☆ 4.7 Review

A review of micro/nanostructure effects on the machining of metallic materials

MATERIALS & DESIGN (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Excellent soft magnetic properties in Co-based amorphous alloys after heat treatment at temperatures near the crystallization onset

M. G. Nematov et al.

Summary: The effect of heat treatment near the crystallization onset on Co-based amorphous microwires was investigated for micromagnetic structure, magnetostriction, and magnetoimpedance. The hysteresis loops of the microwires changed shape as the annealing temperature approached the crystallization temperature, producing unique magnetic properties. The formation of an easy anisotropy direction was confirmed, and the origin of this anisotropy was found to be different from that induced by current annealing below the Curie temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of metals: Microstructure evolution and multistage control

Zhiyuan Liu et al.

Summary: This review explores the fundamental procedures of additive manufacturing, including the formation and binding of melt pools, and discusses the evolution mechanisms of microstructures during the process. The review also proposes multistage control methods based on solidification and dislocation theories. Additionally, it addresses the design of microstructures for additive manufacturing through adjustment of process parameters and alloy composition.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Machining-induced surface integrity of Inconel 718 alloy fabricated by powder bed fusion additive manufacturing under various laser processing parameters

Emre Tascioglu et al.

Summary: This study systematically investigates the influence of LPBF processing parameters on the surface integrity and machinability of Inconel 718 components, finding that parameter settings have a significant impact on the performance of the components, requiring post-processing to enhance their surface properties.

MACHINING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Atomic-scale observation of non-classical nucleation-mediated phase transformation in a titanium alloy

Xiaoqian Fu et al.

Summary: This study reveals a complete kinetic pathway of a non-classical nucleation-induced phase transformation in a technologically important titanium alloy, providing experimental evidence at sub-angstrom resolution. The presence of a metastable phase bridging two main phases is confirmed, with unique structural features and transformation mechanism identified. This non-classical phase evolution mechanism is expected to be more common than previously believed for solid-state transformations.

NATURE MATERIALS (2022)

添加到收藏夹

Article Engineering, Aerospace

Effect of grain refinement on cutting force of difficult-to-cut metals in ultra-precision machining

Renjie Ji et al.

Summary: This study investigates the effect of surface grain refinement on cutting force in nickel-based superalloy Inconel 718 treated with Coupled Ultrasonic and Electric Pulse Treatment (CUEPT). Experimental results demonstrate that the cutting force increases with decreasing surface grain size. A mathematical model is established to describe the relationship between grain size and cutting force, and the calculated results are in good agreement with the experimental results. The increase in cutting force after grain refinement is attributed to the improved stability of grain boundaries and increased number of grain boundaries.

CHINESE JOURNAL OF AERONAUTICS (2022)

添加到收藏夹

Article Chemistry, Physical

The effect of anisotropy of nickel-based single crystal alloys on the surface quality of sub-nanometer and near atomic scale cutting

Zaizhen Lou et al.

Summary: This study analyzes the relationship between dislocation emission and energy change in the sub nano and near atomic scale cutting process of nickel-based single crystal alloys, as well as the effect of crystal orientation on dislocation slip and surface roughness. The formation mechanism of the subsurface deformation layer is revealed, providing technical support for the development of SN-NAS cutting of nickel-based alloys.

INTERMETALLICS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Tracking the sliding of grain boundaries at the atomic scale

Lihua Wang et al.

Summary: Grain boundaries (GBs) are crucial for the mechanical behavior of polycrystalline materials, yet the atomic-scale dynamic processes of GB deformation remain unclear. This study presents an in situ atomic-resolution investigation on how sliding-dominant deformation occurs at general tilt GBs in platinum bicrystals, involving direct atomic-scale sliding and sliding with atom transfer across the boundary plane.

SCIENCE (2022)

添加到收藏夹

Article Engineering, Manufacturing

Generation mechanism and dual-dynamics simulation of surface patterns in single-point diamond turning of single-crystal copper

Guoqing Zhang et al.

Summary: This study investigates the generation mechanism of fan-shaped patterns during single-point diamond turning (SPDT) of single-crystal copper. Both theoretical and experimental analyses were conducted to study the fan-shaped patterns, surface quality, cutting force, and chip morphology on different crystal planes of single-crystal copper. The research reveals that fluctuations in the friction coefficient caused by the different atom density arrangement directions and the main cutting direction result in the vibration of the cutting system and the generation of fan-shaped patterns. The SPDT of crystal plane (100) achieves the best surface quality. This study provides a fundamental understanding of fan-shaped pattern formation on the machined surface and offers insights for improving the surface quality in machining of single-crystal copper.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Machinability of TiC-reinforced titanium matrix composites fabricated by additive manufacturing

Guowen Qiao et al.

Summary: This study found that different AM parameters led to different microstructures, affecting the machinability of TiC-TMCs. Compared to specimens with coarse dendritic TiC, those with fine equiaxed TiC exhibited better machined surface quality and lower tool wear, resulting in improved machinability.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Machinability performance and mechanism in milling of additive manufactured Ti6Al4V with polycrystalline diamond tool

Yongsheng Su et al.

Summary: This paper investigated the machinability of SLM Ti6Al4V and conventional Ti6Al4V, and compared and analyzed their differences in microstructure, hardness, cutting force, etc. The results showed that SLM Ti6Al4V has lower cutting force and better surface quality. Additionally, it was found that the plasticity of SLM Ti6Al4V has no effect on reducing chip adhesion.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel

J. P. Oliveira et al.

Summary: This study investigates the improvement of joint performance between high entropy alloys and stainless steel by changing the base material condition. The microstructure evolution and mechanical performance of the welded joint are evaluated, and the composition changes across the fusion zone are considered to predict the microstructure evolution. The results provide insights into the mechanism for improving joint performance.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on the Milling of Additive Manufactured Components

Robert Laue et al.

