4.8 Article

Status and strategies for fabricating flexible oxide ceramic micro-nanofiber materials

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Fabrication of Flexible Mesoporous Black Nb2O5 Nanofiber Films for Visible-Light-Driven Photocatalytic CO2 Reduction into CH4

Xi Lin et al.

Summary: This study reports a facile nanofiber synthesis method for fabricating flexible mesoporous black Nb2O5 nanofiber catalysts, which exhibit high selectivity and conversion efficiency in visible-light-driven photocatalytic CO2 reduction into CH4. The catalysts contain abundant oxygen-vacancies and unsaturated Nb dual-sites, which enhance light absorption and CO2 adsorption, leading to the spontaneous conversion of CO* into *CHO. These catalysts achieve a selectivity of 64.8% for CH4 production with a high evolution rate under visible-light, without the use of sacrificial agents and photosensitizers. The flexible catalyst films also demonstrate promising applications in devices.

ADVANCED MATERIALS (2022)

Article Polymer Science

Minimizing the negative charge of Alginate facilitates the delivery of negatively charged molecules inside cells

Nishant Tyagi et al.

Summary: This study investigates the use of amine grafted Alginate (Alginate+) as a transfection agent for negatively charged molecules. The results show that Alginate+ particles can successfully transfect mammalian cells carrying negatively charged molecules, and in vivo studies demonstrate significant expression of transfected plasmid in various organs of mice. In addition, in-silico studies predict the mode of cell entry and toxicity, while biodegradation of Alginate+ is evaluated in human serum. Overall, this study provides a simple method to fabricate an effective delivery carrier with added properties such as degradability and reduced toxicity.

JOURNAL OF POLYMER RESEARCH (2022)

Article Materials Science, Ceramics

Synthesis of ultra-fine rare-earth-zirconate high-entropy ceramic fibers via electrospinning

Mingyue Wei et al.

Summary: This work used sol-gel and electrospinning techniques to prepare ultra-fine rare-earth-zirconate high-entropy ceramic (HEC) fibers, and characterized their microscopic morphology and decomposition process. The results showed that HEC fibers had excellent thermal insulation properties and maintained a continuous microstructure.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Article Materials Science, Multidisciplinary

Correlation of the heat treatment feature and magnetic properties of the SrFe12O19@ZnFe2O4 core-shell nanofibers

Jianfeng Dai et al.

Summary: Nanocomposite SrFe12O19@ZnFe2O4 with core-shell structure was synthesized via coaxial electrospinning and heat treatment in air. The magnetic properties of the composites showed the best performance at 900 degrees Celsius, indicating effective exchange coupling.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Chemistry, Multidisciplinary

Synthesizing Superior Flexible Oxide Perovskite Ceramic Nanofibers by Precisely Controlling Crystal Nucleation and Growth

Xiaohan Li et al.

Summary: The authors propose a scalable approach of sol-gel electrospinning to synthesize flexible perovskite Li0.35La0.55TiO3 (LLTO) nanofibers (NFs) by reducing grain sizes and pore defects in the NFs. The strategy involves controlling crystal nucleation and growth, as well as constructing soft grain boundaries by controlling calcination temperatures.
Article Materials Science, Multidisciplinary

Bio-templated fabrication of chain-spherical V2O5/C composites from dandelion fiber for high-efficiency electromagnetic wave absorption

Jiaqi Yu et al.

Summary: Chain-spherical V2O5/C composites prepared using dandelion fibers as bio-templates exhibit improved electromagnetic wave absorption performance, with potential for high-performance EMW absorbers. The enhancement in absorption performance is attributed to increased multiple reflections and scattering, enhanced losses, and impedance matching characteristics.

VACUUM (2022)

Article Nanoscience & Nanotechnology

Formation/Decomposition of Li2O2 Induced by Porous NiCeOx Nanorod Catalysts in Aprotic Lithium-Oxygen Batteries

Yihao Liu et al.

Summary: A novel bifunctional cathode catalyst NiCeOx was proposed for high-performance lithium-oxygen batteries (LOBs). The combined action of NiO and CeO2 components was found to facilitate the decomposition of byproducts, increase the oxygen vacancy content in CeO2, and enhance the adsorption of oxygen and superoxide. The hollow and porous nanorod structure of NiCeOx provided abundant catalytic active sites and facilitated reactant transport and discharge product deposition, resulting in high specific discharge capacity and long lifespan.

ACS APPLIED MATERIALS & INTERFACES (2022)

Review Materials Science, Ceramics

One-dimensional electrospun ceramic nanomaterials and their sensing applications

Yuting Wang et al.

Summary: One-dimensional sensing materials prepared via electrospinning exhibit intrinsic properties and great potential for applications in electronic sensing devices. By reviewing different structural and functional characteristics of ceramic materials and discussing their applications and future development directions, the performance of these materials can be enhanced.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Article Multidisciplinary Sciences

Direct synthesis of highly stretchable ceramic nanofibrous aerogels via 3D reaction electrospinning

Xiaota Cheng et al.

Summary: In this study, ceramic nanofibrous aerogels with interwoven crimped nanofibers were designed and synthesized, showing superior mechanical performances and high thermal stability for potential applications in extreme environments.

NATURE COMMUNICATIONS (2022)

Editorial Material Materials Science, Ceramics

Oxysulfide glass electrolytes show promise for making all-solid-state sodium batteries a reality

[Anonymous]

AMERICAN CERAMIC SOCIETY BULLETIN (2022)

Article Multidisciplinary Sciences

Novel preparation of functional β-SiC fiber based In2O3 nanocomposite and controlling of influence factors for the chemical gas sensing

Zambaga Otgonbayar et al.

Summary: The combination of functional beta-SiC fibers with metal-oxide can enhance the sensitivity and gas sensing ability of the sensor material. By adjusting factors such as the amount of metal-oxide, current collectors, and gas species, the performance of the sensor material can be further improved.

