☆ 4.7 Article

Microstructures and mechanical properties of Mg-5Li-4Sn-2Al-1Zn alloy after hot extrusion

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Multidisciplinary

Plastic deformation and heat treatment of Mg-Li alloys: a review

Xiang Peng et al.

Summary: Mg-Li alloys, as the lightest structural metallic materials, have a bright future in aerospace, weapon equipment, electronic technology, and transportation. The research focuses on the factors affecting plastic deformation, the impact of plastic deformation on microstructural evolution and mechanical properties, and the heat treatment behavior of Mg-Li alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of extrusion ratio and temperature on the microstructure and mechanical properties of Mg-Zn-Yb-Zr extrusion alloys

Hao Lv et al.

Summary: This study investigates the effects of extrusion ratios and temperatures on the microstructure and mechanical properties of magnesium alloys. The results show that different extrusion parameters affect the grain structure and mechanical performance of the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Corrosion behavior of fine-grained Mg-7.5Li-3Al-1Zn fabricated by extrusion with a forward-backward rotating die (KoBo)

Anna Dobkowska et al.

Summary: The microstructure-dependent corrosion resistance of dual structured fine-grained Mg-7.5Li-3Al-1Zn was investigated by controlling the extrusion ratio. The results showed that the refinement of α(Mg) and β(Li), as well as the distribution of second phases, played a crucial role in the corrosion resistance. However, increasing the extrusion ratio did not improve the corrosion resistance in a chloride-containing solution.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and strengthening mechanism of hot-extruded ultralight Mg-Li-Al-Sn alloys with high strength

Gang Zhou et al.

Summary: Duplex-structured Mg-7Li-2Al-1.5Sn alloys with high strength were fabricated and their strengthening mechanism was investigated. The alloys exhibited excellent high-temperature mechanical properties due to the presence of Sn-rich precipitates that prevent grain growth effectively.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Precipitation behaviors and mechanical properties of a solution-treated Mg-Gd-Nd-Zn-Zr alloy during equal-channel angular pressing process

Zhenzhen Gui et al.

Summary: Magnesium alloy processed by equal-channel angular pressing (ECAP) shows excellent microstructure refinement and enhanced strength and hardness, supporting its applications in various industries. Pre-treatment of solution-treated magnesium alloy investigated the precipitate behavior and microstructure evolution during ECAP, resulting in improved comprehensive mechanical properties.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of extrusion conditions on microstructure and mechanical properties of Mg-2Gd-0.3Zr magnesium alloy

Tianshuo Zhao et al.

Summary: Different extrusion conditions can affect the microstructure and mechanical properties of magnesium alloys. Increasing extrusion speed and annealing time can accelerate the growth of recrystallized grains and increase elongation. Large pre-forging deformation can refine the grains and increase the strength of the alloy. Decreasing extrusion ratio or increasing cooling rate will introduce coarse un-DRXed grains and transform the texture. Rapid cooling also has an obvious effect on refining recrystallized grains.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Thermal Mechanisms of Grain Refinement in Steels: A Review

Zahra Nasiri et al.

Summary: This review discusses the thermal mechanisms of microstructural refinement in steels, focusing on processes like thermal cycling, martensite process, and static recrystallization (SRX). Recent advancements in grain refinement by thermal cycling and the application of the martensite process for low-carbon and DP steels are highlighted. The limitations and potential opportunities for grain refinement in steels using conventional and innovative processing routes are also presented.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of lithium content on the mechanical and corrosion behaviors of HCP binary Mg-Li alloys

Chuanqiang Li et al.

Summary: In this study, the microstructure, crystallographic texture, mechanical properties, and corrosion resistance of as-extruded HCP Mg-xLi (x = 1, 3, 5; in wt%) alloys were investigated. The results showed that the Mg-5Li alloy with high lithium content exhibited a low degree of dynamic recrystallization and strong prismatic texture, leading to higher mechanical strength along the extrusion direction. Additionally, the high lithium content improved the corrosion resistance of the alloy and mitigated groove-like corrosion.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process

Zhi Zhang et al.

Summary: Grain size significantly influences the strength and ductility of magnesium alloys, and refining grain size is a feasible strategy to prepare high-performance magnesium alloys. Further research and discussion on the effects of grain size on various magnesium alloys are needed to fully understand the key mechanisms.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys

B. N. Du et al.

Summary: A new Mg-Zn-Y-Nd alloy for degradable orthopedic implants was developed and the influences of Zn and Y content on microstructures and mechanical behaviors were discussed. Results showed that increasing Y content can enhance the tensile and compressive strength of the alloy, while decreasing elongation.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

A simultaneous enhancement of both strength and ductility by a novel differential-thermal ECAP process in Mg-Sn-Zn-Zr alloy

Tianshui Zhou et al.

