offers solutions. The article outlines the development strategy of in situ gelation electrolytes and calls for more attention to battery safety research in pouch cell users.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Paper & Wood

Aramid nanofiber reinforced cellulose paper for high-safety lithium-ion batteries

Jiao-Long Pan et al.

Summary: The study focuses on using aramid nanofibers to reinforce commercial cellulose paper, creating a separator with lithium-dendrite suppressing properties, high mechanical strength, and good ionic conductivity, demonstrating its potential in lithium-ion batteries.

CELLULOSE (2021)

添加到收藏夹

Article Materials Science, Composites

Carbon fiber reinforced Zn?MnO2 structural composite batteries

Junyan Chen et al.

Summary: The paper introduces a novel carbon fiber reinforced Zn-MnO2 structural composite battery with excellent tensile strength and high specific capacity, which can be easily manufactured and retains 88.3% capacity after 100 cycles.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Composites

Effects of cathode doping on 3D printed continuous carbon fiber structural battery composites by UV-assisted coextrusion deposition

John M. Pappas et al.

Summary: The study demonstrates the fabrication of a new 3D carbon fiber structural battery composite, achieving energy storage at the fiber level and successfully showcasing structural battery composites with complex geometries. A balance between printability and electrochemical performance is observed due to the cathode doping effect, with comparable electrochemical and mechanical performance to conventional processes.

JOURNAL OF COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes

Darren H. S. Tan et al.

Summary: The research successfully achieved stable operation of silicon anodes by using the interface passivating properties of sulfide solid electrolytes. Analysis showed that this approach eliminates continuous interfacial growth and irreversible lithium losses. The promising performance of microsilicon full cells can be attributed to the ideal interface properties between microsilicon and sulfide electrolytes and the unique chemomechanical behavior of the lithium-silicon alloy.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Bioinspired, Tree-Root-Like Interfacial Designs for Structural Batteries with Enhanced Mechanical Properties

Tianwei Jin et al.

Summary: This research develops a tree-root-like lamination technique that significantly enhances the flexural modulus of batteries while having limited impact on their electrochemical performance. Engineering interfacial adhesion is an effective approach to develop structural batteries with excellent mechanical and electrochemical properties.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Structural Design of Composite Polymer Electrolytes for Solid-state Lithium Metal Batteries

Wenchao Liao et al.

Summary: This review discusses the impact of composite polymer electrolyte structure on ion conduction ability and interfacial compatibility, focusing on issues such as physical contact between electrolyte and electrodes, formation of lithium dendrites and space charge layer, and adaptation to high-voltage cathodes. It also highlights the ion transport mechanism based on structural design and summarizes different inorganic components with various structures.

CHEMNANOMAT (2021)

添加到收藏夹

Article Energy & Fuels

Multifunctional approaches for safe structural batteries

Sergiy Kalnaus et al.

Summary: Recent advancements in Li and Li-ion based energy storage have led to the development of novel electrode materials with higher energy density for applications in transportation. Improvements in specific energy of the system based solely on design of material compositions for multivalent intercalation compounds are limited, necessitating new approaches to enhance both energy density and safety of batteries.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Chemistry, Physical

Optimal electrode-scale design of Li-ion electrodes: A general correlation

Zeyu Hui et al.

Summary: Multi-scale physics-based models are optimized for maximum energy density by adjusting porosity and mass loading. Electrode-scale properties impact optimal design, but can be generalized into convenient correlations that provide guidelines for optimization of electrode architectures. These correlations are consistent with prior optimization results in the literature.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Engineering, Aerospace

Conceptual Multifunctional Design, Feasibility and Requirements for Structural Power in Aircraft Cabins

Sang N. Nguyen et al.

Summary: This paper investigates the potential use of structural power composites in regional aircraft passenger cabins and the challenges to widespread use, focusing on applying these composites in sandwich floor panels to power entertainment systems. The study sets performance targets for electrochemical energy storage based on mechanical models and advanced laminated composites, highlighting significant mass and cost savings with the use of a distributed energy storage system. Analysis on an Airbus A220-100 predicts potential mass and volume savings, as well as reductions in CO2 and NOx emissions, showcasing the far-reaching implications and systemic benefits of implementing structural power materials.

JOURNAL OF AIRCRAFT (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Thermally Stable and Nonflammable Electrolytes for Lithium Metal Batteries: Progress and Perspectives

Qian-Kui Zhang et al.

