☆ 4.7 Article

Process parameter sensitivity of the energy absorbing properties of additively manufactured metallic cellular materials

MATERIALS & DESIGN (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Additive manufacturing of biomimetic Titanium-Tantalum lattices for biomedical implant applications

Nicolas Soro et al.

Summary: In this study, 3D lattices designed with gyroid, diamond, and Schwarz primitive minimal surfaces are fabricated using laser powder-bed fusion and a blend of titanium-tantalum powder. The processability, compressive mechanical properties, and in vitro biological properties of the dense and lattice samples are evaluated. The results show that the Ti-25Ta lattices exhibit higher ductility and absence of toxic elements compared to the conventional Ti-6Al-4V alloy. The designs also demonstrate advantageous mechanical properties and higher elastic admissible strains for bone implants compared to conventional lattices.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and biological properties of enhanced porous scaffolds based on triply periodic minimal surfaces

Sijia Zou et al.

Summary: An enhanced porous scaffold based on triply periodic minimal surfaces (TPMS) is proposed and manufactured using laser powder bed fusion (LPBF). The scaffold features smooth surfaces, controllable pores, and excellent mechanical properties. Experimental results demonstrate that the enhanced porous scaffold meets the requirements of human bones in terms of elastic modulus, compressive strength, and permeability. It also exhibits good biocompatibility.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ synchrotron X-ray analysis of metal Additive Manufacturing: Current state, opportunities and challenges

Chrysoula Ioannidou et al.

Summary: Additive Manufacturing (AM), including Laser-Powder Bed Fusion (L-PBF), Electron beam-Powder Bed Fusion (E-PBF), and Directed Energy Deposition (DED), is a significant technology for manufacturing metallic materials. In-situ synchrotron X-ray characterization is a suitable tool for understanding the microstructure evolution during these processes. This article provides an overview of the research on metal PBF and DED using in-situ synchrotron X-ray imaging, diffraction, and small-angle scattering, highlighting the state of the art, instrumentation, challenges, and knowledge gaps.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Perspectives on additive manufacturing for dynamic impact applications

Alexander E. Medvedev et al.

Summary: Applications involving high strain rates are unique and important for protecting infrastructure and personnel in dynamic impact scenarios. Research on additive manufacturing methods for improving structural performance under high strain rate conditions is relatively limited but has great potential.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Automation & Control Systems

Experimental and numerical investigation on lattice structures fabricated by selective laser melting process under quasi-static and dynamic loadings

Reza Saremian et al.

Summary: This paper investigates the mechanical properties of three lattice structures under quasi-static and dynamic loadings. Experimental and numerical results show that the Rhombic dodecahedron lattice structure has advantages in impact resistance, while the truncated cuboctahedron lattice structure performs better under dynamic loading.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Impact response of metallic stacked origami cellular materials

J. A. Harris et al.

Summary: Cellular materials show promise for structural protection and impact energy absorption, with origami-based geometries offering a new approach to design. Experimentation and simulation studies on different fold configurations provide valuable insights into the performance of materials, guiding the production of cellular materials with specific functions.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Characteristics of Superimposed 316L Lattice Structures under Static and Dynamic Loading

Chao Chang et al.

Summary: Additive manufacturing of stainless steel 316 L lattice structures using selective laser melting shows potential for energy absorption in engineering applications. Experimental testing and numerical simulations demonstrate that the vertical truss in the lattice plays a critical role in compression, leading to superior energy absorption capacity in superimposed structures compared to other lattice designs. This research provides new insights for the design of lattice structures in various engineering applications.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multiscale investigation of the influence of geometrical imperfections, porosity, and size-dependent features on mechanical behavior of additively manufactured Ti-6Al-4V lattice struts

Atikom Sombatmai et al.

Summary: This study investigated the effects of five different defects on a single strut, with undersizing/oversizing being the primary factor affecting the discrepancy between experiments and numerical predictions. Diameter variation and offset of the cross section were dominant for small struts, while the presence of voids had a negligible impact on elastic and initial yielding responses. Geometrical inaccuracies and varied properties had comparable effects, with the former being more dominant in smaller samples. The sensitivity from the mCT voxel size affected both global behaviors and localization.

MATERIALS & DESIGN (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Metal additive manufacturing in aerospace: A review

Byron Blakey-Milner et al.

Summary: Metal additive manufacturing in aerospace industry offers significant opportunities for cost reduction, material innovation, design flexibility, and lightweighting. The technology not only enhances performance but also simplifies design and manufacturing processes.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of the dynamic response of triply periodic minimal surfaces subjected to high strain-rate compression

Sara AlMahri et al.