SCIENTIFIC REPORTS (2022)

Article Polymer Science

Preparation of the Flexible Green Body of YAG Ceramic Fiber by Melt Spinning

Hongmei Liu et al.

Summary: In this work, flexible YAG ceramic fiber was prepared by melt spinning, and the melting characteristics of different hardness TPU were investigated. The optimized process parameters were obtained and the ceramic fiber with the best microstructure quality was achieved. These findings are crucial for advancing YAG ceramic fiber applications.

POLYMERS (2022)

Article Multidisciplinary Sciences

High-throughput production of kilogram-scale nanofibers by Karman vortex solution blow spinning

Ziwei Li et al.

Summary: The interaction between gas flow and liquid flow is important in both fundamental science and practical applications. A needleless Karman vortex solution blow spinning system has been developed that can produce high-quality nanofibers with large throughput. The system can be scaled up for mass production without compromising quality.

SCIENCE ADVANCES (2022)

Review Chemistry, Multidisciplinary

The Rising of Flexible and Elastic Ceramic Fiber Materials: Fundamental Concept, Design Principle, and Toughening Mechanism

Fan Wu et al.

Summary: This article gives a comprehensive review of emerging flexible and elastic ceramic fiber materials, analyzing the relationship between their microstructures and mechanical behaviors, and emphasizing the toughening mechanism. The research presented in this article is of great significance for the advancement of ceramic fiber materials.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Multidisciplinary Sciences

An electrochemically stable homogeneous glassy electrolyte formed at room temperature for all-solid-state sodium batteries

Xiaowei Chi et al.

Summary: This study reports a new type of solid electrolyte material for the fabrication of all-solid-state sodium batteries. The electrolyte material exhibits excellent electrochemical stability and mechanical properties, enabling high-performance sodium-sulfur batteries. This research provides new design strategies for the development of safe, low-cost, energy-dense, and long-lifetime all-solid-state sodium batteries.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Analytical

Mesoporous NiO@ZnO nanofiber membranes via single-nozzle electrospinning for urine metabolism analysis of smokers

Huaqing Lin et al.

Summary: In this study, a mesoporous NiO@ZnO nanofiber membrane was successfully synthesized using a simple and efficient electrospinning strategy. The membrane served as an effective matrix in LDI-MS, enhancing the intensity of small molecule mass spectra. By applying this matrix, the urine metabolism of smokers was analyzed, revealing differences in metabolic profiles and potential markers.

ANALYST (2022)

Article Chemistry, Multidisciplinary

Distinct cellulose nanofibrils generated for improved Pickering emulsions and lignocellulose-degradation enzyme secretion coupled with high bioethanol production in natural rice mutants

Hao Peng et al.

Summary: This study utilized a rice mutant with reduced recalcitrance to enzymatically hydrolyze rice straw for increased bioethanol production. Optimal cellulose nanofibrils (CNFs) were generated from enzymatic residues and showed superior performance as both inducers for cellulase secretion and stabilizers for Pickering emulsions. This study provides a novel green-like technology for complete biomass utilization towards low-cost bioethanol and high-value bioproducts.

GREEN CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Dynamic Regulation of Lithium Dendrite Growth with Electromechanical Coupling Effect of Soft BaTiO3 Ceramic Nanofiber Films

Shuhui Xia et al.

Summary: A soft BaTiO3 ceramic nanofiber film with excellent ferroelectricity and piezoelectricity is reported for regulating the deposition of Li metal, addressing the issue of dendrite growth in lithium metal batteries. Experimental results demonstrate that Li-Cu cells using this film exhibit high Coulombic efficiency over 200 cycles, while LMBs paired with high-voltage cathodes maintain 80% capacity in 300 cycles.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Direct Magnetic Reinforcement of Electrocatalytic ORR/OER with Electromagnetic Induction of Magnetic Catalysts

Jianhua Yan et al.

Summary: The carbon-based magnetic catalytic nanocages can enhance oxygen catalytic activity under an external magnetic field, improving catalytic efficiency significantly. Compared to commercial catalysts, the magnetic catalyzed Zn-air batteries show higher capacities and longer durability, pointing towards a promising strategy of utilizing electromagnetic induction to boost oxygen catalysis.

ADVANCED MATERIALS (2021)

Article Materials Science, Ceramics

Synergistic effects of Si3N4 and CNT on densification and properties of TiC ceramics

Van-Huy Nguyen et al.

Summary: The addition of Si3N4 and carbon nanotubes (CNTs) to TiC improves its thermal conductivity, flexural strength, and hardness. Both additives individually had negative effects on TiC density, but together they resulted in a near fully dense composite. The combination of Si3N4 and CNTs led to smaller grain size, denser microstructure, and increased thermal conductivity, hardness, and flexural strength in the ceramic.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Multidisciplinary

Highly ordered Nb2O5 nanochannel film with rich oxygen vacancies for electrocatalytic N2 reduction: Inactivation and regeneration of electrode

Jialu Wang et al.

Summary: In this study, highly ordered Nb2O5 nanochannel film was fabricated onto niobium foil using an anodization method, exhibiting good electrochemical N-2 reduction reaction activity. The Nb2O5-NCF showed electrochromism during NRR and could be readily regenerated by low-temperature thermal treatment or applying an anodic potential, showing superior recycling reproducibility.

CHINESE CHEMICAL LETTERS (2021)

Article Materials Science, Ceramics

A novel (La0.2Sm0.2Eu0.2Gd0.2Tm0.2)2Zr2O7 high-entropy ceramic nanofiber with excellent thermal stability

Weijun Zhao et al.