Summary: The article discusses the thermal runaway mechanisms of lithium metal batteries, measurement methods for thermal stability and nonflammability of liquid electrolytes, as well as recent progress in nonflammable electrolytes for lithium metal batteries. Future perspectives on designing thermally stable and nonflammable electrolytes for lithium metal batteries are also presented.

SMALL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

An acoustic micro-transmitter enabling tracking of sensitive aquatic species in riverine and estuarine environments

Zhiqun D. Deng et al.

Summary: The use of acoustic micro-transmitters plays a crucial role in studying and protecting aquatic species by accurately tracking their movements without disrupting their natural behavior. The lightweight and compact size of the transmitter allow for successful detection of tagged fish in field studies, providing valuable insights for ecological and environmental policy making worldwide.

CELL REPORTS PHYSICAL SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent advancements of functional gel polymer electrolytes for rechargeable lithium-metal batteries

Sha Fu et al.

Summary: This article presents the composition and working principle of lithium-metal batteries, as well as the current challenges and solutions in the application of gel polymer electrolytes.

MATERIALS CHEMISTRY FRONTIERS (2021)

添加到收藏夹

Review Chemistry, Physical

Advanced separators based on aramid nanofiber (ANF) membranes for lithium-ion batteries: a review of recent progress

Bin Yang et al.

Summary: Lithium-ion batteries have greatly impacted daily life, industrial manufacturing, and energy storage. While the separator is an inactive component, it plays a crucial role in the battery's capacity, cycle performance, and safety. Aramid nanofiber (ANF)-based membranes are promising candidates for next-generation separators due to their superior qualities and unique structure.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

A Structural Battery and its Multifunctional Performance

Leif E. Asp et al.

Summary: This study demonstrates a structural battery composite with unprecedented multifunctional performance, which can play a significant role in lightweight design. The structural battery is made from multifunctional constituents, including reinforcing carbon fibers, structural electrolyte, and glass fiber fabric.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Electro-chemo-mechanics of lithium in solid state lithium metal batteries

Yongfu Tang et al.

Summary: This review discusses the current status of solid state lithium metal batteries and the challenges they face, summarizing issues related to lithium dendrite penetration through SSEs, detrimental interfacial reactions, and proposing possible mitigation strategies.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nacre-Inspired Composite Electrolytes for Load-Bearing Solid-State Lithium-Metal Batteries

Aijun Li et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Materials Science, Composites

Matrix and interface cracking in cross-ply composite structural battery under combined electrochemical and mechanical loading

Johanna Xu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

High Modulus, Thermally Stable, and Self-Extinguishing Aramid Nanofiber Separators

Anish Patel et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Mechanics

Compression properties of multifunctional composite structures with embedded lithium-ion polymer batteries

P. Attar et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Performance analysis framework for structural battery composites in electric vehicles

David Carlstedt et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Electrochemistry

A Flexible and Conductive Binder with Strong Adhesion for High Performance Silicon-Based Lithium-Ion Battery Anode

Ruixian Tang et al.

CHEMELECTROCHEM (2020)

添加到收藏夹

Article Chemistry, Physical

Silicon Anode with High Initial Coulombic Efficiency by Modulated Trifunctional Binder for High-Areal-Capacity Lithium-Ion Batteries

Zeheng Li et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes

Abhik Banerjee et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Review Engineering, Chemical

Epoxy-Based Hybrid Structural Composites with Nanofillers: A Review

Sarath Sasidharan et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Engineering, Manufacturing

Tensile properties of multifunctional composites embedded with lithium-ion polymer batteries

K. Pattarakunnan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Editorial Material Chemistry, Physical

High-Performance Structural Batteries

Brandon J. Hopkins et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbon Fibers with High Electrical Conductivity: Laser Irradiation of Mesophase Pitch Filaments Obtains High Graphitization Degree

Zhenghe Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Mechanically-robust structural lithium-sulfur battery with high energy density

Wenlong Huang et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Lithium Substituted Poly(acrylic acid) as a Mechanically Robust Binder for Low-Cost Silicon Microparticle Electrodes

Dingying Dang et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

Vanadyl Phosphates AxVOPO4 (A = Li, Na, K) as Multielectron Cathodes for Alkali-Ion Batteries

Natasha A. Chernova et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Fabrication and multiphysics modeling of modified carbon fiber as structural anodes for lithium-ion batteries

Sha Yin et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Designing composite solid-state electrolytes for high performance lithium ion or lithium metal batteries

Tengfei Zhang et al.

CHEMICAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Carbon fiber reinforced structural lithium-ion battery composite: Multifunctional power integration for CubeSats

Kathleen Moyer et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Structural reduced graphene oxide supercapacitors mechanically enhanced with tannic acid

Paraskevi Flouda et al.

SUSTAINABLE ENERGY & FUELS (2020)

添加到收藏夹

Article Chemistry, Physical

Polymer reinforced carbon fiber interfaces for high energy density structural lithium-ion batteries

Kathleen Moyer et al.

SUSTAINABLE ENERGY & FUELS (2020)

添加到收藏夹

Review Chemistry, Physical

The potential of Kevlar aramid nanofiber composite membranes

Yan Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Chemical interaction and enhanced interfacial ion transport in a ceramic nanofiber-polymer composite electrolyte for all-solid-state lithium metal batteries

Hui Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Electrochemistry

Review-Emerging Trends in the Design of Electrolytes for Lithium and Post-Lithium Batteries

E. Quartarone et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Engineering, Aerospace

Modular Multifunctional Composite Structure for CubeSat Applications: Preliminary Design and Structural Analysis

Giorgio Capovilla et al.

AEROSPACE (2020)

添加到收藏夹

Review Electrochemistry

Review-Polymer Electrolytes for Rechargeable Batteries: From Nanocomposite to Nanohybrid

Nicola Boaretto et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Printing with 3D continuous carbon fiber multifunctional composites via UV-assisted coextrusion deposition

Aditya Thakur et al.

MANUFACTURING LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A more stable lithium anode by mechanical constriction for solid state batteries

Yibo Su et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Materials Science, Composites

Tensile properties of CFRP manufactured by resin transfer molding considering stacking sequences at various strain rates

Jesung Yoo et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

A review on modeling of electro-chemo-mechanics in lithium-ion batteries

Ying Zhao et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Chemistry, Physical

Multifunctional energy storage composite structures with embedded lithium-ion batteries

Purim Ladpli et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nonflammable, Low-Cost, and Fluorine-Free Solvent for Liquid Electrolyte of Rechargeable Lithium Metal Batteries

Tianwei Jin et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Mechanics

High performance functional composites by in-situ orientation of carbon nanofillers

G. Singer et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Vibration and acoustic properties of composites with embedded lithium-ion polymer batteries

Joel Galos et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Composites

Thermal and diffusion induced stresses in a structural battery under galvanostatic cycling

David Carlstedt et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Deformation and failure of lithium-ion batteries treated as a discrete layered structure

Juner Zhu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Mechanically strong MXene/Kevlar nanofiber composite membranes as high-performance nanofluidic osmotic power generators

Zhen Zhang et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Conductive Core-Shell Aramid Nanofibrils: Compromising Conductivity with Mechanical Robustness for Organic Wearable Sensing

Xiangsheng Han et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Materials Science, Composites

Effects of state of charge on elastic properties of 3D structural battery composites

David Carlstedt et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes

Xin-Bing Cheng et al.

CHEM (2019)

添加到收藏夹

Review Chemistry, Physical

Strategic Structural Design of a Gel Polymer Electrolyte toward a High Efficiency Lithium-Ion Battery

Febri Baskoro et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Article Electrochemistry

Free-Standing PEO/LiTFSI/LAGP Composite Electrolyte Membranes for Applications to Flexible Solid-State Lithium-Based Batteries

Jeremy Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Review Chemistry, Physical

Recent progress on solid-state hybrid electrolytes for solid-state lithium batteries

Jianneng Liang et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Bicontinuous Electrolytes via Thermally Initiated Polymerization for Structural Lithium Ion Batteries

Lynn M. Schneider et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multilayered Membrane Electrolytes Based on Aramid Nanofibers for High-Temperature Proton Exchange Membrane Fuel Cells

Lei Liu et al.

ACS APPLIED NANO MATERIALS (2019)

添加到收藏夹

Article Electrochemistry

Interfacial Engineering of Reduced Graphene Oxide for Aramid Nanofiber-Enabled Structural Supercapacitors

Paraskevi Flouda et al.

BATTERIES & SUPERCAPS (2019)

添加到收藏夹

Article Chemistry, Physical

Data-Driven Safety Envelope of Lithium-Ion Batteries for Electric Vehicles

Wei Li et al.

