相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Multi-functional polyamide 12 (PA12)/multiwall carbon nanotube 3D printed nanocomposites with enhanced mechanical and electrical properties
Nectarios Vidakis et al.
ADVANCED COMPOSITE MATERIALS (2022)
Optimization of composite extrusion modeling process parameters for 3D printing of low-alloy steel AISI 8740 using metal injection moulding feedstock
Abdullah Riaz et al.
MATERIALS & DESIGN (2022)
3D printing and assembling of frame modules using printable strain-hardening cement-based composites (SHCC)
Egor Ivaniuk et al.
MATERIALS & DESIGN (2022)
Dynamic polymer network conductive Nanocomposites: Low percolation threshold and Joule-heating-induced network plasticity
Zhen Sang et al.
CHEMICAL ENGINEERING JOURNAL (2022)
3D printing of ABS Nanocomposites. Comparison of processing and effects of multi-wall and single-wall carbon nanotubes on thermal, mechanical and electrical properties
Sithiprumnea Dul et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
3D printing of natural fiber and composites: A state-of-the-art review
Xiaoyu Bi et al.
MATERIALS & DESIGN (2022)
Recent progress and multifunctional applications of 3D printed graphene nanocomposites
Deepalekshmi Ponnamma et al.
COMPOSITES PART B-ENGINEERING (2021)
Flexible eco-friendly multilayer film heaters
Liberata Guadagno et al.
COMPOSITES PART B-ENGINEERING (2021)
3D-printing of segregated carbon nanotube/polylactic acid composite with enhanced electromagnetic interference shielding and mechanical performance
Yan Wang et al.
MATERIALS & DESIGN (2021)
Carbon nanotubes and expanded graphite based bulk nanocomposites for de-icing applications
L. Vertuccio et al.
COMPOSITES PART B-ENGINEERING (2021)
Interfacial thermal conductance of in situ aluminum-matrix nanocomposites
Shuaihang Pan et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Polycarbonate based multifunctional self-sensing 2D and 3D printed structures for aeronautic applications
P. Costa et al.
SMART MATERIALS AND STRUCTURES (2021)
Additive manufacturing of multifunctional polylactic acid (PLA)-multiwalled carbon nanotubes (MWCNTs) nanocomposites
Nectarios Vidakis et al.
NANOCOMPOSITES (2021)
Effect of electron concentration on electrical conductivity in in situ Al-TiB2 nanocomposites
Shuaihang Pan et al.
APPLIED PHYSICS LETTERS (2020)
Self-heating 3D printed continuous carbon fiber/epoxy mesh and its application in wind turbine deicing
Yueke Ming et al.
POLYMER TESTING (2020)
Damage Monitoring of Structural Resins Loaded with Carbon Fillers: Experimental and Theoretical Study
Giovanni Spinelli et al.
NANOMATERIALS (2020)
3D printing of multi-material composites with tunable shape memory behavior
Chao Yuan et al.
MATERIALS & DESIGN (2020)
Electrical conductivity of spark plasma sintered Al2O3-SiC and Al2O3-carbon nanotube nanocomposites
I Momohjimoh et al.
CERAMICS INTERNATIONAL (2020)
In-situ X-ray scattering study of isotactic polypropylene/graphene nanocomposites under shear during fused deposition modeling 3D printing
Yuval Shmueli et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review
Nestor Washington Solis Pinargote et al.
NANOMATERIALS (2020)
Design of Multifunctional Composites: New Strategy to Save Energy and Improve Mechanical Performance
Liberata Guadagno et al.
NANOMATERIALS (2020)
3D printing of PVA/hexagonal boron nitride/bacterial cellulose composite scaffolds for bone tissue engineering
Deniz Aki et al.
MATERIALS & DESIGN (2020)
Thermal conductivity of GP/ZnO@CNTs nanocomposites improved greatly by orientation of CNTs under shear field
Mengjie Dong et al.
COMPOSITES COMMUNICATIONS (2020)
Maximization of FDM-3D-Objects Gonio-Appearance Effects Using PLA and ABS Filaments and Combining Several Printing Parameters: A Case Study
Barbara Mico-Vicent et al.
MATERIALS (2019)
Nanocarbon/Poly(Lactic) Acid for 3D Printing: Effect of Fillers Content on Electromagnetic and Thermal Properties
Giovanni Spinelli et al.
MATERIALS (2019)
Additive Manufacturing of Biomaterials - The Evolution of Rapid Prototyping
Maria Touri et al.
ADVANCED ENGINEERING MATERIALS (2019)
FDM 3D printing of MWCNT re-inforced ABS nano-composite parts with enhanced mechanical and electrical properties
H. Kursad Sezer et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Guo Dong Goh et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Recent Advances on 3D Printing Technique for Thermal-Related Applications
Nam Nguyen et al.
ADVANCED ENGINEERING MATERIALS (2018)
Smart coatings of epoxy based CNTs designed to meet practical expectations in aeronautics
L. Vertuccio et al.
COMPOSITES PART B-ENGINEERING (2018)
Morphological, rheological and electrical properties of composites filled with carbon nanotubes functionalized with 1-pyrenebutyric acid
L. Guadagno et al.
COMPOSITES PART B-ENGINEERING (2018)
Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
ChuanYi Foo et al.
SCIENTIFIC REPORTS (2018)
Highly Loaded Graphite-Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing
Alexis Maurel et al.
CHEMISTRY OF MATERIALS (2018)
Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling
K. Prashantha et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2017)
Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling
Dingchun Zhu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Evaluating Eco-Efficiency of 3D Printing in the Aeronautic Industry
Fares Mami et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Recent advances in printable secondary batteries
Cheng-Feng Du et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
3D-printing of materials with anisotropic heat distribution using conductive polylactic acid composites
Yuan Zhuang et al.
MATERIALS & DESIGN (2017)
Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating
Charles B. Sweeney et al.
SCIENCE ADVANCES (2017)
Effect of carbon nanotube and functionalized liquid rubber on mechanical and electrical properties of epoxy adhesives for aircraft structures
L. Vertuccio et al.
COMPOSITES PART B-ENGINEERING (2017)
High through-plane thermal conductivity of polymer based product with vertical alignment of graphite flakes achieved via 3D printing
Yunchao Jia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Influence of carbon nanofillers on the curing kinetics of epoxy-amine resin
L. Vertuccio et al.
RSC ADVANCES (2015)
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Joseph T. Muth et al.
ADVANCED MATERIALS (2014)
3D-Printing of Lightweight Cellular Composites
Brett G. Compton et al.
ADVANCED MATERIALS (2014)
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Bethany C. Gross et al.
ANALYTICAL CHEMISTRY (2014)
Self-assembled multi-layered carbon nanofiber nanopaper for significantly improving electrical actuation of shape memory polymer nanocomposite
Haibao Lu et al.
COMPOSITES PART B-ENGINEERING (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Electrical conductivity and Joule heating of polyacrylonitrile/carbon nanotube composite fibers
An-Ting Chien et al.
POLYMER (2014)
MD simulation of the frictional behavior of CNTs with respect to orientation
Hyun-Joon Kim et al.
TRIBOLOGY INTERNATIONAL (2012)
Enhancing aerospace engineering students' learning with 3D printing wind-tunnel models
Ehud Kroll et al.
RAPID PROTOTYPING JOURNAL (2011)
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2010)