☆ 4.7 Article

Ti-containing 316L stainless steels with excellent tensile properties fabricated by directed energy deposition additive manufacturing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Influence of Si content on the microstructure and mechanical properties of silicon stainless steel

Prince Setia et al.

Summary: The study investigated the influence of Si addition on the microstructure and mechanical behavior of cast silicon stainless steel alloys, revealing significant changes in microstructure and mechanical properties with varying Si content. Si incorporation improved strength and ductility in primarily austenitic microstructure, but higher Si content led to a duplex structure and reduced ductility. Nanoindentation characterization suggested significant improvements in hardness and modulus of the austenite phase after Si incorporation. Further analysis indicated a correlation between mechanical properties and crystallographic orientation of grains, showing highly anisotropic behavior. Lastly, nanomechanical properties were used to predict bulk mechanical properties with ECM model, highlighting the need for refined models for materials with duplex microstructure.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Ti Addition on the Precipitation Mechanism and Precipitate Size in Nb-Microalloyed Steels

Jun Xing et al.

Summary: The effect of Ti microalloying on the precipitation of NbC particles in Nb-microalloyed and Nb-Ti-microalloyed steels was investigated. The results show that Ti microalloying can contribute to the refinement of the precipitate size and increase the volume fraction of NbC particles.

METALS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Additive manufacturing of martensitic stainless steel matrix composites with simultaneously enhanced strength-ductility and corrosion resistance

Wei Chen et al.

Summary: Through the configuration design of ceramic particles, additively manufactured martensitic stainless steel can be strengthened with an optimized combination of high strength and increased ductility. In addition, this steel shows excellent resistance to severe localized corrosion and has unique microstructures and a progressive transformation-induced plasticity effect.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Titanium microalloying of steel: A review of its effects on processing, microstructure and mechanical properties

Shuize Wang et al.

Summary: This article reviews the effects of Ti microalloying on the phase formation, microstructural evolution, precipitation behavior of low-carbon steel during the steel making process, especially the thin slab casting and continuous rolling process, as well as the mechanical properties of final steel products. The future development of Ti microalloying technology in steel is also proposed.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion

Thomas Voisin et al.

Summary: The rapid solidification cellular structures in 316L austenitic stainless steels fabricated by laser powder-bed-fusion were found to have specific crystallographic orientations in cell walls, which act as barriers to dislocation movement and contribute to material strengthening. Additionally, oxide precipitates confined inside cell walls also enhance the material's strength. Overall, the understanding of these intrinsic characteristics and strengthening mechanisms can help improve the material's thermal stability and high strength.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel

Luqing Cui et al.

Summary: The relationship between microstructures and hardening nature of laser powder bed fused (L-PBF) 316 L stainless steel has been studied, showing that the hardness of the alloy is predominantly governed by GNDs. During annealing treatments, the migration of GNDs and the decrease of SSD density play important roles in the hardness variation of the material.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Heat treatment effect on the microstructure, mechanical properties, and wear behaviors of stainless steel 316L prepared via selective laser melting

Won-Sang Shin et al.

Summary: The study investigates the impact of heat treatment on the microstructure, mechanical properties, and wear behaviors of stainless steel 316L produced via selective laser melting. Heat treatments were found to improve elongation and microstructural evolution, but decreased surface hardness and tensile strength. The study concluded that heat treatment can enhance the performance of SS316L fabricated through SLM.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Structural integrity and mechanical properties of the functionally graded material based on 316L/IN718 processed by DED technology

Daniel Melzer et al.

Summary: The study focused on investigating the mechanical and structural properties of Functionally Graded Composites (FGC) made of stainless steel 316L and Inconel 718 using Blown Powder Directed Energy Deposition system. Tensile tests and fracture toughness tests were conducted to analyze mechanical properties within single layers and over layers transitions, while metallographic and fractographic investigations revealed differences in interfaces between materials layers and the weakest points of the Functionally Graded Composite.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The study of hot deformation on laser cladding remanufactured 316L stainless steel

Yuehan Liu et al.

