☆ 4.7 Article

Strain rate response of mechanical behaviors for Fe-8Mn-6Al-0.4C duplex low-density steels with different austenite stabilities

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Role of martensitic transformation sequences on deformation-induced martensitic transformation at high strain rates: A quasi in-situ study

Minghao Huang et al.

Summary: The study investigated the mechanical behavior of steels with metastable austenite and found that high strain rates can inhibit martensitic transformation, leading to a limitation in alloy design. Experimental results showed that as the strain rate increased, martensitic transformation sequences changed, ultimately suppressing DIMT kinetics. The work provides methods to enhance DIMT behavior by tailoring martensitic transformation sequences, offering a comprehensive explanation for the strain-rate dependence of DIMT.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of cooling rate on the precipitation behavior of.-carbide in Fe-32Mn-11Al-0.9C low density steel

Tinghui Man et al.

Summary: The effect of cooling rate on the precipitation behavior of kappa-carbide in Fe-32Mn-11Al-0.9C low density steel was studied. The results showed that decreasing the cooling rate resulted in increased content and size of kappa-carbide precipitations, which had different effects on the nanohardness of austenite and delta-ferrite.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment

Biraj Kumar Sahoo et al.

Summary: The effect of aging treatment on the strength-ductility combination of intercritically annealed medium Mn steel was studied. The results showed that both one-stage and two-stage aging treatments significantly improved the strength-ductility product of the steel. One-stage aging resulted in the formation of nano-sized NiAl precipitates, while two-stage aging led to phase-selective precipitation of varying sizes of NiAl. The two-stage aged sample exhibited a combination of TRIP-TWIP effect and precipitation strengthening, leading to sustained three-stage work-hardening during deformation and improved strength-ductility combination.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of cold rolling and subsequent heat treatment on microstructural evolution and mechanical properties of Fe-Mn-Al-C-(Ni) based austenitic low-density steels

Bidyapati Mishra et al.

Summary: This study evaluates the effects of thermo-mechanical processing on the strength-ductility combination of low-density steel. The results show that the alloy composition, cold rolling, and heat treatment temperature influence the concurrent precipitation of particles and recrystallization, as well as the mechanical properties. The Mn/Ni ratio plays a crucial role in controlling the precipitation and recrystallization, leading to variations in the mechanical properties. The findings highlight the importance of precise control of processing parameters in enhancing the strength-ductility combination of low-density steel.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile deformation behavior related with strain-induced martensitic transformation in a duplex Fe-Mn-Al-C low-density steel

Peng Chen et al.

Summary: The tensile deformation behavior of a duplex steel with banded ferrite and austenite structure was studied. The steel shows a good strength-ductility match and a three-stage deformation behavior, which is influenced by transformation-induced plasticity, twinning-induced plasticity, and dislocation slipping. The TWIP effect is only active in the final deformation stage, while the TRIP effect plays an important role throughout the majority of the deformation process.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Strain Rate Effect on Microstructural Evolution and Deformation Behavior of Medium-Mn Transformation-Induced Plasticity Steels

Naipeng Zhou et al.

Summary: This study investigates the effect of strain rate on the microstructural evolution and deformation behavior of medium-Mn TRIP steels, revealing a negative correlation between UTS and strain rate, with TE reaching a maximum of 32.0% at 10(-2) s(-1) before decreasing. The evolution of strain-induced martensitic transformation under different strain rates influences the fracture transition between quasicleavage fracture and ductile fracture in these steels.

STEEL RESEARCH INTERNATIONAL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation mechanisms of a novel Mn-based 1 GPa TRIP/TWIP assisted lightweight steel with 63% ductility

Shenghui Sun et al.

Summary: By utilizing the Mn preservation-cold rolling-intercritical annealing route, a novel Mn-based lightweight steel with bimodal grain size distribution was obtained, showing a good balance of high strength and high ductility. The bimodal distribution of austenite grains triggered multi-stage TRIP effects and TWIP-coordinated TRIP effects, improving strain hardening ability while maintaining high tensile ductility.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strain Rate Dependent Ductility and Strain Hardening in Q&P Steels

Christopher B. Finfrock et al.

Summary: Q&P steels have the potential to reduce vehicle mass and energy consumption, enhancing ductility and strain hardening through DIMT. Precise control of austenite stability is crucial for improving mechanical performance. Increasing strain rates may lead to reduced uniform elongation and a need to balance competing effects for further optimization.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of the thermal stability of metastable austenite in steels: Martensite formation

Yong Li et al.