Summary: In this study, (La0.2Sm0.2Eu0.2Gd0.2Tm0.2)(2)Zr2O7 high-entropy ceramic nanofibers were prepared for the first time using the electrospinning method. The fibers showed a pure phase with a uniform distribution of rare-earth elements and retained a dense structure up to 1000 degrees C for 0-5 hours. The thermal conductivity of these fibers was approximately 0.23 W m(-1) K-1, making them promising materials for high-temperature heat insulation applications due to their slow fiber diameter growth and excellent thermal stability.

CERAMICS INTERNATIONAL (2021)

Article Biophysics

Construction of a multifunctional 3D nanofiber aerogel loaded with ZnO for wound healing

Zhenyang Mao et al.

Summary: This study developed a multifunctional PLA/gelatin/ZnO nanofiber aerogel for wound healing, which has antibacterial properties and biocompatibility, promoting healing and enhancing angiogenesis.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

Article Engineering, Multidisciplinary

Rational design of hierarchically sulfide and MXene-reinforced porous carbon nanofibers as advanced electrode for high energy density flexible supercapacitors

Sheng-xue Yan et al.

Summary: The study utilized in-situ carbon coating technology to embed sulfide-loaded MXene in carbon nanofibers, improving sulfide conductivity and ion transfer rate. The resulting hybrid membrane offers a solution to the problems of poor sulfide conductivity and cyclic stability through its unique structure and characteristics.

COMPOSITES PART B-ENGINEERING (2021)

Article Materials Science, Ceramics

One step from nanofiber to functional hybrid structure: Pd doped ZnO/SnO2 heterojunction nanofibers with hexagonal ZnO columns for enhanced low-temperature hydrogen gas sensing

Kelin Hu et al.

Summary: A novel hybrid structure of Pd doped ZnO/SnO2 heterojunction nanofibers with hexagonal ZnO columns was successfully synthesized in a single step from electrospun precursor nanofibers. The structure exhibited excellent hydrogen gas sensing properties at low temperature, with high response to H2 gas, rapid response/recovery times, good selectivity, and excellent linearity. Characterization of the materials was done using XRD, FESEM, HRTEM, XPS, and synthesis mechanism and gas sensing mechanism were proposed.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

One-step synthesis of unique thorn-like BaTiO3-TiO2 composite nanofibers to enhance piezo-photocatalysis performance

Zhaowei Liu et al.

Summary: In this study, thorn-like BaTiO3-TiO2 composite nanofibers were successfully prepared, exhibiting excellent photocatalytic performance and recyclability, sensitive to water flow and capable of effectively utilizing tiny water vibration energy. The scavenger study indicated that superoxide radicals and hydroxyl radicals were the main factors to improve the photodegradation activity.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Continuous hydrothermal synthesis in supercritical conditions as a novel process for the elaboration of Y-doped BaZrO3

Melanie Francois et al.

Summary: The study presents a novel process for synthesizing a ceramic material that serves as an electrolyte for Protonic Ceramic Fuel cell. By utilizing supercritical water, particles with uniform size distribution can be obtained, with a thermal treatment ultimately homogenizing the compound's structure.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Fabrication of ZnO-In2S3 composite nanofiber as highly efficient hydrogen evolution photocatalyst

Yu-Cheng Chang et al.

Summary: The zinc oxide-indium sulfide composite nanofiber is fabricated through electrospinning process, serving as a promising candidate for highly efficient hydrogen evolution photocatalyst by enhancing photocatalytic hydrogen production activity and increasing electron-hole pairs separation.

MATERIALS LETTERS (2021)

Review Materials Science, Multidisciplinary

High-entropy ceramics: Review of principles, production and applications

Saeid Akrami et al.

Summary: High-entropy ceramics, containing five or more cations, have attracted significant attention recently for their superior properties in various structural and functional applications. Efforts have been made to increase entropy, minimize Gibbs free energy and achieve stable single-phase high-entropy ceramics. These materials have potential for future applications in fields such as oxides, nitrides, carbides, borides, and hydrides.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)

Article Chemistry, Multidisciplinary

An Efficient Strategy for Reinforcing Flexible Ceramic Membranes

Xue Mao et al.

Summary: A facile method is presented for the large-scale fabrication of highly flexible, mechanically stable, and temperature-resistant ceramic lightweight membranes. These membranes exhibit excellent thermal superinsulation and mechanical strength, making them ideal for the manufacturing of next-generation firefighter uniforms.

NANO LETTERS (2021)

Article Materials Science, Multidisciplinary

Fabrication of one-dimensional Bi2WO6/CuBi2O4 heterojunction nanofiber and its photocatalytic degradation property

Pingping Teng et al.

Summary: In this study, a one-dimensional nanostructured copper bismuthate-bismuth tungstate photocatalyst was prepared using electrospinning and solvothermal methods. The catalyst showed good photocatalytic performance and recyclability, indicating its potential for practical applications in environmental remediation.

OPTICAL MATERIALS (2021)

Article Chemistry, Applied

TiO2 and TiO2/Ag nanofibers: template synthesis, structure, and photocatalytic properties

Alexander Yu. Vakhrushev et al.

Summary: The study presents a method for synthesizing TiO2 and TiO2/Ag fibers with anatase-rutile-silver heterojunction, using alcohol solutions of titanium(IV) tetrabutoxide and silver nitrate on a cellulose template, followed by annealing. The microstructure and photocatalytic activities of the fibers were analyzed, showing that mixed-phase samples (40% rutile and 60% anatase) exhibited the highest catalytic activity.

JOURNAL OF POROUS MATERIALS (2021)

Article Materials Science, Ceramics

Robust ceramic nanofibrous membranes with ultra-high water flux and nanoparticle rejection for self-standing ultrafiltration

Juan Jiang et al.

Summary: A ceramic electrospun nanofibrous membrane with ultra-strong tensile strength was successfully fabricated by using graphene oxide as an additive. The optimized membrane showed high permeation flux and rejection efficiencies under both neutral and acidic water conditions, demonstrating great potential for harsh-environment ultrafiltration applications.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Multidisciplinary Sciences

Flexible ceramic nanofibrous sponges with hierarchically entangled graphene networks enable noise absorption

Dingding Zong et al.