Summary: The innovative differential-thermal ECAP process developed in this study enables Mg-SnZn-Zr (TZK) alloys to have good deformability and superior mechanical properties by activating non-basal slip, refining grains, and weakening texture. This new process provides beneficial insights into the development of high-performance Mg alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Modifying microstructures and tensile properties of Mg-Sm based alloy via extrusion ratio

Kai Guan et al.

Summary: The microstructure and tensile properties of a Mg-Sm-Zn-Zr alloy with various extrusion ratios were systematically investigated. It was found that a greater extrusion ratio led to increased dynamic recrystallization and weakened basal fiber texture, resulting in decreased strength but improved ductility. Additionally, TEM observations revealed the transformation of the dominant intermetallic phase during extrusion with high extrusion ratio.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Chemistry, Physical

Role of extrusion temperature on the microstructure evolution and tensile properties of an ultralight Mg-Li-Zn-Er alloy

Hao Ji et al.

Summary: The extrusion temperature plays a significant role in refining the microstructure and affecting the tensile properties of ultralight Mg10Li-5Zn-0.5Er alloy. The increase in extrusion temperature leads to changes in grain size and distribution, as well as variations in strength and elongation.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of heat-treatment on microstructure, mechanical and tribological properties of Mg-Li-Al based alloy

Rita Maurya et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A simultaneous improvement of both strength and ductility by Sn addition in as-extruded Mg-6Al-4Zn alloy

Xiao-Yuan Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3A1-(1,2,3)Sn alloys

Xiao-yang Chen et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Magnesium extrusion alloys: a review of developments and prospects

Zhuoran Zeng et al.

INTERNATIONAL MATERIALS REVIEWS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of samarium content on microstructure and mechanical properties of Mg-0.5Zn-0.5Zr alloy

Kai Guan et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Ce-rich RE on microstructure and mechanical properties of as-cast Mg-8Li-3Al-2Zn-0.5Nd alloy with duplex structure

Xiang Peng et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Designing high ductility in magnesium alloys

Rasool Ahmad et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of small additions of Zn on the microstructure, mechanical properties and corrosion resistance of WE43B Mg alloys

A. Koltygin et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of solutes on strength and ductility of Mg alloys

D. F. Shi et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of extruded Mg-6Er-3Y-1.5Zn-0.4Mn (wt.%) alloy with high strength at elevated temperature

Mingquan Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Effects of second phases on deformation behavior and dynamic recrystallization of as-cast Mg-4.3Li-4.1Zn-1.4Y alloy during hot compression

Yucheng Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hot deformation behavior and workability characteristic of a fine-grained Mg-8Sn-2Zn-2Al alloy with processing map

Weili Cheng et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Civil

Effect of aluminium on microstructure, mechanical property and texture evolution of dual phase Mg-8Li alloy in different processing conditions

Bhagat Singh Pugazhendhi et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties and microstructural evolution in a superlight Mg-7.28Li-2.19Al-0.091Y alloy fabricated by rolling

Furong Cao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Effects of 0.5 wt% Ce addition on microstructures and mechanical properties of a wrought Mg-8Gd-1.2Zn-0.5Zr alloy

Baishun Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Hall-Petch relationship in Mg alloys: A review

Huihui Yu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strengthening mechanisms in magnesium alloys containing ternary I, W and LPSO phases

N. Tahreen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Remarkably enhanced mechanical properties of Mg-8Gd-1Er-0.5Zr alloy on the route of extrusion, rolling and aging

Xiaobing Zheng et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of Sn and Y on the microstructure, texture, and mechanical properties of as-extruded Mg-5Li-3Al-2Zn alloy

Yuehua Sun et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of as-cast and extruded Mg-8Li-1Al-0.5Sn alloy

Xuesong Fu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Mechanistic origin and prediction of enhanced ductility in magnesium alloys

Zhaoxuan Wu et al.

SCIENCE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Designing a magnesium alloy with high strength and high formability

T. T. T. Trang et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ductility enhancement in Mg-0.2%Ce alloys

R. K. Sabat et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys

A. Imandoust et al.

JOURNAL OF MATERIALS SCIENCE (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of extrusion ratio on microstructure and mechanical properties of Mg-8Li-3A1-2Zn-0.5Y alloy with duplex structure

Shi Feng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Comparisons of microstructures and texture and mechanical properties of magnesium alloy fabricated by compound extrusion and direct extrusion

H. -J. Hu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets

Y. Zeng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The effect of extrusion conditions on the properties and textures of AZ31B alloy

Qiang Liu et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of microstructure in AZ91 alloy processed by high-pressure torsion

Ahmed S. J. Al-Zubaydi et al.