Summary: The paper compares the influence of different additive manufacturing processes on milling processes and finds that additive manufacturing results in significant differences in machinability. Mechanical properties alone are not sufficient to provide information on machinability.

METALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy

Jiajia Shen et al.

Summary: This study investigated the gas tungsten arc welding of an as-cast AlCoCrFeNi2.1 alloy and analyzed the microstructural evolution and strength distribution of the welded joints. The results showed that the weld thermal cycle caused variations in the relative volume fractions of the FCC + B2 BCC eutectic structure across the joint. BCC nanoprecipitates in the base material dissolved into the matrix in the heat affected zone and closer to the fusion zone boundary. The fusion zone exhibited grain refinement and increased hardness compared to the as-cast base material. The joints demonstrated a good balance of strength and ductility with failure occurring in the base material. This study establishes the potential for using arc-based welding for joining eutectic high entropy alloys.

MATERIALS & DESIGN (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

Resource saving by optimization and machining environments for sustainable manufacturing: A review and future prospects

Danil Yu Pimenov et al.

Summary: The preservation of energy and natural resources is the most important aspect of sustainability in manufacturing. Optimized processes and increased energy efficiency are key in minimizing negative impacts on the environment. Using low, clean, and renewable energy sources, as well as adopting environmentally friendly cooling methods, can help achieve more sustainable production.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of cold metal transfer mode on the microstructure and machinability of Ti-6Al-4V alloy fabricated by wire and arc additive manufacturing in ultra-precision machining

Jian Gou et al.

Summary: The effect of cold metal transfer (CMT) mode on ultra-precision machining (UPM) was studied to investigate its impact on phase transformation and surface integrity improvements for a wire and arc additive manufactured (WAAMed) Ti-6Al-4V alloy part. Both CMT and CMT thorn Pulse (CMT thorn P) modes were considered, with CMT thorn P mode having higher heat input. Phase transformation occurred in the reheated conditions of the CMT thorn P mode, resulting in changes in the number and size of different phases. UPM showed that cutting force increased with cutting speed, and specimens fabricated in CMT mode had slightly larger cutting forces and better surface quality.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wire and arc additive manufacturing of 316L stainless steel/Inconel 625 functionally graded material: development and characterization

Tiago A. Rodrigues et al.

Summary: In this study, a functionally graded material (FGM) of 316L stainless steel to Inconel 625 was built using Twin-Wire and Arc Additive Manufacturing (T-WAAM) with different deposition strategies. The properties of the FGM were found to be superior with a direct interface, showing higher strengths and elongations upon failure, as well as lower residual stresses.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Engineering, Manufacturing

Wire-based directed energy deposition of NiTiTa shape memory alloys: Microstructure, phase transformation, electrochemistry, X-ray visibility and mechanical properties

Xinde Zuo et al.

Summary: This study demonstrates the use of WAAM technology for fabricating NiTiTa shape memory alloys, with the addition of Ta significantly enhancing corrosion resistance and X-ray visibility. The material shows promising potential for biomedical applications.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strengthening and ductilization of laminate dual-phase steels with high martensite content

Bo Gao et al.

Summary: By tailoring the microstructural features, steels with excellent strength and ductility can be achieved. In this work, laminate dual-phase (DP) steels with high martensite content were produced, leading to significantly improved strength and ductility. The influence of laminate structure and high martensite content were discussed, along with the strengthening and ductilizing mechanisms.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Automation & Control Systems

Wear mechanism and experimental study of a tool used for micro-milling single-crystal nickel-based superalloys

Qi Gao et al.

Summary: In studying the wear mechanism of micro-tools cutting superalloy materials, a single-crystal nickel-based superalloy DD98 was micro-milled using a cemented carbide milling tool with a 0.6-mm diameter. The wear standard and mathematical model for the micro-milling tool were established based on changes in tool diameter and groove bottom width after wear. Observations of the wear mechanism and wear form were made using scanning electron microscopy, and the influence of element changes on cutting processes and workpiece performance were analyzed through energy spectroscopy. The research provides theoretical significance for understanding the cutting mechanism of difficult-to-machine materials.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Automation & Control Systems

A physically based constitutive model of microstructural evolution of Ti6Al4V hard machining under different lubri-cooling conditions

Sergio Rinaldi et al.

Summary: This study investigated the microstructural phenomena of severely deformed materials during machining processes through hard turning experiments and microstructure-based numerical simulations. A physics-based model was developed and implemented in a commercial finite element software to predict the material viscoplastic flow and grain size related strengthening effects. The model showed good agreement between experimental measurements and numerical predictions, and demonstrated the capability to improve manufacturing process performances by analyzing additional machining conditions via finite element analysis.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Anisotropy effect of additively manufactured Ti6Al4V titanium alloy on surface quality after milling

Lucia Lizzul et al.

Summary: The study focuses on the microstructural and mechanical anisotropy of metallic additive manufactured parts, specifically on the influence of build-up orientation on alloy machinability. Results show that the horizontal orientation allows for better machinability, as demonstrated by the surface quality assessment.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Investigation of formability, microstructures and post-forming mechanical properties of heat-treatable aluminum alloys subjected to pre-aged hardening warm forming

Lin Hua et al.

Summary: The PHF process improves the formability of aluminum alloys, with stamping tests confirming the feasibility of the technique on cap beam components. Optical and transmission electron microscopy observations show that the grain sizes of pre-aged alloys are not significantly affected by the stamping process in the PHF process.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Engineering, Industrial

Ultracold-Wire and arc additive manufacturing (UC-WAAM)

Tiago A. Rodrigues et al.