Summary: The study reviews the importance of the thermal stability of metastable austenite in the design of advanced high-strength steels, providing guidance for tailoring the stability of metastable austenite and achieving desirable microstructure. Both experimental and theoretical aspects are considered, discussing factors influencing thermal stability and reviewing kinetic models describing martensitic transformation.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of intercritical annealing temperature on multiphase microstructure evolution in ultra-low carbon medium manganese steel

Gang Liu et al.

Summary: The effect of intercritical annealing temperature on the multiphase microstructure evolution of 0.02C-7Mn steel was investigated, showing that the content and morphology of different phases strongly depended on the annealing temperature. The results indicated that decreasing the C and Mn contents, as well as increasing the lath size of reversed austenite, decreased the thermal stability and stacking fault energy, leading to different martensitic transformations under varying intercritical annealing temperatures.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Competing deformation mechanisms in an austenite-ferrite medium-Mn steel at different strain rates

Z. H. Cai et al.

Summary: The study focused on the mechanical behavior and deformation mechanisms of Fe-0.2C-11Mn-2Al medium-Mn steel at different strain rates. The ultimate tensile strength and uniform elongation varied with increasing strain rate, with different deformation mechanisms dominating at different strain rates.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Transformation-induced plasticity (TRIP) in advanced steels: A review

Maryam Soleimani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Austenite stability and deformation-induced transformation mechanism in cold-rolled medium-Mn steel

T. P. Zhou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural evolution and tensile properties of 70 GPa.% grade strong and ductile hot-rolled 6Mn steel treated by intercritical annealing

Jiajia Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents

J. T. Benzing et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coupling nano-carbide strengthening with transformation induced plasticity effect to achieve over 1.5 GPa strength with 30% ductility in cold-rolled medium-Mn steel

Jiajia Li et al.

VACUUM (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crucial microstructural feature to determine the impact toughness of intercritically annealed medium-Mn steel with triplex-phase microstructure

Min Tae Kim et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite

Binhan Sun et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

A general perspective of Fe-Mn-Al-C steels

O. A. Zambrano

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of annealing temperature on microstructure and tensile property of cold-rolled Fe-0.2C-11Mn-6Al steel

Z. H. Cai et al.

MATERIALS CHARACTERIZATION (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and tensile behavior of Fe-8Mn-6Al-0.2C low density steel

Xuan Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dislocation activities at the martensite phase transformation interface in metastable austenitic stainless steel: An in-situ TEM study

Jiabin Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Characterization of fracture in medium Mn steel

Hongki Choi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Current state of Fe-Mn-Al-C low density steels

Shangping Chen et al.

PROGRESS IN MATERIALS SCIENCE (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Interpretation of dynamic tensile behavior by austenite stability in ferrite-austenite duplex lightweight steels

Jaeyeong Park et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Dramatic improvement of strain hardening and ductility to 95% in highly-deformable high-strength duplex lightweight steels

Seok Su Sohn et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Engineering, Mechanical

Stacking Fault Energy Maps of Fe-Mn-Al-C-Si Steels: Effect of Temperature, Grain Size, and Variations in Compositions

O. A. Zambrano

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of the strain rate on the tensile properties of a TRIP-aided duplex stainless steel

Jeom Yong Choi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Austenite Stability on Microstructural Evolution and Tensile Properties in Intercritically Annealed Medium-Mn Lightweight Steels

Hyejin Song et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical stability of individual austenite grains in TRIP steel studied by synchrotron X-ray diffraction during tensile loading

R. Blonde et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Martensite transformation of sub-micron retained austenite in ultra-fine grained manganese transformation-induced plasticity steel

Seok-Jae Lee et al.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Prediction of Martensite Start Temperature in Alloy Steels with Different Grain Sizes

Seok-Jae Lee et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of Al addition on high strain rate deformation of fully austenitic high Mn steels

Si Woo Hwang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

New low carbon Q&P steels containing film-like intercritical ferrite

M. J. Santofimia et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Austenite grain size and the martensite-start temperature

Hong-Seok Yang et al.

SCRIPTA MATERIALIA (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels

E. Jimenez-Melero et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Mechanics

Grain size effects in multiphase steels assisted by transformation-induced plasticity

S. Turteltaub et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)

添加到收藏夹

Article Engineering, Industrial

Formability of steel sheet in high velocity impact

M Seth et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanism-based strain gradient crystal plasticity - I. Theory

CS Han et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of strain rate on the strain-induced γ→α′-martensite transformation and mechanical properties of austenitic stainless steels

J Talonen et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of grain refinement on thermal stability of metastable austenitic steel

S Takaki et al.

MATERIALS TRANSACTIONS (2004)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes

G Frommeyer et al.

ISIJ INTERNATIONAL (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Driving force for γ→ε martensitic transformation and stacking fault energy of γ in Fe-Mn binary system

YK Lee et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.