Summary: The study introduces a flexible ceramic nanofibrous sponge material for noise absorption at high temperatures, which features hierarchically entangled graphene networks and a lighter weight. Compared to traditional materials, this material offers a wider noise absorption frequency range and better temperature stability.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

In Situ Synthesis of Mechanically Robust, Transparent Nanofiber-Reinforced Hydrogels for Highly Sensitive Multiple Sensing

Xuyan Lu et al.

Summary: This study introduces an in situ synthesis strategy for developing bioinspired chemically integrated silica-nanofiber-reinforced hydrogels (SFRHs) with robust mechanical and electronic performance. The resultant SFRHs demonstrate excellent mechanical properties, high transmittance, enhanced ionic conductivity, and sensitivity to multiple stimuli, making them suitable for various applications.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Altering Hydrogenation Pathways in Photocatalytic Nitrogen Fixation by Tuning Local Electronic Structure of Oxygen Vacancy with Dopant

Yanan Bo et al.

Summary: This study introduces Fe dopants into TiO2 nanofibers to stabilize oxygen vacancies and tune their local electronic structure, shifting the hydrogenation of N-2 from an associative alternating pathway to an associative distal pathway. This approach provides new insights for efficiently controlling reaction pathways towards photocatalytic nitrogen fixation.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Review Materials Science, Multidisciplinary

Electrospun nanofiber-based soft electronics

Yan Wang et al.

Summary: Electrospun nanofibers have advantages in flexibility, transparency, and conductivity in the field of soft electronics. The structure, properties, and assembly strategies for flexible/stretchable electronic devices utilizing electrospun nanofibers are highlighted. Recent progress includes the design and fabrication of various electronic devices such as conductors, sensors, transistors, and energy harvesting and storage components.

NPG ASIA MATERIALS (2021)

Article Chemistry, Physical

Flexible Self-Charging, Ultrafast, High-Power-Density Ceramic Capacitor System

Mahesh Peddigari et al.

Summary: The flexible self-charging, ultrafast, and high-power-density (SUHP) capacitor system demonstrated in this study integrates an aerosol-deposited nanograined relaxor ferroelectric Pb(Mg1/3Nb2/3)O-3-PbTiO3 (PMN-PT) capacitor and piezoelectric Pb(Zr-x,Ti1-x)O-3 (PZT) harvester, generating electric energy under biomechanical bending force and storing it for discharge with high energy density and power density, showcasing a promising approach for powering future flexible pulsed-power electronic devices.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

A General Strategy to Fabricate Flexible Oxide Ceramic Nanofibers with Gradient Bending-Resilience Properties

Xiao Wang et al.

Summary: Inorganic materials assembled with rigid elements like crystals or graphitized carbon typically exhibit brittleness and hardness. However, TiO2 ceramic crystal nanofibers and carbon nanofibers demonstrate superior flexibility, with carbon fibers possessing bending resilience and TiO2 fibers being surprisingly knottable. By combining these two constituents, composite nanofibers with varying flexure mechanisms are fabricated, revealing how the addition of carbon enhances resilience while increasing TiO2 content softens the composite nanofibers. This study provides insight into the mechanical properties of inorganic materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Hierarchically Interconnected Piezoceramic Textile with a Balanced Performance in Piezoelectricity, Flexibility, Toughness, and Air Permeability

Ying Hong et al.

Summary: A flexible, air-permeable, and high-performance piezoceramic textile composite with a mechanically reinforced hierarchical porous structure was introduced, exhibiting excellent electrical output and mechanical properties. The multi-order hierarchical ceramic textile design strategy developed in this study promotes the practicality of smart/functional materials in wearables and flexible electronics. The fabricated samples showed significantly improved performance compared to previously reported works, with open-circuit voltage of 128 V, short-circuit current of 120 mu A, and instantaneous power density of 0.75 mW cm(-2).

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Sodium-Decorated Amorphous/Crystalline RuO2 with Rich Oxygen Vacancies: A Robust pH-Universal Oxygen Evolution Electrocatalyst

Lijie Zhang et al.

Summary: The study developed sodium-decorated amorphous/crystalline RuO2 with rich oxygen vacancies as a pH-universal OER electrocatalyst, showing remarkable acid resistance and high catalytic stability. The introduction of Na dopant and oxygen vacancy in RuO2 was found to lower the energy barrier for OER by weakening the adsorption strength of the OER intermediates.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Mathematics, Applied

Electric potential and energy band in ZnO nanofiber tuned by local mechanical loading

Shuaiqi Fan et al.

Summary: This study established a coupled piezoelectric/semiconducting model and found that local mechanical loading and length have significant tuning effects on the energy band structure of ZnO nanofibers, affecting their electric potential and energy bands.

APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2021)

Article Energy & Fuels

Template and sol-gel routed CoMn2O4 nanofibers for supercapacitor applications

Jai Bhagwan et al.

Summary: Nanofibrous CoMn2O4 materials were prepared using a simple sol-gel process, showing excellent supercapacitive performance. The high energy storage capabilities of the CoMn2O4 nanofibers were utilized to assemble an aqueous asymmetric supercapacitor, demonstrating good power and energy density performance, and capable of powering multiple devices.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Chemistry, Physical

Role of TiCN addition on the characteristics of reactive spark plasma sintered ZrB2-based novel composites

Abbas Sabahi Namini et al.