Summary: This study introduces a new variant of Wire and Arc Additive Manufacturing called Ultracold-Wire and Arc Additive Manufacturing (UC-WAAM), which aims to improve part quality by reducing process temperatures and increasing cooling rates. Feasibility study was conducted on HSLA steel, demonstrating the potential of UC-WAAM for fabricating complex-shaped 3D structures without support.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Micro-mechanical behaviour of selective laser melted Ti6Al4V under compression

Abdulaziz Kurdi et al.

Summary: The mechanical properties and deformation behaviour of SLMed Ti6Al4V alloy are influenced by the microstructure and loading direction, resulting in anisotropy. The alloy exhibits higher yield and ultimate compressive strength compared to mill-annealed alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Engineering, Industrial

Microstructure and machinability of selective laser melted high-strength maraging steel with heat treatment

Yuchao Bai et al.

Summary: This paper investigates the surface quality and machinability of additively manufactured high-strength maraging steel through milling experiments, highlighting the influence of microstructure on machinability and providing theoretical basis for improving the machining quality of additively manufactured parts.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Investigating the effect of grain structure on compressive response of open-cell metal foam using high-fidelity crystal-plasticity modeling

Dongfang Zhao et al.

Summary: This study investigates the effect of grain structure on the compressive mechanical response of open-cell metallic foam through crystal-plasticity simulations. Results show a Hall-Petch-like trend in the relationship between grain size and plateau stress in the foams, with less pronounced effect of grain structure on plateau stress in the presence of an oxidation layer. By incorporating grain size and surface condition, the accuracy and generalizability of the Gibson-Ashby model for plastic collapse strength can be significantly enhanced.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Optics

On-machine noncontact scanning of high-gradient freeform surface using chromatic confocal probe on diamond turning machine

Yongqing Wang et al.

Summary: A noncontact scanning method for high-gradient freeform surfaces using a chromatic confocal probe was proposed in this study, achieving a balance between accuracy and efficiency and proving its effectiveness through on-machine inspection experiments.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Study on staged work hardening mechanism of nickel-based single crystal alloy during atomic and close-to-atomic scale cutting

ZhaoPeng Hao et al.

Summary: This paper studied the work hardening effect in the cutting process of nickel based single crystal alloys, proposed a new staged work hardening mechanism, and discussed the reasons for the change of hardening mechanism in different stages.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Performance evaluation of high-speed ultrasonic vibration cutting for improving machinability of Inconel 718 with coated carbide tools

Zhenlong Peng et al.

Summary: The study confirms that high-speed ultrasonic vibration cutting can significantly improve the machinability of Inconel 718, extending tool life, reducing cutting force, and decreasing cutting temperature.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Nanomechanical scratching induced local shear deformation and microstructural evolution in single crystal copper

Mert Efe et al.

Summary: The study demonstrates the practical application of shear deformation at the nanoscale using atomic force microscopy (AFM) for nanomechanical scratching in single-crystal copper. The results show the ability of AFM to induce local shear deformation and study its effects on the microstructure, with the material removal process through cutting mode enabling the use of stress and strain models developed for bulk machining.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Crystallography

Study on Phase Transformation Orientation Relationship of HCP-FCC during Rolling of High Purity Titanium

Fengmei Bai et al.

Summary: Research on high purity titanium thin strips prepared by rolling with large deformation revealed the occurrence of HCP-FCC phase transition, with a specific OR of &LANGBRAC;0001⟩(α)//&LANGBRAC;001⟩(FCC) and {101 over bar 0}(α)//{110}(FCC). The deep study of ORs of HCP-FCC phase transition using TKD pole figure and phase transformation matrix showed equivalent results that were consistent with TEM-SAED analysis, indicating the effectiveness of these methods in predicting possible FCC phase variants.

CRYSTALS (2021)

添加到收藏夹

Article Engineering, Industrial

Extracting HCP Zerilli-Armstrong material parameters for magnesium alloy AZ31B from orthogonal cutting tests

Charbel Y. Seif et al.

Summary: This study presents a methodology to extend Oxley's thick shear zone analysis to HCP materials and successfully extracts Zerilli-Armstrong constitutive equation material parameters for AZ31B from orthogonal cutting tests. By comparing numerical data with experiments, the determined AZ31B material model with updated parameters demonstrated predictability for cutting and thrust forces.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Investigation into surface integrity and magnetic property of FeSiB metallic glass in two-dimensional cutting

Zhenglong Fang et al.

Summary: In this study, the surface integrity of FeSiB foil metallic glass was investigated during two-dimensional cutting, revealing the formation of work-hardening layer and shear band phenomenon. Additionally, a decrease in magnetic flux density was observed, attributed to plastic strain-hardening effects.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Mechanical

Modeling and experimental study of machining outcomes when conducting nanoscratching using dual-tip probe on single-crystal copper

Yanquan Geng et al.

Summary: The study introduced a nanomachining method using a dual-tip probe and single-crystal copper as the sample material, successfully machining symmetrical three-dimensional nanostructures. A depth prediction model accurately predicted the nanoscratching process, but inaccuracies were observed at smaller machined depths.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grinding performance and wear of metal bond super-abrasive tools in grinding of Zr-based bulk metallic glass

Feng-lin Zhang et al.

Summary: BMG parts require grinding for high precision and surface finish, with Zr-BMG being ground using different diamond and CBN tools. Results show that diamond tools have lower grinding forces and Ni electroplated tools have lower grinding force compared to brazed ones. Zr-based BMG has higher grinding force and specific grinding energy than SS304 steel, with Ni electroplated tools obtaining lower surface roughness of Zr-BMG. Severe adhesion of Zr-BMG dominates tool wear, with Ni-electroplated tools producing less adhesion than brazed tools.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and machinability evaluation in micro milling of selective laser melted Inconel 718 alloy

Hansong Ji et al.