JOURNAL OF MATERIALS SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

The microstructure, mechanical properties and degradation behavior of laser-melted Mg-Sn alloys

Yuanzhuo Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Chemistry, Physical

High-speed indirect extrusion of Mg-Sn-Al-Zn alloy and its influence on microstructure and mechanical properties

Sung Hyuk Park et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion

M. G. Jiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Chemistry, Physical

Effect of aging prior to extrusion on the microstructure and mechanical properties of Mg-7Sn-1Al-1Zn alloy

Jae-Gil Jung et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of icosahedral phase on the thermal stability and ageing response of a duplex structured Mg-Li alloy

D. K. Xu et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new high-strength extruded Mg-8Al-4Sn-2Zn alloy

Sung Hyuk Park et al.

MATERIALS LETTERS (2015)

添加到收藏夹

Article Chemistry, Physical

A high-specific-strength and corrosion-resistant magnesium alloy

Wanqiang Xu et al.

NATURE MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancing mechanical properties of Mg-Sn alloys by combining addition of Ca and Zn

Hucheng Pan et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of rolling directions on microstructure, mechanical properties and anisotropy of Mg-5Li-1Al-0.5Y alloy

Tianzi Wang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of texture on Hall-Petch relationships in an Mg alloy

Yi Wang et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical properties of Mg-xLi-3Al-1Sn-0.4Mn alloys (x=5, 8 and 11 wt%)

Yong-Ho Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of microstructure and mechanical properties of a duplex Mg-Li alloy under extrusion with an increasing ratio

Hanwu Dong et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of heat treatment on microstructure and mechanical properties of extruded AZ80 magnesium alloy

Degang Zhao et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Prediction of grain size and yield strength of Mg-7Sn-1Al-1Zn alloys extruded at various temperatures and speeds

Sung Hyuk Park et al.

METALS AND MATERIALS INTERNATIONAL (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improved mechanical properties of Mg-7.6Al-0.4Zn alloy through aging prior to extrusion

Jae-Gil Jung et al.

SCRIPTA MATERIALIA (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Current issues in magnesium sheet alloys: Where do we go from here?

Byeong-Chan Suh et al.

SCRIPTA MATERIALIA (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure, mechanical and corrosion properties of Mg-2Dy-xZn (x = 0, 0.1, 0.5 and 1 at.%) alloys

Guangli Bi et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2014)

添加到收藏夹

Article Chemistry, Physical

Effects of Li addition on the microstructure and mechanical properties of Mg-3Zn-1Sn-0.4Mn based alloys

Hyeon-Taek Son et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

High ductility of a Mg-Y-Ca alloy via extrusion

Na Zhou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of extrusion conditions on microstructure and mechanical properties of microalloyed Mg-Sn-Al-Zn alloys

F. R. Elsayed et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Extruded Mg-Zn-Ca-Mn alloys with low yield anisotropy

S. W. Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Chemistry, Physical

Influence of yttrium on microstructure and mechanical properties of as-cast Mg-5Li-3Al-2Zn alloy

Chongliang Cui et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of double aging and microalloying on the age hardening behavior of a Mg-Sn-Zn alloy

T. T. Sasaki et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy

W. Yuan et al.

SCRIPTA MATERIALIA (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-strength extruded Mg-Al-Ca-Mn alloy

S. W. Xu et al.

SCRIPTA MATERIALIA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy

K. Hagihara et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Chemistry, Physical

Microstructures and properties of superlight Mg-Li-Al-Zn wrought alloys

Xiangrui Meng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Al and Mn additions on rolling and deformation behavior of AZ series magnesium alloys

Faramarz Zarandi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of composition on the texture and deformation behaviour of wrought Mg alloys

N. Stanford et al.

SCRIPTA MATERIALIA (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strain hardening behavior of a friction stir welded magnesium alloy

N. Afrin et al.

SCRIPTA MATERIALIA (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the influence of the grain size and solute content on the AE response of magnesium alloys tested in tension and compression

Jan Bohlen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties and microstructures of various Mg-Li alloys

Tien-Chan Chang et al.

MATERIALS LETTERS (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

The grain size and texture dependence of tensile properties in extruded Mg-9Al-1Zn

M Mabuchi et al.

MATERIALS TRANSACTIONS (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlation of plastic deformation and dynamic recrystallization in magnesium alloy Zk60

A Galiyev et al.

ACTA MATERIALIA (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.