Summary: The study investigated the effect of TiCN on the microstructure development of fully dense ZrB2-based ceramics sintered using spark plasma sintering. The formation of (Zr,Ti)B-2 and ZrCN phases was observed in the final microstructures, indicating a chemical reaction between TiCN and ZrB2. The (Zr,Ti)B-2 matrix in the ternary system exhibited a Vickers hardness of 29.3 GPa and an elastic modulus of 450.8 GPa, with a roughly uniform composition facilitated by SiC.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Multidisciplinary

Flexible, Mechanically Robust, Solid-State Electrolyte Membrane with Conducting Oxide-Enhanced 3D Nanofiber Networks for Lithium Batteries

Mengmeng Zhang et al.

Summary: The study introduced a novel 3D ion-conducting network by utilizing LLZO nanoparticles reinforced conducting polymer nanofibers, creating a lightweight continuous and interconnected LLZO-enhanced 3D network that outperforms traditional heavy and brittle ceramic nanofibers.

NANO LETTERS (2021)

Article Multidisciplinary Sciences

Photocatalytic solar hydrogen production from water on a 100-m2 scale

Hiroshi Nishiyama et al.

Summary: Hydrogen, as an energy carrier, can be obtained through photocatalysis and electrolysis, making it a carbon-neutral energy source. While photocatalytic water splitting efficiency is low, large-scale safe production and collection of hydrogen is feasible. The essential next steps for economic viability and practical use are reactor and process optimization to reduce costs and improve efficiency and stability.

NATURE (2021)

Article Chemistry, Multidisciplinary

Stretchable and Compressible Si3N4 Nanofiber Sponge with Aligned Microstructure for Highly Efficient Particulate Matter Filtration under High-Velocity Airflow

Mingzhu Li et al.

Summary: The study presents a highly porous Si3N4 nanofiber sponge for efficient PM2.5 filtration with low pressure drop, high mechanical robustness, and thermal stability, offering new perspectives for the design and preparation of high-performance filtration materials.
Article Multidisciplinary Sciences

Encapsulate α-MnO2 nanofiber within graphene layer to tune surface electronic structure for efficient ozone decomposition

Guoxiang Zhu et al.

Summary: This study has developed a hierarchical MnO2@graphene catalyst for ozone decomposition, which encapsulates defective alpha -MnO2 nanofiber within ultrathin graphene shells. The catalyst shows high activity and stability under humid conditions.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Electrospun Nanofiber-Based Viroblock/ZnO/PAN Hybrid Antiviral Nanocomposite for Personal Protective Applications

Abdul Salam et al.

Summary: Developed electrospun nanofiber-based Viroblock-loaded PAN/ZnO hybrid nanocomposite showed high antibacterial and antiviral activities, with a significant reduction in virus titer observed with 5% VB loading. These nanofibers have great potential in the development of PPE for protection against enveloped viruses like influenzas and coronaviruses.

NANOMATERIALS (2021)

Article Materials Science, Ceramics

YAG/Al2O3/ZrO2 composite fibers of core-shell structure prepared by electrospinning

Ling He et al.

Summary: In this study, YAG/Al2O3/ZrO2 composite fibers were successfully prepared by electrospinning method, and the effects of spinning process parameters on fiber structure and morphology were investigated. The results showed that the composite fibers had a smooth surface, single crystal core-shell structure, and were obtained under specific process conditions.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

Article Chemistry, Physical

Boosting the electrochemical properties of CoCo2O4 porous nanowire arrays by microwave-assisted synthesis for battery-supercapacitor hybrid devices

Yin Sun et al.

Summary: The study successfully synthesized cobalt oxide porous nanowires using a microwave-assisted hydrothermal process, which showed superior electrochemical performance compared to materials synthesized by a conventional hydrothermal process. This improvement can be attributed to factors such as the purification effect and lattice expansion introduced by microwave assistance.

SUSTAINABLE ENERGY & FUELS (2021)

Article Chemistry, Physical

Carbon nanofiber supported Ni-ZnO catalyst for efficient and selective hydrogenation of pyrolysis gasoline

Jie Wu et al.

Summary: In this study, a series of Ni-ZnO/C catalysts were successfully synthesized and found to exhibit better performance in the hydrogenation of PyGas compared to commercial Ni/Al2O3 catalyst.

CATALYSIS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

Selective nucleation and targeted deposition effect of lithium in a lithium-metal host anode

Yun Zhao et al.

Summary: Uncontrollable nucleation and growth of lithium on Li-anode surfaces is a major cause of rapid failure in Li-metal batteries. This study shows selective nucleation and targeted deposition of lithium in specially designed macropores, demonstrating the impact of pore size and local lithiophilicity on the process. Using fluoride-rich carbon fibers as stable lithium-ion flow rails can lead to enhanced stability and coulombic efficiency in lithium batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Inorganic-Organic Nanocomposites Based on Aggregation-Induced Emission Luminogens

Yuanwei Wang et al.

Summary: The emergence of aggregation-induced emission (AIE) has greatly promoted the development of various fields including chemical sensing, bioimaging, theranostics, and photoelectric devices. Integrating AIE luminogens with functionalized supporting agents is an intriguing strategy for constructing high-performance versatile materials. Inorganic nanomaterials have attracted scientific interest in functionalizing AIE luminogens by combining their advantages.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

Hydrogen-Mediated CVD Epitaxy of Graphene on SiC: Implications for Microelectronic Applications

Zouhour Ben Jabra et al.

Summary: This study reveals a generic mechanism for growing graphene on 6H-SiC(0001) and controls the proportions of two different types of graphene domains by tuning the H-2 flow rate. The H-assisted CVD growth of graphene developed here is a unique method to grow fully free-standing H-Gr, which is crucial for future applications in nano- and microelectronics. These results provide a foundation for using graphene as a template layer for van der Waals homo- and heteroepitaxy for optoelectronic applications.