Summary: This study investigated the mechanical properties of cellular structures based on five different TPMS sheet-based designs under quasi-static and dynamic loading conditions. Results show that all structures exhibited enhanced mechanical performance under dynamic loading, with the Diamond structure demonstrating the highest specific energy absorption value. This suggests that TPMS structures could be promising candidates for applications involving high strain-rate loading.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Compressive behavior of selective laser melting printed Gyroid structures under dynamic loading

Xue Li et al.

Summary: The compressive behavior of Gyroid structures fabricated by SLM under different loading rates was investigated experimentally and numerically. The deformation process was recorded using DIC method, and loading rate sensitivities of yield stress, plateau stress, and specific energy absorption were discussed. Numerical simulations revealed deformation mechanisms and relative density-stress relationships, showing that Gyroid structures exhibit superior energy absorption abilities compared to other cellular materials, with potential applications in protective structures under compression.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of build direction and geometric optimization in laser powder bed fusion of Inconel 718 structures with internal channels

Galina Kasperovich et al.

Summary: A laser powder bed fusion strategy was developed to manufacture small channels with high dimensional accuracy in Inconel 718 structures. By optimizing the contour parameters and cross-section shape systematically, significant improvement in dimensional accuracy was achieved. Surface quality of external and internal surfaces were investigated, resulting in the best properties for inclinations below 45 degrees.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Mechanics

Metallic stacked origami cellular materials: Additive manufacturing, properties, and modelling

J. A. Harris et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

Impact response of additively manufactured metallic hybrid lattice materials

J. A. Harris et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting

K. Geenen et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation on Porosity and Microhardness of 316L Stainless Steel Fabricated by Selective Laser Melting

Shahir Mohd Yusuf et al.

METALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material

Shaaz Ghouse et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Engineering, Manufacturing

Prediction of lack-of-fusion porosity for powder bed fusion

Ming Tang et al.

ADDITIVE MANUFACTURING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading

Thomas Tancogne-Dejean et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Engineering, Mechanical

Energy absorption in lattice structures in dynamics: Experiments

Zuhal Ozdemir et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

The metallurgy and processing science of metal additive manufacturing

W. J. Sames et al.

INTERNATIONAL MATERIALS REVIEWS (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fabrication of NiTi through additive manufacturing: A review

Mohammad Elahinia et al.

PROGRESS IN MATERIALS SCIENCE (2016)

添加到收藏夹

Article Engineering, Mechanical

Effect of advancing direction on fatigue life of 316L stainless steel specimens treated by double-sided laser shock peening

C. Correa et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

添加到收藏夹

Article Mechanics

Novel stacked folded cores for blast-resistant sandwich beams

M. Schenk et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

添加到收藏夹

Article Engineering, Industrial

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

Wayne E. King et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Geometry of Miura-folded metamaterials

Mark Schenk et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2013)

添加到收藏夹

Article Biochemical Research Methods

NIH Image to ImageJ: 25 years of image analysis

Caroline A. Schneider et al.

NATURE METHODS (2012)

添加到收藏夹

Article Engineering, Mechanical

An investigation into the compressive properties of stainless steel micro-lattice structures

K. Ushijima et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2011)

添加到收藏夹

Article Engineering, Mechanical

The quasi-static and blast response of steel lattice structures

M. Smith et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2011)

添加到收藏夹

Article Engineering, Manufacturing

The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures

S. Tsopanos et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)

添加到收藏夹

Article Engineering, Mechanical

The Mechanical Properties of Sandwich Structures Based on Metal Lattice Architectures

Y. Shen et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2010)

添加到收藏夹

Review Multidisciplinary Sciences

Micro-architectured materials: past, present and future

N. A. Fleck et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)

添加到收藏夹

Article Engineering, Mechanical

The quasi-static and blast loading response of lattice structures

S. McKown et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)

添加到收藏夹

Article Mechanics

Dynamic Compressive response of stainless-steel square honeycombs

G. J. McShane et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2007)

添加到收藏夹

Article Engineering, Mechanical

The response of clamped sandwich beams subjected to shock loading

DD Radford et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

The out-of-plane compressive behavior of metallic honeycombs

F Côté et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Energy absorption of an egg-box material

VS Deshpande et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Inertia effects in uniaxial dynamic compression of a closed cell aluminium alloy foam

PJ Tan et al.

MATERIALS SCIENCE AND TECHNOLOGY (2002)

添加到收藏夹

Article Mechanics

Collapse of truss core sandwich beams in 3-point bending

VS Deshpande et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effective properties of the octet-truss lattice material

VS Deshpande et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Foam topology bending versus stretching dominated architectures

VS Deshpande et al.

ACTA MATERIALIA (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.