Summary: This study evaluates the microstructure and machinability of SLM fabricated IN718 during micro milling processes, comparing it with wrought IN718. Micro milling experiments were conducted with varying spindle speed and feed rate, and comparisons were made for tool wear, surface roughness, residual stress, and micro hardness.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Transition metal-based layered double hydroxides for photo(electro)chemical water splitting: a mini review

Rui Gao et al.

Summary: This article reviews recent advances in transition metal-based LDHs for photo(electro)chemical water splitting, covering synthesis routes, performance enhancements, and structure-property relationships.

NANOSCALE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Micromachining imposed subsurface plastic deformation in single-crystal aluminum

Sudhanshu Nahata et al.

Summary: Mechanical removal of metal leads to deformation, grain refinement, and lattice rotation beneath machined surfaces, varying significantly depending on the initial material's crystallographic orientation. Based on cutting force measurements, orientations can be categorized as hard or soft, with hard orientations exhibiting strain hardening and soft orientations showing shear bands and lattice rotations caused by cutting forces.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Review Chemistry, Physical

Recent Development of Ni/Fe-Based Micro/Nanostructures toward Photo/Electrochemical Water Oxidation

Rui Gao et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Thermodynamics

A microsphere-based material model for open cell metal foams

T. Bleistein et al.

CONTINUUM MECHANICS AND THERMODYNAMICS (2020)

添加到收藏夹

Review Materials Science, Composites

Developments in the aluminum metal matrix composites reinforced by micro/nano particles - A review

Neeraj K. Bhoi et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of Functionally Graded Tubes Based on Pure Al/Al2O3Metal Matrix Composites Manufactured by Centrifugal Casting for Automotive Applications

Bassiouny Saleh et al.

METALS AND MATERIALS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural evolution and defect formation in a powder metallurgy nickel-based superalloy processed by selective laser melting

Hongyu Wu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties and constitutive models of foamed steels under monotonic and cyclic loading

Mingzhou Su et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

A theoretical and experimental investigation of cutting forces and spring back behaviour of Ti6Al4V alloy in ultraprecision machining of microgrooves

Zejia Zhao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Mechanical

Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel

S. S. Xu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Industrial

Investigation on chip deformation behaviors of Zr-based bulk metallic glass during machining

Feng Ding et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the metallurgical joining mechanism during ultrasonic spot welding of NiTi using a Cu interlayer

Wei Zhang et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Engineering, Mechanical

The Influence of Machining Parameters on the Surface Porosity of a Closed-Cell Aluminium Foam

Bostjan Razborsek et al.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Analytical

Machinability and Surface Generation of Pd40Ni10Cu30P20 Bulk Metallic Glass in Single-Point Diamond Turning

Jie Xiong et al.

MICROMACHINES (2020)

添加到收藏夹

Article Automation & Control Systems

Twinned-serrated chip formation with minor shear bands in ultra-precision micro-cutting of bulk metallic glass

Sau Yee Chau et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Automation & Control Systems

Grain size influence on chip formation in high-speed machining of pure iron

Xiuxuan Yang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Comparison on grindability and surface integrity in creep feed grinding of GH4169, K403, DZ408 and DD6 nickel-based superalloys

Qing Miao et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Manufacturing

Microstructure attributes and tool wear mechanisms during high-speed machining of Ti-6Al-4V

Shiv Sharma et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties

E. A. Ariza-Echeverri et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL

Cagri Vakkas Yildirim et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Crystal anisotropy-dependent shear angle variation in orthogonal cutting of single crystalline copper

Zhanfeng Wang et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Tool wear behavior of vitrified microcrystalline alumina wheels in creep feed profile grinding of turbine blade root of single crystal nickel-based superalloy

Qing Miao et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Manufacturing

An investigation on machined surface quality and tool wear during creep feed grinding of powder metallurgy nickel-based superalloy FGH96 with alumina abrasive wheels

Ben-Kai Li et al.

ADVANCES IN MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Abrasive wear behavior of newly developed weld overlaid tillage tools in laboratory and in actual field conditions

Jagseer Singh et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of material anisotropy on ultra-precision machining of Ti-6Al-4V alloy fabricated by selective laser melting

Chenbing Ni et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys

Xiaoyan Li et al.

NATURE REVIEWS MATERIALS (2020)

添加到收藏夹

Article Engineering, Industrial

Optical surface generation on additively manufactured AlSiMg0.75 alloys with ultrasonic vibration-assisted machining

Yuchao Bai et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Effects of grain and twin boundary on friction and contact characteristics of CuZrAl nanocrystallines

Dinh-Quan Doan et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of anisotropy of nickel-based single crystal superalloy in atomic and close-to-atomic scale cutting

ZhaoPeng Hao et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of machining surface and laser beam scanning strategy on machinability of selective laser melted Ti6Al4V alloy in milling

Chenbing Ni et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Engineering, Industrial

Multiscale simulation of grain refinement induced by dynamic recrystallization of Ti6Al4V alloy during high speed machining

Xiang Xu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Prediction and control of surface roughness for the milling of Al/SiC metal matrix composites based on neural networks

Guo Zhou et al.

ADVANCES IN MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Effect of milling parameters on HSLA steel parts produced by Wire and Arc Additive Manufacturing (WAAM)

J. G. Lopes et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Mechanical

Influences of grain size and temperature on tribological characteristics of CuAlNi alloys under nanoindentation and nanoscratch

Dinh-Quan Doan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Review Automation & Control Systems

Micro machining of bulk metallic glasses: a review

Lin Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Grain size sensitive-MTS model for Ti-6Al-4V machining force and residual stress prediction

Yanfei Lu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper

Zhanfeng Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Microstructural effects of Ti6Al4V alloys modified by electropulsing treatment on ultraprecision diamond turning

Zejia Zhao et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Mechanism of Chip Segmentation in Orthogonal Cutting of Zr-Based Bulk Metallic Glass

Naresh Kumar Maroju et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)

添加到收藏夹

Article Automation & Control Systems

Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V

M. Neikter et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

New strategies for improvement of numerical model accuracy in machining of nickel-based alloy

Farshid Jafarian et al.