ACS APPLIED NANO MATERIALS (2021)

Article Materials Science, Ceramics

Ternary ZnO/ZnAl2O4/Al2O3 composite nanofiber as photocatalyst for conversion of CO2 and CH4

Pouran Moradipour et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Multidisciplinary

Rational design of hierarchical C-MgO@ZnO nanofiber as sulfur host for high-performance lithium-sulfur batteries

Danyang Ma et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Article Materials Science, Multidisciplinary

Toward a Highly Functional Hybrid ZnO Nanofiber-rGO Gas Sensor

Talieh Salehi et al.

ADVANCED ENGINEERING MATERIALS (2020)

Article Chemistry, Physical

Stabilization by Configurational Entropy of the Cu(II) Active Site during CO Oxidation on Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O

Martina Fracchia et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Article Nanoscience & Nanotechnology

Polymer Template Synthesis of Flexible SiO2 Nanofibers to Upgrade Composite Electrolytes

Shujie Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Ceramics

Influence of SiAlON addition on the microstructure development of hot-pressed ZrB2-SiC composites

Thang Phan Nguyen et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Ceramics

Electron microscopy investigation of spark plasma sintered ZrO2 added ZrB2-SiC composite

Thang Phan Nguyen et al.

CERAMICS INTERNATIONAL (2020)

Review Biochemistry & Molecular Biology

Recent Advances in Electrospun Sustainable Composites for Biomedical, Environmental, Energy, and Packaging Applications

Hao Liu et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)

Article Engineering, Environmental

Preparation and Characterization of Electrospun Polyurethane Nanofibrous Microfiltration Membrane

Mohsen Moslehi et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

Article Chemistry, Analytical

Photolithographically Constructed Single ZnO Nanowire Device and Its Ultraviolet Photoresponse

Quanli Liu et al.

ANALYTICAL SCIENCES (2020)

Article Materials Science, Ceramics

Flexible and robust YAG-Al2O3 composite nanofibrous membranes enabled by a hybrid nanocrystalline-amorphous structure

Juan Jiang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Materials Science, Multidisciplinary

Microwave response of coplanar waveguide based on electrodeposited CoFe2O4 nanowires

N. Labchir et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

Article Nanoscience & Nanotechnology

ZnO/Cellulose Nanofiber Composites for Sustainable Sunlight-Driven Dye Degradation

Mostafa Dehghani et al.

ACS APPLIED NANO MATERIALS (2020)

Article Materials Science, Multidisciplinary

Photo-Rechargeable Fabrics as Sustainable and Robust Power Sources for Wearable Bioelectronics

Nannan Zhang et al.

MATTER (2020)

Article Chemistry, Multidisciplinary

Hollow Au@TiO2 porous electrospun nanofibers for catalytic applications

Labeesh Kumar et al.

RSC ADVANCES (2020)

Article Materials Science, Ceramics

The influence of air annealing on the microstructure and scintillation properties of Ce,Mg:LuAG ceramics

Xiaopu Chen et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Review Chemistry, Multidisciplinary

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Jiajia Xue et al.

CHEMICAL REVIEWS (2019)

Article Electrochemistry

High entropy oxides as anode material for Li-ion battery applications: A practical approach

Qingsong Wang et al.

ELECTROCHEMISTRY COMMUNICATIONS (2019)

Article Engineering, Environmental

In-situ prepared ZnO-ZnFe2O4 with 1-D nanofiber network structure: An effective adsorbent for toxic dye effluent treatment

Richard Appiah-Ntiamoah et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Article Materials Science, Multidisciplinary

Grain and grain boundary conduction mechanism in sol-gel synthesized and microwave heated Pb0.8-yLayCo0.2TiO3 (y=0.2-0.8) nanofibers

N. Suresh Kumar et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Article Materials Science, Multidisciplinary

Unique electromagnetic loss properties of Co-doped ZnO Nanofiber

Xiaogu Huang et al.

MATERIALS LETTERS (2019)

Review Biochemistry & Molecular Biology

Fabrication of Electrospun Polymer Nanofibers with Diverse Morphologies

Chenyu Wang et al.

MOLECULES (2019)

Article Chemistry, Physical

Self-powered flexible electronics beyond thermal limits

Jung Hwan Park et al.

NANO ENERGY (2019)

Article Chemistry, Physical

High-performance formaldehyde adsorption on CuO/ZnO composite nanofiber coated QCM sensors

Sibel Emir Diltemiz et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Multidisciplinary

(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7: A novel high-entropy ceramic with low thermal conductivity and sluggish grain growth rate

Zifan Zhao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Ultra-long ZnO/carbon nanofiber as free-standing electrochemical sensor for dopamine in the presence of uric acid

Chi Yang et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Chemistry, Analytical

Design of supersensitive and selective ZnO-nanofiber-based sensors for H2 gas sensing by electron-beam irradiation

Jae-Hun Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Multidisciplinary

Polymer Template Synthesis of Flexible BaTiO3 Crystal Nanofibers

Jianhua Yan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

MXene-Reinforced Cellulose Nanofibril Inks for 3D-Printed Smart Fibres and Textiles

Wen-Tao Cao et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Editorial Material Multidisciplinary Sciences

A figure of merit for flexibility

Jun Peng et al.

SCIENCE (2019)

Article Nanoscience & Nanotechnology

Preparation and Characterization of CuO/ZnO/PVDF/PAN Nanofiber Composites by Bubble-electrospinning

Fang Wei et al.

RECENT PATENTS ON NANOTECHNOLOGY (2019)

Review Chemistry, Physical

Electrospun Nanofibers Applied to Dye Solar Sensitive Cells: A Review

Jesse Gerardo Lopez-Covarrubias et al.

MATERIALS (2019)

Article Chemistry, Multidisciplinary

Hydrated Layered Vanadium Oxide as a Highly Reversible Cathode for Rechargeable Aqueous Zinc Batteries

Ning Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Materials Science, Ceramics

Effects of sintering atmosphere on the densification and microstructure of yttrium aluminum garnet fibers prepared by sol-gel process

Juan Jiang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Review Materials Science, Composites

Electrospun nanofibrous materials: A versatile platform for enzyme mimicking and their sensing applications

Wei Song et al.