JOULE (2019)

添加到收藏夹

Review Chemistry, Physical

Gel Polymer Electrolytes for Electrochemical Energy Storage

Xunliang Cheng et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Promises, Challenges, and Recent Progress of Inorganic Solid-State Electrolytes for All-Solid-State Lithium Batteries

Zhonghui Gao et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Novel application of graphene oxide to improve hydrophilicity and mechanical strength of aramid nanofiber hybrid membrane

Fang Wang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Composites

Lithium iron phosphate coated carbon fiber electrodes for structural lithium ion batteries

Johan Hagberg et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries

Stefanie Zekoll et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A multifunctional polymer electrolyte enables ultra-long cycle-life in a high-voltage lithium metal battery

Tiantian Dong et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Materials Science, Composites

Carbon fiber composites with battery function: Stresses and dimensional changes due to Li-ion diffusion

Johanna Xu et al.

JOURNAL OF COMPOSITE MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

A review of safety-focused mechanical modeling of commercial lithium-ion batteries

Juner Zhu et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Materials Science, Composites

Multiphysics modeling of mechanical and electrochemical phenomena in structural composites for energy storage: Single carbon fiber micro-battery

Johanna Xu et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)

添加到收藏夹

Article Electrochemistry

Testing and Modeling the Mechanical Properties of the Granular Materials of Graphite Anode

Juner Zhu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Physical

SiO2-Enhanced Structural Stability and Strong Adhesion with a New Binder of Konjac Glucomannan Enables Stable Cycling of Silicon Anodes for Lithium-Ion Batteries

Songtao Guo et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries

Ziqi Zeng et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multifunctional Epoxy-Based Solid Polymer Electrolytes for Solid-State Supercapacitors

Suk Jin Kwon et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Materials Science, Composites

Multifunctional performance of a carbon fiber UD lamina electrode for structural batteries

Wilhelm Johannisson et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Temperature-dependent on/off PVP@TiO2 separator for safe Li-storage

Yunhong Jiang et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Integrative preparation of mesoporous epoxy resin-ceramic composite electrolytes with multilayer structure for dendrite-free lithium metal batteries

Mengjie Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Electrochemistry

Multifunctional Performance of Sodiated Carbon Fibers

Ross Harnden et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

添加到收藏夹

Review Electrochemistry

Structural Design of Lithium-Sulfur Batteries: From Fundamental Research to Practical Application

Xiaofei Yang et al.

ELECTROCHEMICAL ENERGY REVIEWS (2018)

添加到收藏夹

Article Chemistry, Physical

Limiting Internal Short-Circuit Damage by Electrode Partition for Impact-Tolerant Li-Ion Batteries

Michael Naguib et al.

JOULE (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Alternative binders for sustainable electrochemical energy storage - the transition to aqueous electrode processing and bio-derived polymers

Dominic Bresser et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of Li0.33La0.567TiO3

Karl G. Schell et al.

JOURNAL OF MATERIALS SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li-S battery

Jie Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Physics, Applied

Sigmoidal current collector for lithium-ion battery

Meng Wang et al.

JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Article Chemistry, Analytical

Synthesis and performances of carbon fiber@Co3O4 based on metal organic frameworks as anode materials for structural lithium-ion battery

Fangxue Wang et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multifunctional structural lithium-ion battery for electric vehicles

Yancheng Zhang et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2017)

添加到收藏夹

Article Chemistry, Physical

An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery

Dongsheng Ren et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Review Chemistry, Physical

Water Soluble Binder, an Electrochemical Performance Booster for Electrode Materials with High Energy Density

Jun-Tao Li et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Structural lithium ion battery electrolytes via reaction induced phase-separation

N. Ihrner et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Physical

An interpenetrating network poly(diethylene glycol carbonate)-based polymer electrolyte for solid state lithium batteries

Xiaochen Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Physical

High-voltage and free-standing poly(propylene carbonate)/Li6.75La3Zr1.75Ta0.25O12 composite solid electrolyte for wide temperature range and flexible solid lithium ion battery

Jianjun Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Outlook on Lithium Ion Battery Technology

Arumugam Manthiram

ACS CENTRAL SCIENCE (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

Lithium battery chemistries enabled by solid-state electrolytes

Arumugam Manthiram et al.

NATURE REVIEWS MATERIALS (2017)

添加到收藏夹

Article Mechanics

A model to analyse deformations and stresses in structural batteries due to electrode expansions

Filippo Dionisi et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biomimetic Hybridization of Kevlar into Silk Fibroin: Nanofibrous Strategy for Improved Mechanic Properties of Flexible Composites and Filtration Membranes

Lili Lv et al.

