相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Friction stir-based additive manufacturing
Rajiv S. Mishra et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2022)
Additive friction stir deposition of AZ31B magnesium alloy
Sameehan S. Joshi et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
A multi modal approach to microstructure evolution and mechanical response of additive friction stir deposited AZ31B Mg alloy
Sameehan S. Joshi et al.
SCIENTIFIC REPORTS (2022)
Additive friction stir deposition: a deformation processing route to metal additive manufacturing
Hang Z. Yu et al.
MATERIALS RESEARCH LETTERS (2021)
A meshfree computational framework for the numerical simulation of the solid -state additive manufacturing process, additive friction stir-deposition (AFS- D)
G. G. Stubblefield et al.
MATERIALS & DESIGN (2021)
Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31B magnesium alloy
Tso-Chang Wu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Numerical investigation on thermo-mechanical and material flow characteristics in friction stir welding for aluminum profile joint
Qipeng Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions
Yuan Li et al.
MATERIALS & DESIGN (2021)
Solidification and microstructure evolution in additively manufactured H13 steel via directed energy deposition: Integrated experimental and computational approach
Sameehan S. Joshi et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Analysis of defect formation mechanisms and their effects on weld strength during friction stir welding of Al 6061-T6 via experiments and finite element modeling
Abhishek Ajri et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Computational Assessment of Thermokinetics and Associated Microstructural Evolution in Laser Powder Bed Fusion Manufacturing of Ti6Al4V Alloy
Mangesh Pantawane et al.
SCIENTIFIC REPORTS (2020)
Influence of tool tilt angle on heat transfer and material flow in friction stir welding
Ming Zhai et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Modeling the dissimilar material flow and mixing in friction stir welding of aluminum to magnesium alloys
Chunliang Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
The thermodynamic analytical models for steady-state of continuous drive friction welding based on the maximum entropy production principle
J. T. Xiong et al.
APPLIED THERMAL ENGINEERING (2019)
Modeling and experimental investigation on friction surfacing of aluminum alloys
Seyedeh Marjan Bararpour et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Thermomechanical modeling of friction stir welding in a Cu-DSS dissimilar joint
V. Shokri et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Potentials and strategies of solid-state additive friction-stir manufacturing technology: A critical review
F. Khodabakhshi et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
An analytical model to calculate the peak temperature for friction stir welding
Jinwen Qian et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2017)
Analytical description of heat generation and temperature field during the initial stage of rotary friction welding
Peng Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Recrystallization and texture evolution of cold-rolled AZ31 Mg alloy treated by rapid thermal annealing
Yanbin Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
A phenomenologically based material flow model for friction stir welding
E. Hoyos et al.
MATERIALS & DESIGN (2016)
Relating grain size to the Zener-Hollomon parameter for twin-roll-cast AZ31B alloy refined by friction stir processing
A. H. Ammouri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
A mechanism-dependent material model for the effects of grain growth and anisotropy on plastic deformation of magnesium alloy AZ31 sheet at 450 °C
Alexander J. Carpenter et al.
ACTA MATERIALIA (2014)
Friction surfacing-A review
J. Gandra et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Hot deformation behavior of hot-rolled AZ31 and AZ61 magnesium alloys
M. L. Olguin-Gonzalez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Flow softening, twinning and dynamic recrystallization in AZ31 magnesium
X. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Friction Stir Welded AZ31 Magnesium Alloy: Microstructure, Texture, and Tensile Properties
S. H. Chowdhury et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Numerical simulation of DC casting of AZ31 magnesium slab at different casting speeds
Wenyi Hu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2013)
A Model to Predict the Resulting Grain Size of Friction-Stir-Processed AZ31 Magnesium Alloy
Basil M. Darras
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Influence of strain rate on hot deformation behaviour and texture evolution of AZ31B
M. Sanjari et al.
MATERIALS SCIENCE AND TECHNOLOGY (2012)
Influence of extrusion parameters on grain size and texture distributions of AZ31 alloy
Weiqin Tang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Thermal Profiling Using Infrared Thermography in Friction Surfacing
H. Khalid Rafi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets
Sangbong Yi et al.
ACTA MATERIALIA (2010)
Grain growth kinetics of a fine-grained AZ31 magnesium alloy produced by hot rolling
Qing Miao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Constitutive analysis of AZ31 magnesium alloy plate
Yu Kun et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2010)
Constants for hot deformation constitutive models for recent experimental data
K. E. Tello et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Investigation of the thermal field in micro friction surfacing
V. I. Vitanov et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Characteristics of hot tensile deformation and microstructure evolution of twin-roll cast AZ31B magnesium alloys
Liu Zhi-min et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters
L. Commin et al.
ACTA MATERIALIA (2009)
Microstructure evolution in hot worked and annealed magnesium alloy AZ31
A. G. Beer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Processing maps for hot deformation of rolled AZ31 magnesium alloy plate: Anisotropy of hot workability
Y. V. R. K. Prasad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Recrystallization and grain growth of deformed magnesium alloy
C. W. Su et al.
PHILOSOPHICAL MAGAZINE (2008)
Thermal modelling of friction stir welding
H. B. Schmidt et al.
SCRIPTA MATERIALIA (2008)
Transferring mechanism of the coating rod in friction surfacing
X. M. Liu et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Analysis of high-temperature deformation and microstructure of an AZ31 magnesium alloy
S. Spigarelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Model for predicting heat generation and temperature in friction stir welding from the material properties
P. A. Colegrove et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2007)
Flow softening behavior during high temperature deformation of AZ31Mg alloy
Byoung Ho Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Dynamic recrystallization in AZ31 magnesium alloy
S. M. Fatemi-Varzaneh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Mechanical behaviour and microstructural evolution of magnesium alloy AZ31 in tension at different temperatures
S. B. Yi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding
R Nandan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Crystallographic texture evolution of three wrought magnesium alloys during equal channel angular extrusion
SR Agnew et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Modelling heat flow around tool probe in friction stir welding
H Schmidt et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2005)
High temperature compressive properties over a wide range of strain rates in an AZ31 magnesium alloy
K Ishikawa et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
SR Agnew et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31 Mg alloys
CI Chang et al.
SCRIPTA MATERIALIA (2004)
Grain refining of magnesium alloy AZ31 by rolling
TC Chang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)