Summary: The study investigates the feasibility of a new hybrid remanufacturing method by integrating LCD with subsequent hot deformation to enhance mechanical properties and reduce hardness variations in the cladding layer. By applying compressive deformation and optimizing process conditions, a high-quality metallurgical joint with improved ultimate tensile strength and yield strength was achieved. A dynamic recrystallization process was observed to be the underlying mechanism for the enhancement in mechanical properties.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Realization of synergistic enhancement for fracture strength and ductility by adding TiC particles in wire and arc additive manufacturing 2219 aluminium alloy

Peng Jin et al.

Summary: Adding TiC particles improved the microstructure and mechanical properties of 2219 Al-Cu alloy, leading to enhanced strength and toughness of the alloy. The fine spot-like phases and dispersed TiC particles within the grains played a key role in promoting the formation of dislocations, ultimately improving the tensile strength and elongation of the deposited sample.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Directed Energy Deposition of AISI 316L Stainless Steel Powder: Effect of Process Parameters

Alberta Aversa et al.

Summary: This study investigates the effect of building parameters on the microstructure and tensile properties of AISI 316L stainless-steel samples produced via LP-DED, finding a correlation between tensile properties and dislocation free path, indicating that porosity should not be the sole indicator of quality in LP-DED parts.

METALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Oxide dispersion strengthened stainless steel 316L with superior strength and ductility by selective laser melting

Yuan Zhong et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: Multiscale investigation

Bassem Barkia et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evolution of cellular dislocation structures and defects in additively manufactured austenitic stainless steel under ion irradiation

Shilei Li et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Automation & Control Systems

Microstructure and mechanical properties of 316L austenitic stainless steel processed by different SLM devices

A. Roettger et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Microstructure and Mechanical Properties of AISI 316L Produced by Directed Energy Deposition-Based Additive Manufacturing: A Review

Abdollah Saboori et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on the precipitation and coarsening of TiN inclusions in Ti-microalloyed steel by a modified coupling model

Lintao Gui et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

K. M. Bertsch et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Selective laser melting of dispersed TiC particles strengthened 316L stainless steel

Wengang Zhai et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Optics

Microstructure and hardness response of novel 316L stainless steel composite with TiN addition fabricated by SLM

Dhritti Tanprayoon et al.

OPTICS AND LASER TECHNOLOGY (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effect of TiN addition on corrosion behavior of spark plasma sintered 304L austenitic stainless steel in chloride media

Samuel Olukayode Akinwamide et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical characteristics of multi-layered materials composed of 316L stainless steel and ferritic steel produced by direct energy deposition

Dong-Kyu Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modelling particle impact on the melt pool and wettability effects in laser directed energy deposition additive manufacturing

James C. Haley et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of temperature on the stacking fault energy and deformation behaviour in 316L austenitic stainless steel

David Molnar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Optics

Repairing additive-manufactured 316L stainless steel using direct energy deposition

Wook Jin Oh et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Application of Directed Energy Deposition-Based Additive Manufacturing in Repair

Abdollah Saboori et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanism of high yield strength and yield ratio of 316 L stainless steel by additive manufacturing

Y. J. Yin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of build geometry and orientation on microstructure and properties of additively manufactured 316L stainless steel by laser metal deposition

Monideepa Mukherjee

MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Additively manufactured hierarchical stainless steels with high strength and ductility

Y. Morris Wang et al.

NATURE MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing

Xiaohui Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting

Bandar AlMangour et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement

S. J. Sun et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Chemistry, Physical

Grain Structure Control of Additively Manufactured Metallic Materials

Fuyao Yan et al.

MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting

R. Casati et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of strain rate and dislocation density on the twinning behavior in tantalum

Jeffrey N. Florando et al.

AIP ADVANCES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of stainless steel parts by Laser Metal Deposition Shaping

Kai Zhang et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Simultaneously increasing the strength and ductility of nano-sized TiN particle reinforced Al-Cu matrix composites

Dongshuai Zhou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strain hardening behavior of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) austenitic stainless steel and relationship with grain size and deformation mechanism

V. S. A. Challa et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles

F. K. Yan et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlation of Yield Strength and Tensile Strength with Hardness for Steels

E. J. Pavlina et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tensile properties of a nanocrystalline 316L austenitic stainless steel

XH Chen et al.

SCRIPTA MATERIALIA (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hall-Petch relation and boundary strengthening

N Hansen

SCRIPTA MATERIALIA (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.