ACS NANO (2017)

添加到收藏夹

Article Materials Science, Composites

Multifunctional structural lithium ion batteries based on carbon fiber reinforced plastic composites

Yalin Yu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanically Strong Graphene/Aramid Nanofiber Composite Electrodes for Structural Energy and Power

Se Ra Kwon et al.

ACS NANO (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

High-voltage positive electrode materials for lithium-ion batteries

Wangda Li et al.

CHEMICAL SOCIETY REVIEWS (2017)

添加到收藏夹

Article Chemistry, Physical

Elastic Properties of the Solid Electrolyte Li7La3Zr2O12 (LLZO)

Seungho Yu et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Comprehensive Understanding of High Polar Polyacrylonitrile as an Effective Binder for Li-Ion Battery Nano-Si Anodes

Lei Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Electrocoating of carbon fibres at ambient conditions

Angelika Bachinger et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Review Mathematics, Interdisciplinary Applications

Computational modeling of Li-ion batteries

D. Grazioli et al.

COMPUTATIONAL MECHANICS (2016)

添加到收藏夹

Article Electrochemistry

High Precision Coulometry of Commercial PAN-Based Carbon Fibers as Electrodes in Structural Batteries

Johan Hagberg et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

添加到收藏夹

Article Physics, Multidisciplinary

Combining electrospinning and sputtering to improve rechargeable lithium battery cathodes: coating carbon fibre felt with nickel sulfide

Dong Kyu Lee et al.

PHYSICA SCRIPTA (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Chemically Bonded Sn Nanoparticles Using the Crosslinked Epoxy Binder for High Energy-Density Li Ion Battery

Yun-Xiao Wang et al.

ADVANCED MATERIALS INTERFACES (2016)

添加到收藏夹

Review Chemistry, Physical

All solid-state polymer electrolytes for high-performance lithium ion batteries

Liping Yue et al.

ENERGY STORAGE MATERIALS (2016)

添加到收藏夹

Review Chemistry, Physical

Carbon surface functionalities and SEI formation during Li intercalation

John Collins et al.

CARBON (2015)

添加到收藏夹

Article Materials Science, Composites

Performance metrics for structural composites with electrochemical multifunctionality

J. F. Snyder et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Li-ion battery materials: present and future

Naoki Nitta et al.

MATERIALS TODAY (2015)

添加到收藏夹

Article Multidisciplinary Sciences

A dendrite-suppressing composite ion conductor from aramid nanofibres

Siu-On Tung et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Materials Science, Composites

Mechanical and Water Binding Properties of Carboxymethyl Cellulose/Multiwalled Carbon Nanotube Nanocomposites

Seyed Mohammad Mahdi Dadfar et al.

POLYMER COMPOSITES (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling mechanical stress and exfoliation damage in carbon fiber electrodes subjected to cyclic intercalation/deintercalation of lithium ions

Andrejs Pupurs et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Materials Science, Composites

Manufacturability of composite laminates with integrated thin film Li-ion batteries

Federico Gasco et al.

JOURNAL OF COMPOSITE MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Modulus, High-Conductivity Nanostructured Polymer Electrolyte Membranes via Polymerization-Induced Phase Separation

Morgan W. Schulze et al.

NANO LETTERS (2014)

添加到收藏夹

Article Chemistry, Physical

Cellulose nanofibril reinforced composite electrolytes for lithium ion battery applications

M. Willgert et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

添加到收藏夹

Proceedings Paper Electrochemistry

Packaging - Materials Review

Matthias Herrmann

REVIEW ON ELECTROCHEMICAL STORAGE MATERIALS AND TECHNOLOGY (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multifunctional Structural Supercapacitor Composites Based on Carbon Aerogel Modified High Performance Carbon Fiber Fabric

Hui Qian et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

添加到收藏夹

Review Chemistry, Multidisciplinary

25th Anniversary Article: Understanding the Lithiation of Silicon and Other Alloying Anodes for Lithium-Ion Batteries

Matthew T. McDowell et al.

ADVANCED MATERIALS (2013)

添加到收藏夹

Article Chemistry, Physical

Expansion of carbon fibres induced by lithium intercalation for structural electrode applications

Eric Jacques et al.