SIMULATION MODELLING PRACTICE AND THEORY (2019)

添加到收藏夹

Article Engineering, Industrial

Effects of grains and twins on deformation of commercial pure titanium in ultraprecision diamond turning

Zejia Zhao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

The effect of residual stresses, grain size, grain orientation, and hardness on the surface quality of Co-Cr L605 alloy in Photochemical Machining

Shrikant Thorat et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Optimisation of cutting parameters for improving energy efficiency in machining process

Hu Luoke et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

2D Cocrystallized Metal-Organic Nanosheet Array as an Efficient and Stable Bifunctional Electrocatalyst for Overall Water Splitting

Wen Ye et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Molecular dynamics and experimental study on comparison between static and dynamic ploughing lithography of single crystal copper

Gaobo Xiao et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation and analysis of drilling parameters of metal matrix (Ti/TiB) composites

T. Ramkumar et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Residual stress prediction based on MTS model during machining of Ti-6Al-4V

Zhipeng Pan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The Effect of Martensite-Austenite Constituent Characteristics on the Mechanical Behavior of Quenched-Partitioned Steel at Room Temperature

Mahdi Karam-Abian et al.

STEEL RESEARCH INTERNATIONAL (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent Advances in the Design and Fabrication of Strong and Ductile (Tensile) Titanium Metal Matrix Composites

Shudong Luo et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Investigation on chip formation and surface morphology in orthogonal machining of Zr-based bulk metallic glass

Karuna Dhale et al.

MANUFACTURING LETTERS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Material microstructure effects in micro-endmilling of Cu99.9E

A. M. Elkaseer et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)

添加到收藏夹

Article Automation & Control Systems

Milling performance optimization of DD5 Ni-based single-crystal superalloy

Qiang Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Review Automation & Control Systems

A review on metallic porous materials: pore formation, mechanical properties, and their applications

Biao Zhao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Determining the strengths of HCP slip systems using harmonic analyses of lattice strain distributions

Paul R. Dawson et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Engineering, Industrial

On the influence of gamma prime upon machining of advanced nickel based superalloy

Zhirong Liao et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Mechanics

Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites

Xiangyu Teng et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Molecular dynamics simulation to investigate the orientation effects on nanoscale cutting of single crystal copper

A. Sharma et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

添加到收藏夹

Article Automation & Control Systems

Investigation of cutting forces, surface integrity, and tool wear when high-speed milling of high-volume fraction SiCp/Al6063 composites in PCD tooling

Junfeng Xiang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

Experimental study on SiCp/Al composites with different volume fractions in high-speed milling with PCD tools

Shutao Huang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Manufacturing

Surface form error prediction in five-axis flank milling of thin-walled parts

Zhou-Long Li et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

添加到收藏夹

Article Engineering, Manufacturing

An investigation of resolved shear stress on activation of slip systems during ultraprecision rotary cutting of local anisotropic Ti-6Al-4V alloy: Models and experiments

Zejia Zhao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

添加到收藏夹

Article Engineering, Manufacturing

A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response

Eralp Demir et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

添加到收藏夹

Article Chemistry, Physical

EBSD study of beam speed effects on Ti-6Al-4V alloy by powder bed electron beam additive manufacturing

Xiaoqing Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Engineering, Industrial

Ultrasonic additive manufacturing of steel: Method, post-processing treatments and properties

Asaf Levy et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Microstructure effects on process outputs in micro scale milling of heat treated Ti6Al4V titanium alloys

Masoud Ahmadi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Physical

Facile formation of 2D Co2P@Co3O4 microsheets through in-situ toptactic conversion and surface corrosion: Bifunctional electrocatalysts towards overall water splitting

Lihua Yao et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Engineering, Manufacturing

Numerical simulation of the effects of elastic anisotropy and grain size upon the machining of AA2024

Hassan Ijaz et al.

MACHINING SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Material removal mechanism and surface integrity in ultraprecision cutting of porous titanium

Mehdi Heidari et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Dilatancy induced ductile-brittle transition of shear band in metallic glasses

F. Zeng et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2018)

添加到收藏夹

Review Engineering, Aerospace

Recent advances in the development of aerospace materials

Xuesong Zhang et al.

PROGRESS IN AEROSPACE SCIENCES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A physically based constitutive model for predicting the surface integrity in machining of Waspaloy

Stano Imbrogno et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A three-dimensional nickel-chromium layered double hydroxide micro/nanosheet array as an efficient and stable bifunctional electrocatalyst for overall water splitting

Wen Ye et al.

NANOSCALE (2018)

添加到收藏夹

Article Engineering, Manufacturing

Investigations on surface microstructure in high-speed milling of Zr-based bulk metallic glass

Naresh Kumar Maroju et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review

Lai-Chang Zhang et al.

ADVANCED ENGINEERING MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Femtosecond-Laser Direct Writing of Metallic Micro/Nanostructures: From Fabrication Strategies to Future Applications

Zhuo-Chen Ma et al.

SMALL METHODS (2018)

添加到收藏夹

Article Automation & Control Systems

Study on surface quality and subsurface recrystallization of nickel-based single-crystal superalloy in micro-grinding

Yunguang Zhou et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Mathematics, Applied

Orthogonal micro-cutting modeling of the Ti17 titanium alloy using the crystal plasticity theory

Y. Ayed et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2017)

添加到收藏夹

Article Nuclear Science & Technology

First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

A. Litnovsky et al.

FUSION ENGINEERING AND DESIGN (2017)

添加到收藏夹

Article Automation & Control Systems

Modeling of Ti-6Al-4V machining force considering material microstructure evolution

Zhipeng Pan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Manufacturing

Modelling of flow stress by correlating the material grain size and chip thickness in ultra-precision machining

M. Azizur Rahman et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

添加到收藏夹

Article Engineering, Manufacturing

MTS model based force prediction for machining of Ti-6Al-4V

Zhipeng Pan et al.