COMPOSITES COMMUNICATIONS (2019)

Article Multidisciplinary Sciences

Polymer Template Synthesis of Soft, Light, and Robust Oxide Ceramic Films

Jianhua Yan et al.

ISCIENCE (2019)

Article Chemistry, Physical

A high-entropy metal oxide as chemical anchor of polysulfide for lithium-sulfur batteries

Yuenan Zheng et al.

ENERGY STORAGE MATERIALS (2019)

Article Nanoscience & Nanotechnology

ZnO Nanofiber Thin-Film Transistors with Low-Operating Voltages

Fengyun Wang et al.

ADVANCED ELECTRONIC MATERIALS (2018)

Review Chemistry, Multidisciplinary

One-Dimensional Hetero-Nanostructures for Rechargeable Batteries

Liqiang Mai et al.

ACCOUNTS OF CHEMICAL RESEARCH (2018)

Article Nanoscience & Nanotechnology

Nature-Inspired Capillary-Driven Welding Process for Boosting Metal-Oxide Nanofiber Electronics

You Meng et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Mechanochemical-Assisted Synthesis of High-Entropy Metal Nitride via a Soft Urea Strategy

Tian Jin et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

An Amorphous Noble-Metal-Free Electrocatalyst that Enables Nitrogen Fixation under Ambient Conditions

Chade Lv et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Materials Science, Ceramics

Microstructure and elastic properties of BaTiO3 nanofibers sintered in various atmospheres

Yongyong Zhuang et al.

CERAMICS INTERNATIONAL (2018)

Article Engineering, Environmental

Lightweight, flexible SiCN ceramic nanowires applied as effective microwave absorbers in high frequency

Peng Wang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Engineering, Environmental

Hierarchically designed ZIF-8-derived Ni@ZnO/carbon nanofiber freestanding composite for stable Li storage

Bhavana Joshi et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Materials Science, Multidisciplinary

Oxidation behavior of Si3N4 fibers derived from polycarbosilane

Siwei Li et al.

CORROSION SCIENCE (2018)

Article Chemistry, Multidisciplinary

The use of poly-cation oxides to lower the temperature of two-step thermochemical water splitting

Shang Zhai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Engineering, Electrical & Electronic

Photo-decontamination of p-nitrophenol using reusable lanthanum doped ZnO electrospun nanofiber catalyst

Krishnasamy Lakshmi et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Chemistry, Multidisciplinary

Ag-Deposited Electrospun SrTiO3 Nanofiber with Enhanced Photocatalytic Activity for Degradation of Methylene Orange

Chechia Hu et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)

Article Chemistry, Multidisciplinary

Tramadol hydrochloride delivery by regenerated cellulose nanofiber-TiO2-ZnO composites

Gabriel Ademola Olatunji et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2018)

Article Chemistry, Physical

Strong metal-support interaction improves activity and stability of Pt electrocatalysts on doped metal oxides

Ignacio Jimenez-Morales et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

Review Polymer Science

Electrospun nanofiber reinforced composites: a review

Shaohua Jiang et al.

POLYMER CHEMISTRY (2018)

Article Chemistry, Physical

MoO3 nanosheets for efficient electrocatalytic N-2 fixation to NH3

Jingrui Han et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Materials Science, Ceramics

Facile synthesis and characterization of spinel ferrite NiFe2O4 nanowire arrays with a high-aspect-ratio

D. Q. Han et al.

CERAMICS INTERNATIONAL (2018)

Article Chemistry, Multidisciplinary

Flexible poly(vinyl alcohol)-ceramic composite separators for supercapacitor applications

Chris Yeajoon Bon et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)

Article Materials Science, Multidisciplinary

Scintillation properties and effect of thermal annealing in Lu3Al5O12:Ce and Lu3Al5O12:Pr ceramics

Marcin E. Witkowski et al.

OPTICAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

Charge-Induced Disorder Controls the Thermal Conductivity of Entropy-Stabilized Oxides

Jeffrey L. Braun et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Splash-Resistant and Light-Weight Silk-Sheathed Wires for Textile Electronics

Zhe Yin et al.

NANO LETTERS (2018)

Article Multidisciplinary Sciences

Spontaneous formation of nanoparticles on electrospun nanofibres

Norbert Radacsi et al.

NATURE COMMUNICATIONS (2018)

Review Biochemical Research Methods

Porphyrin-Based Dye-Sensitized Solar Cells (DSSCs): a Review

Ozgul Birel et al.

JOURNAL OF FLUORESCENCE (2017)

Article Engineering, Chemical

The mechanical strength of a ceramic porous hollow fiber

Patrick de Wit et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Article Materials Science, Ceramics

Local structure of the MgxNixCoxCuxZnxO(x=0.2) entropy-stabilized oxide: An EXAFS study

Christina M. Rost et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Materials Science, Multidisciplinary

3D printing of highly flexible supercapacitor designed for wearable energy storage

Milad Areir et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)

Review Chemistry, Physical

Energy and fuels from electrochemical interfaces

Vojislav R. Stamenkovic et al.

NATURE MATERIALS (2017)

Article Multidisciplinary Sciences

Flexible supercapacitor electrodes based on real metal-like cellulose papers

Yongmin Ko et al.

NATURE COMMUNICATIONS (2017)

Article Multidisciplinary Sciences

Super-strong materials for temperatures exceeding 2000 °C

Laura Silvestroni et al.

SCIENTIFIC REPORTS (2017)

Article Chemistry, Physical

Corn-cob like nanofibres as cathode catalysts for an effective microstructure design in solid oxide fuel cells

Yukwon Jeon et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Materials Science, Multidisciplinary

3D printing of highly flexible supercapacitor designed for wearable energy storage

Milad Areir et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)

Article Chemistry, Multidisciplinary

A General Small-Scale Reactor To Enable Standardization and Acceleration of Photocatalytic Reactions

Chi Chip Le et al.