CARBON (2013)

添加到收藏夹

Article Engineering, Manufacturing

Structural composite supercapacitors

Natasha Shirshova et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

添加到收藏夹

Article Materials Science, Composites

Solid polymer electrolyte-coated carbon fibres for structural and novel micro batteries

S. Leijonmarck et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Electrochemistry

High polar polyacrylonitrile as a potential binder for negative electrodes in lithium ion batteries

Liyuan Gong et al.

ELECTROCHEMISTRY COMMUNICATIONS (2013)

添加到收藏夹

Article Materials Science, Composites

Multifunctional structure-battery composites for marine systems

J. P. Thomas et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Chemistry, Physical

New structural lithium battery electrolytes using thiol-ene chemistry

Markus Willgert et al.

SOLID STATE IONICS (2013)

添加到收藏夹

Article Materials Science, Composites

Impact of electrochemical cycling on the tensile properties of carbon fibres for structural lithium-ion composite batteries

Eric Jacques et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Chemistry, Physical

Effect of microcracking on ionic conductivity in LATP

Spencer D. Jackman et al.

JOURNAL OF POWER SOURCES (2012)

添加到收藏夹

Article Chemistry, Physical

Calendering effects on the physical and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 cathode

Honghe Zheng et al.

JOURNAL OF POWER SOURCES (2012)

添加到收藏夹

Article Chemistry, Physical

Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity

Elham Sahraei et al.

JOURNAL OF POWER SOURCES (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

History, Evolution, and Future Status of Energy Storage

M. Stanley Whittingham

PROCEEDINGS OF THE IEEE (2012)

添加到收藏夹

Article Electrochemistry

LiMn0.97Al0.03O2 Based Carbon Fiber Electrode Possessing High Rate Capabilities for Li-Ion Batteries

J. Yao et al.

ECS ELECTROCHEMISTRY LETTERS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dispersions of Aramid Nanofibers: A New Nanoscale Building Block

Ming Yang et al.

ACS NANO (2011)

添加到收藏夹

Review Chemistry, Multidisciplinary

Development and challenges of LiFePO4 cathode material for lithium-ion batteries

Li-Xia Yuan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

添加到收藏夹

Article Polymer Science

Photoinduced free radical polymerization of thermoset lithium battery electrolytes

Markus Wingert et al.

EUROPEAN POLYMER JOURNAL (2011)

添加到收藏夹

Article Materials Science, Composites

Design and performance of multifunctional structural composite capacitors

D. J. O'Brien et al.

JOURNAL OF COMPOSITE MATERIALS (2011)

添加到收藏夹

Article Electrochemistry

PAN-Based Carbon Fiber Negative Electrodes for Structural Lithium-Ion Batteries

Maria H. Kjell et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

添加到收藏夹

Article Multidisciplinary Sciences

A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries

Igor Kovalenko et al.

SCIENCE (2011)

添加到收藏夹

Article Engineering, Aerospace

Structural performance of a multifunctional spacecraft structure based on plastic lithium-ion batteries

Samuel C. Roberts et al.

ACTA ASTRONAUTICA (2010)

添加到收藏夹

Article Instruments & Instrumentation

Multifunctional self-charging structures using piezoceramics and thin-film batteries

S. R. Anton et al.

SMART MATERIALS AND STRUCTURES (2010)

添加到收藏夹

Article Polymer Science

Improving multifunctional behavior in structural electrolytes through copolymerization of structure- and conductivity-promoting monomers

James F. Snyder et al.

POLYMER (2009)

添加到收藏夹

Article Materials Science, Composites

Embedding thin-film lithium energy cells in structural composites

T. Pereira et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Chemistry, Physical

Electrochemical and mechanical behavior in mechanically robust solid polymer electrolytes for use in multifunctional structural batteries

James F. Snyder et al.

CHEMISTRY OF MATERIALS (2007)

添加到收藏夹

Article Engineering, Electrical & Electronic

The performance of thin-film Li-ion batteries under flexural deflection

T. Pereira et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

The design and application of multifunctional structure-battery materials systems

JP Thomas et al.

JOM (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical design and performance of composite multifunctional materials

JP Thomas et al.

ACTA MATERIALIA (2004)

添加到收藏夹

Article Polymer Science

Physical aging of polycarbonate: Elastic modulus, hardness, creep, endothermic peak, molecular weight distribution, and infrared data

VA Soloukhin et al.

MACROMOLECULES (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-objective optimization in material design and selection

MF Ashby

ACTA MATERIALIA (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.