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2017)

添加到收藏夹

Article Engineering, Mechanical

Experimental study of micro-milling mechanism and surface quality of a nickel-based single crystal superalloy

Qi Gao et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A microstructure sensitive grain boundary sliding and slip based constitutive model for machining of Ti-6Al-4V

Patxi Fernandez-Zelaia et al.

MECHANICS OF MATERIALS (2017)

添加到收藏夹

Article Engineering, Mechanical

A comparative study of mechanical properties and machinability of wrought and additive manufactured (selective laser melting) titanium alloy - Ti-6Al-4V

Manikandakumar Shunmugavel et al.

RAPID PROTOTYPING JOURNAL (2017)

添加到收藏夹

Article Multidisciplinary Sciences

High dislocation density-induced large ductility in deformed and partitioned steels

B. B. He et al.

SCIENCE (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys

Stephane Gorsse et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)

添加到收藏夹

Article Engineering, Chemical

Atomistic Insights on the Wear/Friction Behavior of Nanocrystalline Ferrite During Nanoscratching as Revealed by Molecular Dynamics

A. T. AlMotasem et al.

TRIBOLOGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Iron diselenide nanoplatelets: Stable and efficient water-electrolysis catalysts

Rui Gao et al.

NANO ENERGY (2017)

添加到收藏夹

Article Engineering, Manufacturing

On the performance of modified Zerilli-Armstrong constitutive model in simulating the metal-cutting process

Murali Mohan Gurusamy et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Micro-machinability of bulk metallic glass in ultra-precision cutting

Xiao Chen et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of mechanical properties and anisotropy of ultra-fine grained 1050 aluminum sheets produced by incremental ECAP

M. Ciemiorek et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass

C. Gammer et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Review Engineering, Multidisciplinary

Effects of cutting parameters on machinability characteristics of Ni-based superalloys: a review

Eren Kaya et al.

OPEN ENGINEERING (2017)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Machinability of Hybrid Metal Matrix Composite - A Review

Anthony M. Xavior et al.

13TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (2017)

添加到收藏夹

Article Automation & Control Systems

Modelling and optimisation of surface roughness from microgrinding of nickel-based single crystal superalloy using the response surface methodology and genetic algorithm

Yunguang Zhou et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Automation & Control Systems

Influence of microstructure and hardness on machinability of heat-treated titanium alloy Ti-6Al-4V in end milling with polycrystalline diamond tools

Sarwar Ali Abbasi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Mechanical

Combined microstructure-based flow stress and grain size evolution models for multi-physics modelling of metal machining

Z. Atmani et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Engineering, Mechanical

On machining modeling of metal matrix composites: A novel comprehensive constitutive equation

A. Ghandehariun et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Engineering, Mechanical

Micro-cutting of single-crystal metal: Finite-element analysis of deformation and material removal

Qiang Liu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Engineering, Mechanical

The definition of characteristic times of plastic relaxation by dislocation slip and grain boundary sliding in copper and nickel

N. Selyutina et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

添加到收藏夹

Review Materials Science, Ceramics

Corrosion resistance of Fe-Cr-based amorphous alloys: An overview

C. A. C. Souza et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Size effects in finish machining of porous powdered metal for engineered surface quality

J. Schoop et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of the cutting edge radius and the material grain size on the cutting force in micro cutting

Xian Wu et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Identification of new material model for machining simulation of Inconel 718 alloy and the effect of tool edge geometry on microstructure changes

Farshid Jafarian et al.

SIMULATION MODELLING PRACTICE AND THEORY (2016)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Quantitative x-ray analysis: applications in machining of porous metallic foams

H. Qiao et al.

3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Photoelectrochemical Water Oxidation Efficiency of a Core/Shell Array Photoanode Enhanced by a Dual Suppression Strategy

Wanhong He et al.

CHEMSUSCHEM (2015)

添加到收藏夹

Article Engineering, Industrial

A physically based constitutive model for simulation of segmented chip formation in orthogonal cutting of commercially pure titanium

Shreyes N. Melkote et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Automation & Control Systems

Investigation on the influence of material microstructure on cutting force and bur formation in the micro cutting of copper

Xian Wu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Chemistry, Physical

Deformation anisotropy and associated mechanisms in rolling textured high purity titanium

Jong Woo Won et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cutting Characteristics of Zr-Based Bulk Metallic Glass

D. X. Han et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of Pipeline Steels with Acicular Ferrite Microstructure and Ferrite-bainite Dual-phase Microstructure

Xiurong Zuo et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Slip band-grain boundary interactions in commercial-purity titanium

Y. Guo et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical modelling of micro-machining of f.c.c. single crystal: Influence of strain gradients

Murat Demiral et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simulation of orthogonal micro-cutting of FCC materials based on rate-dependent crystal plasticity finite element model

S. A. Tajalli et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Metal Additive Manufacturing: A Review

William E. Frazier

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites

Omyma El-Kady et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Relaxor-based ferroelectric single crystals: Growth, domain engineering, characterization and applications

Enwei Sun et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Engineering of ZnCo-layered double hydroxide nanowalls toward high-efficiency electrochemical water oxidation

Ying Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the Physics of Machining Titanium Alloys: Interactions between Cutting Parameters, Microstructure and Tool Wear

Mohammed Nouari et al.

METALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

FE/SPH modelling of orthogonal micro-machining of f.c.c. single crystal

S. Abolfazl Zahedi et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

添加到收藏夹

Article Automation & Control Systems

The effects of grain size and feed rate on notch wear and burr formation in wrought Alloy 718

S. Cedergren et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Mechanical

The physics of fatigue crack initiation

Michael D. Sangid

INTERNATIONAL JOURNAL OF FATIGUE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys: Ti-6Al-4V and Ti-555

M. Nouari et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)

添加到收藏夹

Article Engineering, Industrial

An enhanced constitutive material model for machining of Ti-6Al-4V alloy

Rui Liu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing

D. V. Gunderov et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Engineering, Mechanical

Understanding the friction and wear mechanisms of bulk metallic glass under contact sliding

M. L. Rahaman et al.

WEAR (2013)

添加到收藏夹

Article Engineering, Mechanical

Machinability study of first generation duplex (2205), second generation duplex (2507) and austenite stainless steel during drilling process

J. Nomani et al.

WEAR (2013)

添加到收藏夹

Article Chemistry, Physical

Influence of Material Microstructures in Micromilling of Ti6Al4V Alloy

Aldo Attanasio et al.

MATERIALS (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nano-scale machining of polycrystalline coppers - effects of grain size and machining parameters

Jing Shi et al.

NANOSCALE RESEARCH LETTERS (2013)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Effect of Microstructure on Cutting Force and Chip Formation during Machining of Ti-6Al-4V Alloy

Shoujin Sun et al.

MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4 (2013)

添加到收藏夹

Review Engineering, Biomedical

Development of new metallic alloys for biomedical applications

Mitsuo Niinomi et al.

ACTA BIOMATERIALIA (2012)

添加到收藏夹

Article Automation & Control Systems

An image-based methodology to establish correlations between porosity and cutting force in micromilling of porous titanium foams

M. Abolghasemi Fakhri et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

添加到收藏夹

Article Automation & Control Systems

Methodology for evaluating effects of material characteristics on machinability-theory and statistics-based modelling applied on Alloy 718

Stefan Olovsjo et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure, texture and magnetic properties of strip-cast 1.3% Si non-oriented electrical steels

Yuanxiang Zhang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machining of coarse grained and ultra fine grained titanium

R. Lapovok et al.

JOURNAL OF MATERIALS SCIENCE (2012)

添加到收藏夹

Article Engineering, Manufacturing

Influence of Heat Treatment on the Machinability of Titanium Alloys

M. Armendia et al.

MATERIALS AND MANUFACTURING PROCESSES (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

A simple mechanical model for grain boundary sliding in nanocrystalline metals

E. N. Borodin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Adiabatic shear banding in AISI 1045 steel during high speed machining: Mechanisms of microstructural evolution

C. Z. Duan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Engineering, Mechanical

Influence of microstructure on wear behaviour of uncoated WC tools in turning of Alloy 718 and Waspaloy

S. Olovsjo et al.

WEAR (2012)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Effect of Crystal Grain Size in Stainless Steel on Cutting Process in Micromilling

Takafumi Komatsu et al.

FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)

添加到收藏夹

Article Multidisciplinary Sciences

Modeling and Assessment of Some Factors that Influence Surface Roughness for the Machining of Particle Reinforced Metal Matrix Composites

Metin Kok

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2011)

添加到收藏夹

Article Engineering, Industrial

Laser assisted turning of Titanium Metal Matrix Composite

R. Bejjani et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)

添加到收藏夹

Article Automation & Control Systems

Modelling the effect of surface roughness factors in the machining of 2024Al/Al2O3 particle composites based on orthogonal arrays

Metin Kok

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Manufacturing

Identification of factors that dominate size effect in micro-machining

A. J. Mian et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)

添加到收藏夹

Article Engineering, Manufacturing

Study of cutting deformation in machining nickel-based alloy Inconel 718

Gao Dong et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Titanium alloy production technology, market prospects and industry development

Cui Chunxiang et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Engineering, Manufacturing

Porosity and cutting forces: from macroscale to microscale machining correlations

O. R. Tutunea-Fatan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fundamental factors on formation mechanism of dislocation arrangements in cyclically deformed fcc single crystals

P. Li et al.

PROGRESS IN MATERIALS SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation mechanisms of cyclic saturation dislocation patterns in [001], [011] and [(1)over-bar 1 1] copper single crystals

P. Li et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Automation & Control Systems

A comparative study of material phase effects on micro-machinability of multiphase materials

Aamer J. Mian et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Manufacturing

Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti-6Al-4V

Mohammad Sima et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)

添加到收藏夹

Article Engineering, Manufacturing

CUTTING FORCES AND SURFACE ROUGHNESS IN MACHINING Al/SiCp COMPOSITES OF VARYING COMPOSITION

Uday A. Dabade et al.

MACHINING SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Slip Systems and Initiation of Plasticity in a Body-Centered-Cubic Titanium Alloy

Alexis C. Lewis et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)

添加到收藏夹

Article Engineering, Mechanical

The effect of grain size and hardness of wrought Alloy 718 on the wear of cemented carbide tools

S. Olovsjo et al.

WEAR (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation mechanism of lamellar chips during machining of bulk metallic glass

M. Q. Jiang et al.

ACTA MATERIALIA (2009)

添加到收藏夹

Article Engineering, Manufacturing

Multi-step 3-D finite element modeling of subsurface damage in machining particulate reinforced metal matrix composites

Chinmaya R. Dandekar et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Chemistry, Physical

Dislocation dynamics simulations of precipitation hardening in Ni-based superalloys with high gamma ' volume fraction

A. Vattre et al.

INTERMETALLICS (2009)

添加到收藏夹

Article Automation & Control Systems

A Taylor-based plasticity model for orthogonal machining of single-crystal FCC materials including frictional effects

Eralp Demir

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Mechanical

An improved multi-objective identification of Johnson-Cook material parameters

A. S. Milani et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)

添加到收藏夹

Article Engineering, Industrial

Analysis of chip formation mechanism in machining of Al/SiCp metal matrix composites

Uday A. Dabade et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Industrial

Cutting forces and TEM analysis of the generated surface during machining metal matrix composites

S. Kannan et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Industrial

Evaluation of machinability in turning of microalloyed and quenched-tempered steels: Tool wear, statistical analysis, chip morphology

A. Ebrahimi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Porous Metals and Metallic Foams: Current Status and Recent Developments

Louis-Philippe Lefebvre et al.