ACS CENTRAL SCIENCE (2017)

Article Materials Science, Multidisciplinary

Carbon Coated Alumina Nanofiber Membranes for Selective Ion Transport

Vera S. Solodovnichenko et al.

ADVANCED ENGINEERING MATERIALS (2017)

Article Chemistry, Physical

CO2 capture and photocatalytic reduction using bifunctional TiO2/MOF nanocomposites under UV-vis irradiation

Angus Crake et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Review Chemistry, Multidisciplinary

Electrospun Nanofibers: New Concepts, Materials, and Applications

Jiajia Xue et al.

ACCOUNTS OF CHEMICAL RESEARCH (2017)

Article Nanoscience & Nanotechnology

Hierarchical Porous Structured SiO2/SnO2 Nanofibrous Membrane with Superb Flexibility for Molecular Filtration

Haoru Shan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Materials Science, Ceramics

Domain switchings within BaTiO3 nanofibers under different polarizing voltages and loading forces

Jiaqi Guo et al.

CERAMICS INTERNATIONAL (2017)

Article Chemistry, Multidisciplinary

Brittle-flexible-brittle transition in nanocrystalline zirconia nanofibrous membranes

Xue Mao et al.

CRYSTENGCOMM (2016)

Article Multidisciplinary Sciences

Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries

Kun (Kelvin) Fu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Multidisciplinary Sciences

Development of a novel high-entropy alloy with eminent efficiency of degrading azo dye solutions

Z. Y. Lv et al.

SCIENTIFIC REPORTS (2016)

Article Multidisciplinary Sciences

Entropy-stabilized oxides

Christina M. Rost et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

In situ synthesis of flexible hierarchical TiO2 nanofibrous membranes with enhanced photocatalytic activity

Renzhong Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Multidisciplinary

Fabrication and characterization of poly(ethylene oxide) templated nickel oxide nanofibers for dye degradation

Deepika Malwal et al.

ENVIRONMENTAL SCIENCE-NANO (2015)

Review Chemistry, Physical

Electrospun Polymer Fibers for Electronic Applications

Alessandro Luzio et al.

MATERIALS (2014)

Review Engineering, Chemical

Flexible supercapacitors

Shan Shi et al.

PARTICUOLOGY (2013)

Review Chemistry, Multidisciplinary

One-Dimensional Metal-Oxide Nanostructures: Recent Developments in Synthesis, Characterization, and Applications

Rupesh S. Devan et al.

ADVANCED FUNCTIONAL MATERIALS (2012)

Article Materials Science, Ceramics

α-Alumina Fiber with Platelet Morphology Through Wet Spinning

Saralasrita Mohanty et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)

Article Chemistry, Multidisciplinary

Novel hollow mesoporous 1D TiO2 nanofibers as photovoltaic and photocatalytic materials

Xiang Zhang et al.

NANOSCALE (2012)

Article Chemistry, Physical

Surface-assisted transfer hydrogenation catalysis on a γ-Al2O3-supported Ir dimer

Satoshi Muratsugu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)

Article Chemistry, Multidisciplinary

High-Strain Sensors Based on ZnO Nanowire/Polystyrene Hybridized Flexible Films

Xu Xiao et al.

ADVANCED MATERIALS (2011)

Article Materials Science, Ceramics

Synthesis of ultra-fine α-Al2O3 fibers via electrospinning method

A. Mahapatra et al.

CERAMICS INTERNATIONAL (2011)

Article Polymer Science

One-step Electro-spinning/netting Technique for Controllably Preparing Polyurethane Nano-fiber/net

Juanping Hu et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2011)

Article Polymer Science

A Design of Experiments (DoE) Approach to Material Properties Optimization of Electrospun Nanofibers

Stuart R. Coles et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

Article Chemistry, Physical

Adsorption and oxidation of NH3 over V2O5/AC surface

Dekui Sun et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2009)

Article Materials Science, Multidisciplinary

Electrospinning route for α-Fe2O3 ceramic nanofibers and their gas sensing properties

Wei Zheng et al.

MATERIALS RESEARCH BULLETIN (2009)

Article Materials Science, Ceramics

The sol-gel transition of mullite spinning solution in relation to the formation of ceramic fibers

Xintuo Chen et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2008)

Article Polymer Science

Electrospun polyoxymethylene: Spinning conditions and its consequent nanoporous nanofiber

Thontree Kongkhlang et al.

MACROMOLECULES (2008)

Article Materials Science, Multidisciplinary

A method to fabricate nanorod films on aluminum lattice membrane by magnetron sputtering

Huajun Zheng et al.

THIN SOLID FILMS (2008)

Article Materials Science, Multidisciplinary

Texture Evolution of Sol-Gel-Derived Pb(Zr,Ti)O3 Film on Platinum Bottom Electrode with Different Annealing Process

Yang Fan et al.

RARE METAL MATERIALS AND ENGINEERING (2008)

Article Electrochemistry

Electrospun manganese oxide nanofibers as anodes for lithium-ion batteries

Quan Fan et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2007)

Article Chemistry, Multidisciplinary

Mesoporous TiO2/SiO2 composite nanofibers with selective photocatalytic properties

Sihui Zhan et al.

CHEMICAL COMMUNICATIONS (2007)

Article Materials Science, Multidisciplinary

Template-directed formation of functional complex metal-oxide nanostructures by combination of sol-gel processing and spin coating

Y. C. Choi et al.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2006)

Article Chemistry, Physical

Titanium oxide nanotubes, nanofibers and nanowires

ZY Yuan et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2004)

Article Chemistry, Multidisciplinary

Sol-gel electrophoretic deposition for the growth of oxide nanorods

SJ Limmer et al.

ADVANCED MATERIALS (2003)