ADVANCED ENGINEERING MATERIALS (2008)

添加到收藏夹

Article Engineering, Manufacturing

A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V

Madalina Calamaz et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

添加到收藏夹

Review Engineering, Manufacturing

A review of cryogenic cooling in machining processes

Yakup Yildiz et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

添加到收藏夹

Article Engineering, Manufacturing

Machining of metal matrix composites: Effect of ceramic particles on residual stress, surface roughness and chip formation

A. Pramanik et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

添加到收藏夹

Article Engineering, Manufacturing

Taylor-based model for micro-machining of single crystal fcc materials including frictional effects-Application to micro-milling process

Eralp Demir

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

添加到收藏夹

Article Automation & Control Systems

The effects of microalloyed steel pre-heat treatment on microstructure and machinability

Halil Demir

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)

添加到收藏夹

Article Engineering, Manufacturing

Surface integrity of ultra-precision diamond turned Ti (commercially pure) and Ti alloy (Ti-6Al-4V)

J. P. Colafemina et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

What is behind the inverse Hall-Petch effect in nanocrystalline materials?

C. E. Carlton et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fatigue limit and crack growth in ultra-fine grain metals produced by severe plastic deformation

A. Vinogradov

JOURNAL OF MATERIALS SCIENCE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites

K. Palanikumar et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Engineering, Manufacturing

Interfacial design of Cu/SiC composites prepared by powder metallurgy for heat sink applications

Th. Schubert et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Engineering, Manufacturing

Micromilling: material microstructure effects

K. B. Popov et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)

添加到收藏夹

Article Engineering, Manufacturing

Optimal machining conditions for turning of particulate metal matrix composites using Taguchi and response surface methodologies

K. Palanikumar et al.

MACHINING SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of nanocrystalline materials

MA Meyers et al.

PROGRESS IN MATERIALS SCIENCE (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations

A. Ma et al.

ACTA MATERIALIA (2006)

添加到收藏夹

Article Engineering, Aerospace

Nickel-based superalloys for advanced turbine engines: Chemistry, microstructure, and properties

TM Pollock et al.

JOURNAL OF PROPULSION AND POWER (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni-Fe-W alloys

KR Sriraman et al.

MATERIALS SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cutting characteristics of bulk metallic glass

K Fujita et al.

MATERIALS TRANSACTIONS (2005)

添加到收藏夹

Article Engineering, Manufacturing

Light emission, chip morphology, and burr formation in drilling the bulk metallic glass

M Bakkal et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation

F Bridier et al.

ACTA MATERIALIA (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Machining of a Zr-Ti-Al-Cu-Ni metallic glass

M Bakkal et al.

SCRIPTA MATERIALIA (2004)

添加到收藏夹

Article Chemistry, Physical

Oxidation and crystallization of Zr-based bulk metallic glass due to machining

M Bakkal et al.

INTERMETALLICS (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain-size dependence of millimeters to nanometers

H Conrad

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)

添加到收藏夹

Article Engineering, Manufacturing

Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass

M Bakkal et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)

添加到收藏夹

Article Engineering, Manufacturing

On the modeling and analysis of machining performance in micro-endmilling, Part I: Surface generation

MP Vogler et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2004)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Role of phase and grain size on chip formation and material work hardening during machining of single and dual phase steels

R M'Saoubi et al.

IRONMAKING & STEELMAKING (2004)

添加到收藏夹

Article Engineering, Mechanical

CBN cutting tool wear during machining of particulate reinforced MMCs

I Ciftci et al.

WEAR (2004)

添加到收藏夹

Article Engineering, Industrial

An energy based analytical force model for orthogonal cutting of metal matrix composites

HA Kishawy et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigations on the machining of sintered titanium foams utilizing face milling and peripheral grinding

M Bram et al.

ADVANCED ENGINEERING MATERIALS (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chip and built-up edge formation in the machining of in situ Al4C3-Al composite

Y Ozcatalbas

MATERIALS & DESIGN (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of reinforcement in ultra-precision machining of Al6061/SiC metal matrix composites

CF Cheung et al.

SCRIPTA MATERIALIA (2002)

添加到收藏夹

Article Engineering, Industrial

Drilling of (Al2O3)p/6061 metal matrix composites

M Ramulu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hall-Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel

CA Schuh et al.

SCRIPTA MATERIALIA (2002)

添加到收藏夹

Article Engineering, Mechanical

Validation of constitutive models applicable to aluminium foams

AG Hanssen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2002)

添加到收藏夹

Article Engineering, Mechanical

Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling

A Molinari et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

添加到收藏夹

Article Engineering, Industrial

Deformation behaviour of aluminium single crystals in ultraprecision diamond turning

S To et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

添加到收藏夹

Article Nanoscience & Nanotechnology

Magnesium - Properties - applications - potential

BL Mordike et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

添加到收藏夹

Article Engineering, Mechanical

MD Simulation of nanometric cutting of single crystal aluminum-effect of crystal orientation and direction of cutting

R Komanduri et al.

WEAR (2000)

添加到收藏夹

Article Engineering, Mechanical

MD simulation of indentation and scratching of single crystal aluminum

R Komanduri et al.

WEAR (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.